Handling devices - Import export

The EV-300 electro-pneumatic lifting beam is an autonomous device intended for handling any glass on site or workshop.

Have you ever gone on a trip and only took one charger for several devices? If so, then you probably know exactly how many problems it brings. Thanks to the universal solution presented by the manufacturer Dudao, you no longer have to be afraid of a similar situation. One charger will handle up to three devices, and in addition will charge them at high speed and protect against overcharging.

Have you ever gone on a trip and only took one charger for several devices? If so, then you probably know exactly how many problems it brings. Thanks to the universal solution presented by the manufacturer Duzzona, you no longer have to be afraid of a similar situation. One charger will handle up to three devices, and in addition will charge them at high speed and protect against overcharging. In addition, the electronic components of the charger were made in GaN technology, i.e. they are based on gallium nitride, not on silicon. GaN means better work efficiency and lower energy consumption!

Have you ever gone on a trip and only took one charger for several devices? If so, then you probably know exactly how many problems it brings. Thanks to the universal solution presented by the manufacturer Duzzona, you no longer have to be afraid of a similar situation. One charger will handle up to three devices, and in addition will charge them at high speed and protect against overcharging. In addition, the electronic components of the charger were made in GaN technology, i.e. they are based on gallium nitride, not on silicon. GaN means better work efficiency and lower energy consumption!

Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Other information Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0 Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the Zipper E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Zipper Zipper E-Chain® Short installation time: Lightning fast opening and closing of lids with zipper Zipper lid can be separated and joined in any chain link Small pitch for low-noise, silent operation High accelerations: 100 m/s² and more Interior separation possible Zipper E-Tube resistant against chips and dirt Closed E-Tube with zip-open system Protection against dirt and chips Lightning fast opening of the lid in a band Modular design - simple lengthening and shortening Small division for low-noise, silent operation, high accelerations Typical industrial sectors and applications Automatic insertion machines Semiconductor devices Linear motors, handling systems Any kind of technical equipment Measuring instruments Machine tools (Zipper E-tube) Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0

light housings light rectifiers electronic device housings handles and hooks

Whether for use in a workshop, in living or working spaces – the combination of a robust construction, sound workmanship and discreet design harmoniously integrates in any environment, and the thermally insulated carrying handle makes the device quick and easy to transport. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 50 M. For more targeted warmth, the heating capacity can be increased in two stages up to 9 kW. If required, the fan can also be used in sole fan operation without heating function. The TDS 50 M is powered by three-phase current, which is, however, not supplied to a conventional heating coil but to a durable PTC ceramic heating element integrated in this electric heater. In direct comparison, this does not only entail a more homogenous hot air current and a lower noise generation – the ceramic PTC heater battery also offers many additional assets.

ELECTRIC HEATER FAN TDS 29 EWarm. Warmer. Hot! Ideal mobile heating solution. The mobile heater TDS 29 E is an ideal heating solution that can be applied basically everywhere. Equipped with a hard-wearing housing and a convenient carrying handle, the robust device impresses when heating construction trailers, workshops, warehouses, halls and boathouses. Via the integrated thermostat control, the warm air flow of the TDS 29 E can be infinitely and precisely adjusted to the desired temperature. The two-stage power control for needs-based adjustment of the heat output allows for perfect temperature control of every room. Beyond that, fan operation without heating function is also possible. Like all devices of that series, the TDS 29 E produces non-condensing heat without consuming oxygen or producing combustion gases – this makes it particularly suitable for indoor use. For here, the use of oil and gas heating devices is often undesirable or even prohibited.

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof (not guaranteed to be completely watertight). Virtually invisible when installed. EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GDZ cover can be opened and closed by one person. Central locking system: HAGODECK Type BV-GDZ steel cover is equipped with a central locking system. The cover can be opened from above using a special socket key and easily unlocked from underneath using the built-in handle. Safety device fitted to prevent the open cover from closing. Applications: For covers that need to be opened from above and below, quickly and without particular effort, e.g. in underground passageways, in underground railways, power stations, telecommunication or military facilities...

Venjakob/Nutro offers a wide spectrum of material handling systems, from simple, manual systems to fully automatic "non-contact" operation. Venjakob/Nutro is able to provide customer-specific constructions for automatic feeding and delivery as well as integrate transport devices or material handling robots in the spraying plant. The VEN BRUSH system equipment Solutions possible with the VEN MOVE series cover several functions such as rotating, turning, transferring, stacking, feeding, accumulation, separation or allocation.

New lightweight and handy device with practical handle with additional controls for rapid gas and electronic ignition opening. The high power and ease of use of this device allows fast retraction of thermo plastic films of any thickness and the packaging of large products. FEATURES - Structure with double insulation for continuous use without overheating and without risk of burns; - Terminal with 360° rotation for use in any position; - 8 meter pipe with quick release; - Safety valve included (in case of breakage block the gas); - Practical carrying case; - Noise level 83db.

COMFORT DEHUMIDIFIER TTK 75 EPleasantly unobtrusive, outstanding performance... If you are looking for an equally cost-efficient and reliable comfort dehumidifier without frills and furbelows, but with easy handling and high dehumidification performance for the permanent dry keeping even of larger heated living, office, sanitary or basement rooms, the TTK 75 E is one of our best recommendations. To handle this drying device you don't have to study endless operating instructions. Just set it up, switch it on, adjust the dehumidification performance, ready. Once commissioned, the TTK 75 E does exactly what it's meant to, and is pretty good at it, too. This comfort dehumidifier is equipped with an especially powerful fan, which can feed large amounts of air for dehumidification to the condenser. Therefore, the TTK 75 E comes with a high air circulation-dehumidification performance ratio, making it the ideal solution for the dry keeping of large-volume indoor spaces.

The galvanized steel case with chassis is transportable and has an inclinable drum for variably aligned up to a vertical flow position. In this manner the air current can be directed specifically at high wall or ceiling sections. So the TTW 35000 S is a flexible usable solution at theatrical ventilation on stage, at movie and photo sets. Practical advantages: A cost-saving option for semi-professional ventilation applications Air circulation capacity to 32,400 m³/h Plug-in devices easy to handle Adjustable inclination angle of the flow direction from horizontal to vertical position Flexible change of location by means of carriage construction

Due to its high air flow rate and advanced PTC heater battery technology, the high-performance rapid heater TDS 30 M is ideally suited for quickly heating large, cold rooms. Whether for use in a workshop, in living or working spaces – the combination of a robust construction, sound workmanship and discreet design harmoniously integrates in any environment, and the thermally insulated carrying handle makes the device quick and easy to transport. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 30 M. For more targeted warmth, the heating capacity can be increased in two stages up to 5 kW. If required, the fan can also be used in sole fan operation without heating function.

The 44 Kg TTW 25000 S barrel fan with dimension 1,060*525*1,140mm is designed to introduce a cost efficient option for semi-professional use both indoors and out being no less than the similar TTW series that are much more professional and expensive.In places where there is a requirement for high air exchange rates within investment expenditure such as ventilation tasks in production environments, agriculture or storage areas,these barrel fans are quite efficient. The device with a galvanized steel case and a chassis is also equipped with an inclined drum capable of being variably aligned for vertical flow positions,making it easily portable.This enables the direction of air current at high wall or ceiling sections as well. Practical advantages: A cost-saving option for semi-professional ventilation applications Air circulation capacity to 27,600 m³/h Plug-in devices easy to handle

Working range Blind rivets up to 4 mm Ø all materials. Not suitable for stainless steel CAP® blind rivets. Technical data Weight: 1.2 kg Operating air pressure: 6 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: 0.8-1.2 ltr. per rivet (0,2 ltr. compr. air) Traction power: 5.200 N at 5 bar Stroke: 15 mm Nosepieces/accessories Nosepieces: 16/18, 16/24, 16/27 and 16/29 1 set of jaws, 1 spent mandrel bottle, 1 wrench each of MSU and MSZ, Maintenance instructions with spare parts list Features • Hydraulic head in aluminium with wear-proof cylinder surface • Pneumatic cylinder made of die cast aluminium • The piston made of hardened and hard chromium plated steel make the device easy to handle and wear-proof • Compact seals are wear-proof for a long service life • Fast venting valve for fast return and high working sequence • Low-noise pneumatic switching • Simple, low-interruption valve design • Hydraulic head can be adjusted by 360°

Mobile drawer cabinet 4x castor wheels Ø 125 mm (2x with locking device) grip handle 7x drawers front 100 mm drawers with full extension 100%, load capacity each drawer 50 kg, WxDxH 680x500x1004 mm

Coil Flipper 3 is an efficient patented device for coil handling. Thanks to its innovative design, it can lift and rotate coils from the horizontal to the vertical position in one simple movement.

Coil Spider is a safe and small lifting device that, due to its uptodate features, can hook from the outside rolled and drawn coils (either rewinded or not). Coil Spider is equipped with an automatic release and hiding guns (patented) which combined with its reduced dimensions allow it to unload goods from trucks and payoffs quickly and safely also in case of very low cranes.

EASY HOOK lifting device allows the handling of any loads in a fully safe condition. The releasing device allows the operator to discharge the loads automatically, in a very fast and safe way.

Handling tunnel segments by vacuum technology. Aerolift designs customised lifting solutions for the complete handling process of precast tunnel segments. The lifting solutions are used during production, transhipment and in the tunnel boring machine (TBM). The unique features of vacuum handling are highly suitable to handle concrete products, such as tunnel segments. Why choose vacuum handling Specially for concrete products, vacuum offers many interesting advantages compared to other lifting methods: Demoulding after 8 to 10 hours Demoulding, lifting, and turning by one lifting device Efficient during handling and the use of storage space No damage or deformation to the tunnel segment Less chance of cracks in the concrete Easy and fast handling Reuse of the same mould Reduced chance of accidents, because no one has to be near the load before, during or after handling Very safe due to the high safety standards of vacuum handling Handling tunnel segments during production

Based on a individual needs assessment we tailor-make briquetting solutions including peripheral devices. RUF lifting and tilting devices optimize and automatize the flow of bulk materials. RUF can consider any individual customer needs.

The machine allows labeling with self-adhesive labels on large cylindrical or shaped bottles and drums, from the food sector to chemicals. It enables working with products of different shapes and sizes with a few simple adjustments. These machines are always tailored to the specifications of the product to be labeled, whether round or rectangular, with one or two label distribution groups. Optional features include non-standard size conveyor belts, pulling motorizations, fixed or rotating accumulation tables, handle centering devices, thermal transfer or ink-jet printing systems. Self-adhesive stations driven by stepper motors for maximum application precision, electronic board for label start signal, precision electronic adjustment of label positioning, motorized top conveyor for stabilizing square-rectangular containers. Production: from 2,000/h to 12,000/h.

The classic of service outlets Device covers for floor boxes OBO's service outlets supply workstations and other points in the middle of the room with power and data connections via the floor. The tried-and-tested GES9 underfloor service outlets now impress with a series of fundamental product improvements. Two versions are now available for opening the covers of the service outlets. The proven opening mechanism with handle is integrated in the cord outlet. Alternatively, service outlets with latching slides are available. This allows the lid to be opened effortlessly at any time. The new lid design also ensures greater stability of the entire service outlet. The floor covering recess in the lid can be easily increased from 5 mm to 10 mm by using the enclosed spacer frames.

The classic of service outlets Device covers for floor boxes OBO's service outlets supply workstations and other points in the middle of the room with power and data connections via the floor. The tried-and-tested GES9R underfloor service outlets now impress with a series of fundamental product improvements. Two versions are now available for opening the covers of the service outlets. The proven opening mechanism with handle is integrated in the cord outlet. Alternatively, service outlets with latching slides are available. This allows the lid to be opened effortlessly at any time. The new lid design also ensures greater stability of the entire service outlet. The floor covering recess in the lid can be easily increased from 5 mm to 10 mm by using the enclosed spacer frames.

The K4802 Manual Vertical Coil Lifter from KEDY is a manual handling device designed to lift and move large coils of steel, aluminum and other materials weighing up to 5 tons with an inner diameter range of 500mm to 600mm. It has two adjustable arms that are inserted into the center of the coil and locked in place for added safety. The operator simply moves the handle and the arms tracts onto the coil, allowing for easy lifting and movement with a crane. The K4802 is built to last with high-quality materials and construction, making it a durable and efficient tool for industrial settings. Contact KEDY to learn more about this product.

Constant changes in our customers' markets mean that solutions must be quickly implemented. Robot applications by ruhlamat are characterized by extremely rapid handling times compared to the competition. Robots, as the core of automated solutions, offer the advantage of being easily convertible and have a high level of flexibility for the integration of variants and / or new processes. In doing so, ruhlamat integrates all popular robot applications from different manufacturers, depending on the requirements of the customer, or assimilates existing robotics expertise into your production and/or assembly. The application range is endless! Whether as a pure handling device (e.g. extraction cells from injection moulding machines, pick and place) or as the centrepiece of hybrid assembly cells (i.e. work content split between operator and robot): simple convertibility and operational flexibility guarantee the highest possible investment security with high operational...

Mobile, compact and multifunctional. Whether as manual spraying equipment or on a fully automatic spraying system, the compact supply tank with its 45 litre stainless steel tank is suitable for all tasks. Equipped as standard with a pneumatic lifting device, handling is particularly easy. By using proven components, the sprayer is perfectly suited for long-term use. The device is suitable for spraying lubricants or coatings with a high solid content. To change the container or clean it, the complete container cover with all attachments is lifted pneumatically.

Mobile, compact and multifunctional. Whether as manual spraying equipment or on a fully automatic robot spraying system, the compact supply tank with its 45 litre stainless steel tank is suitable for all tasks. Equipped as standard with a pneumatic lifting device, handling is particularly easy. By using proven components, the sprayer is perfectly suited for continuous operation. The device is suitable for spraying lubricants or coatings with a high solid content. To change the tank or clean it, the complete tank cover with all attachments is lifted pneumatically.