High temperature bearings - Import export

iglidur® H2: Cost-effective high-temperature bearing up to 200°C Media resistant Low-Cost material. For application with high temperature requirements. Can be conditionally used in dry operation; excellent properties with additional lubrication. iglidur® H2 is available as cylindrical bearings and plain bearings with flange. Usable underwater Low-priced Chemical resistant For high temperatures

xiros® A500 heat Plastic ball bearings for high temperatures up to +150°C Product range xiros® A500 chemistry Plastic ball bearings with high resistance against chemicals. Product range xiros® A500 economical alternative Plastic ball bearings as an economical alternative. Product range xiros® A500 wear resistant Plastic ball bearing with wear resistance improved by factor 3. Product range Cage: PEEK PA Balls ES = stainless steel GL = glas PAI = Polymer xiros® A500 heat Plastic ball bearings for high temperatures up to +150°C Product range xiros® A500 chemistry Plastic ball bearings with high resistance against chemicals. Product range xiros® A500 economical alternative Plastic ball bearings as an economical alternative. Product range xiros® A500 wear resistant Plastic ball bearing with wear resistance improved by factor 3. Product range

iglidur® A350: temperature-resistant FDA-complied and wear-resistant at high temperatures A very universal bearing for applications in the food and pharmaceutical industries. Composition of FDA-conform materials allows the use in the areas where due to the contact with food other bearings cannot be used. With good tribologican and mechanical proberties, iglidur® A350 bearings are real allround talents for food machinery. iglidur® A350 is available as cylindrical bearings and plain bearings with flange. comply with the requirements of the FDA for application up to +180°C For medium till high loads well-suited for rotations and oscillating applications

Grease lubrication of plain and rolling bearings in high-temperature range, where a mineral oil based grease cannot be used, e.g. on hot-air blowers and fans, autoclaves, drying ovens or systems in steelworks and foundries Advantages and benefits Drip-free hot bearing grease for a broad temperature range with high oxidations stability and moisture resistance Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum high-performance formula Broad range of uses outside normal grease performance areas

In 2015 the product name was changed. The old product name was Castrol Viscotemp 2. Fully synthetic high-temperature lubricating grease Description Castrol Molub-Alloy 100-2 HT (previous product name Castrol Viscotemp 2) is a fully synthetic high-temperature lubricating grease for use at high continuous temperatures. It enables long-term lubrication of plain and rolling bearings and other grease lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines that are exposed to chemical influences, as well as in cold or influence of hot water and steam. Instructions for use Temperature range: -20 °C to +220 °C

In 2015 the product name was changed. The old product name was Castrol Viscotemp 2. Fully synthetic high-temperature lubricating grease Description Castrol Molub-Alloy 100-2 HT (previous product name Castrol Viscotemp 2) is a fully synthetic high-temperature lubricating grease for use at high continuous temperatures. It enables long-term lubrication of plain and rolling bearings and other grease lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines that are exposed to chemical influences, as well as in cold or influence of hot water and steam. Instructions for use Temperature range: -20 °C to +220 °C

Grease lubrication of plain and rolling bearings at high temperatures and high loads, e.g. on hot-air fans, converters, pouring ladles, sintering systems, conveyor systems subject to heat etc. Advantages and benefits Excellently suited for reducing friction and wear, protection against corrosion and impurities Maintenance of lubricating effect even at high temperatures and loads Highly effective due to selected combination of active ingredients for good corrosion protection properties, good resistance to ageing and excellent EP properties

Grease lubrication of plain and rolling bearings at high temperatures, e.g. in painting and drying ovens, converters, pouring ladles, heating systems, hot-air fans, charging cranes, vulcanising systems and electric motors Advantages and benefits Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum solid lubricant formula Broad range of uses above normal grease performance areas Reduced maintenance and lubricant costs due to possible safety lubrication Drip-free hot bearing grease for long-term and safety lubrication in a broad temperature range For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease.

Rolling and friction bearing lubrication, even at high temperatures Lubrication for bearings with contact to cleaning agents or disinfectants For mechanical units such as levers, joints and hinges, also under strong water effect Advantages and benefits NSF H1 registered (OKS 480 & OKS 481) High shear stability prevents thinning out of the grease under extreme mechanical loads such as during vibrations Excellent wear protection and very good high-pressure properties The calcium sulphonate complex soap ensures excellent water resistance and very good corrosion protection Broad temperature application range (-30°C to +160°C) High temperature and oxidation stability through fully synthetic base oil Very high resistance to water-alkaline or acidic disinfectants and cleaning agents MOSH/MOAH-free

Rolling and friction bearing lubrication, even at high temperatures Lubrication for bearings with contact to cleaning agents or disinfectants For mechanical units such as levers, joints and hinges, also under strong water effect Advantages and benefits NSF H1 registered High shear stability prevents thinning out of the grease under extreme mechanical loads such as during vibrations Excellent wear protection and very good high-pressure properties The calcium sulphonate complex soap ensures excellent water resistance and very good corrosion protection Broad temperature application range (-30°C to +160°C) High temperature and oxidation stability through fully synthetic base oil Very high resistance to water-alkaline or acidic disinfectants and cleaning agents Also available as spray version OKS 481 MOSH/MOAH-free

Silicon Nitride Ceramic Balls are widely used on bearings with extreme performance requirements, such as: High-speed bearings, high precision bearings, vacuum bearing, high / low-temperature bearing, non-magnetic bearing, high precision ball screw; it is also used as valve ball, measuring ball for the chemical pump, heat pumps, metering pumps. Its excellent properties including: Good corrosion resistance withstands attacks from harsh chemicals and environments. High-Temperature Hardness is twice that of steel, Silicon nitride ceramic balls retain their strength and hardness up to 1800 degrees F.Lightweight, silicon nitride ceramic balls’ density is 3.20g/cm3 and weighs 45% less than steel which reduces centrifugal force, skidding and wear under high speed and acceleration, so greatly extending the service life. Superior Surface Finish is conducive to improving working speed and reach higher accuracy.

Silicon Nitride Ceramic Ball is made of the hot isostatic pressing and sintering furnace and has the properties including high strength,high wear resistance,high temperature,corrosion,acid and alkali resistant,long-term using in the sea,good electrical insulating ect. The precision Si3N4 Ceramic Ball of Innnovacera produce is widely used in a a variety of high-precision, high-speed / ultra-high-speed bearings, vacuumbearing, high / low temperature bearing, non-magnetic bearing.It is also as the measurement ball used in chemical valve,high temperature valve,meter valve ect.The field of the application involve chemical, metallurgical, medical, food, oil, electronics,aerospace,ect. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

Grease HT 300 is a grease based on bentone, suitable for use at very high temperatures with peaks up to 250°C. Due to the unique additive package, this grease is remarkably resistant to high pressure, which offers protection under heavy loads. Benefits For use on all machines (except fast-moving bearings) under high temperatures (with peaks up to 250°C), such as in drying furnaces and ovens, transport chain rollers, … Excellent adhesive properties. Not soluble in water.

Equipment operating under high temperature and load conditions. Bearings and gears operating in a warm, moist environment. Wet- and dry-end sections of papermaking machines. Advised when loaded gears form part of the lubrication circuit.

Axles - Type 411/412 Axles - TYPE 811/812 Axles - TYPE 813 AXLES TYPE 41: MOUNTING 411 OR 412 FOR MOUNTING ON BEARERS INSIDE THE WHEELS Mounting 411: ball bearings Mounting 412: taper roller bearings These axles on square body can be fitted with high-temperature bearings, according to defined load. The loads must be uniformly distributed. Higher tonnages must be considered at the design stage according to the rail and use outside the private siding area. The dimensions and the force are given for the reference track of the table above. These axles can be produced for a different gauge on request. AXLES TYPE 81: MOUNTING 811 AND 812 FOR MOUNTING ON BEARERS OUTSIDE THE WHEELS - Chassis fastening on external bearers - axle body round - wheels mounted on bearings - low speed. The loads must be uniformly distributed. Higher tonnages must be considered at the design stage according to the rail and use outside the private siding area. The dimensions and the force are given for the...

FULL OPTIONAL high quality fusing machine for clothing, outerwear, shirts and the automotive sector. The machine is available with a belt width of 1000-1200-1400-1600mm. It has a working area of 1400mm long, which allows several operators to load the pieces to be thermoadhesive. Such area consists of a work surface and a belt section that easily receives the pieces to be loaded into the machine. The transport system consists of a lower belt and an upper belt, made of fiberglass with antistatic treatment, teflon-coated without joints. Compensating rollers guide the belt, excluding the formation of folds and corrugations. The 1150mm long heating surface is composed of a series of 8 laminated profiles that form curved panels. Built with top quality materials, belt guide system with FESTO pneumatics, high temperature bearings, energy saving system and ECO heating system with solid state relays and “smart” thermostats. The pressure system can be single or double.

Introducing the MVHHT Series: High-temperature filters built to withstand the heat. Crafted with micro glass fiber media and separator, available in stainless steel or galvanized steel frames. Resilient up to 250 degrees, these filters are essential for air conditioning systems and industrial processes. "

High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and solid parts or structural elements that can be used at temperatures up to 1.400 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% biosoluble — high temperature resistance — low thermal conductivity — high chemical resistance * — low weight — good tear resistance — high flexibility — easy processing — complicated geometries can be produced — recyclable * to achieve higher acid resistance, a special coating is required. Available from manufacturer. Application: Burner plant components, crucibles, thermocouple housings, coupling devices in continuous casting plants, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals, gasket in aluminium foundries, gaskets in blast furnaces, expansion joints, pipe insulation, catalyst insulation, repair work in the high temperature range.

High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and strong parts or structural elements that can be used at temperatures up to 1 .600 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% natural — biosoluble — high thermal shock resistance — low thermal conductivity — high chemical resistance * — recyclable — low weight — good tear resistance — high flexibility — easy processing — harmless to health — complicated geometries can be produced * A special coating is required to achieve high acid resistance. Available from manufacturer. Fields of application: gaskets, crucibles, thermocouple housings, coupling devices in continuous casting plants, expansion joints, convex and flat gaskets in blast furnaces, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals.