Hollow shafts - Import export

Resolution max. 5000 pulses/revolution. Through hollow shaft up to max. ø15 mm. Robust bearing construction. -40 °C … +85 °C operating temperature. High shock and vibration resistance

We manufacture rough or fully machined hollow shaft for mixer : WNr 1.4536 GX2NiCrMoCu25-20 Above: as cast tube before rough machining operation.

• Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Proven capacitive scanning system • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Measuring range (zero point and end position) and sense of rotation via Modbus/TCP adjusted

Converts the angular position of a shaft into a load independent direct current signal, proportional to the angular shaft position. • Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Proven capacitive scanning system • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Measuring range, sense of rotation, zero position and linear/V-characteristic can be adjusted by a switch and two push-buttons • Analog output signal 4…20 mA, 2-wire connection • Zero position and end position are independently adjustable • Capacitive scanning system provides absolute position immediately after activation • Suitable for ocean-going vessels acc. GL

The range of incremental encoders fit to be coupled to motor shafts includes different mechanical types: the series RE400, with flange diameter 53.5 mm and RE470, with flange diameter 72 mm, provide a coupling joint, while the series RE410 and RE450 avail on a hollow shaft. Different measures are available for the joint hole and for the shaft diameter. All the types are housed in a metal case. The connection type and position can be chosen among different options, as well as the output signal formats. The pulses per revolution number ranges from 2 to 12500. The zero reference pulse option is available for all the series (type RE401/RE411/RE451/RE471)

PD / PM series parallel shaft mounted gear units produced with hollow shaft or solid shaft are commonly preferred in conveyor drive systems.

Helical and worm gear units with 90° input and output axis range. Casing with feet, flange F options Rigid case structure and suitable for heat transfer. System resistance calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options may be provided (Coupled motor, IEC, PAM, W, Servo motor connected, ...). Different output options available (Solid shaft, Hollow shaft, With shrink disc, ...).

Helical bevel gear units with 90° input and output axis range. Casing with feet, flange F options. A rigid structure in case. System resistance calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options may be provided (Coupled motor, IEC, PAM, W, Servo motor connected, ...). Different output options available (Solid shaft, Hollow shaft, With shrink disc, ...).

IKO Linear Bushing G is a high load capacity type linear motion rolling guide in which the external cylinder performs endless linear motion on a shaft with grooved raceway. It is a linear bushing with large load capacity despite being simple and very compact. Since the external cylinder and shaft with grooved raceway dimensions are individually managed, each can be freely added and exchanged. Click here for details on the interchangeable type High Load Capacity The structure in which balls in two rows have contact with the track groove of the shaft allows greater rigidity and larger load capacity. Solid Shaft and Hollow Shaft There are two types of shafts with grooved raceway solid shaft LMG and hollow shaft LMGT. The hollow shaft is useful for piping, wiring, air removal, etc. Dimensionally Compatible with Linear Bushings Dimensionally compatible with the Linear Bushing LM Series to allow easy replacement.

Interchange specifications are available. Since the external cylinder and spline shaft dimensions are separate, each can be individually added or exchanged. Two external cylinder shapes are available standard (cylindrical) and flange. External Cylinder Length Both the standard type and flange type offer two external cylinder length options, standard and highrigidity long. They can be used for a wide range of applications offering greater design flexibility. Solid Shaft and Hollow Shaft The spline shaft is available in either a solid shaft or hollow shaft, which can be selected according to the application. Stainless Steel A stainless steel spline shaft can be selected as an option. They are best suited for applications where rust prevention oil cannot be used, such as in a cleanroom environment.

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and ring gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / ring gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible. Saves time and money. Cooperation with companies for special cases. We are looking forward hearing from you.

The AH36M rotary encoder with teach-in function is a magnetic absolute value encoder with analog output. The user himself can set the rotary encoder's desired measurement range via two external inputs. The device features a batteryless multi-turn technology. Absolute analog encoder. 12 Bit (4096) resoluttion over the measuring range. Operating tmperature until -40 °C. Voltage (0 … 10 V)/ current (4 … 20 mA) outputs. Programmable measuring range via teach-in function with external inputs. Hollow shaft with ø6 mm.

High resolution, magnetic scanning, sturdy plastic housing in especially flat design - for applications with restricted space conditions, e.g., in drive technology or medical technology. Installation depth 25 mm. Resolutions of max. 2000 pulses/revolution. Through hollow shafts up to max. ø14 mm with plain or ball bearing. IP50 protection category (plain bearing), IP63 (ball bearing). Housing made of reinforced plastic.

Through hollow shaft Ø 14 mm. Adaptation to various measurement distances owing to a wide range of gear ratios. Compact, low-cost design. Potentiometer or power output. Easy mounting.

And fine reading. Through hollow shafts up to ø20 mm. Adaptation to various measurement distances owing to a wide range of gear ratios. Integrated slip clutch to protect the potentiometer. Compact design. Potentiometer, power or voltage output. IP68 protection category with oil filling possible. Easy mounting.

Resolution max. 5000 pulses/revolution. Through hollow shaft up to max. ø28 mm. M12 or cable connection

The IG06 incremental encoder features a low-cost design with through hollow shaft and can be mounted easily. Resolutions of max. 1024 pulses/revolution. Through hollow shafts up to ø20 mm. Housing made of impact-resistant plastic. Low-cost version.

Sturdy plastic housing with through hollow shaft Profile IG06: Resolutions of max. 1024 pulses/revolution Through hollow shafts up to ø20 mm Housing made of impact-resistant plastic Low-cost version

Aluminum housing with through hollow shaft Profile IH58M: Resolutions of max. 2560 pulses/revolution Hollow shafts up to Ø 22 mm, stainless steel IP65 protection category Housing made of aluminum Condensation permitted with sealed electronics unit

Compact design with through hollow shaft Profile GP02: Through hollow shaft Ø 14 mm Adaptation to various measurement distances owing to a wide range of gear ratios Compact, low-cost design Potentiometer or power output Easy mounting

Flat design with through hollow shaft Profile IG09M: Resolutions of max. 2560 pulses/revolution Through hollow shafts up to ø20 mm IP53 and IP63 protection categories Housing made of reinforced plastic Condensation permitted with sealed electronics unit Can be combined with the DA09S position indicator

Housing made of zinc die-cast with through hollow shaft Profile IG07: Resolutions of max. 1024 pulses/revolution Through hollow shafts up to ø20 mm Housing made of zinc die-cast High shaft load rating, radial 5600 N, axial 1400 N

Non-contacting NOVOHALL Multiturn Rotary Sensor in 36,5 mm all-metal housing. Analog and digital interfaces. Different versions in solid or hollow shafts and heavy-duty.

Non-contacting NOVOHALL Singleturn Rotary Sensor in 36,5 mm all-metal housing. Analog and digital interfaces. Different versions in solid or hollow shafts and heavy-duty.

Analog Profile AG02 Analog: Easy mounting Optional through hollow shafts up to max. Ø 14 mm Integrated analog absolute position encoder

Metal housing with hollow shaft Profile AH36M: Absolute analog encoder 12 Bit (4096) resoluttion over the measuring range Operating tmperature until -40 °C Voltage (0 … 10 V)/ current (4 … 20 mA) outputs Programmable measuring range via teach-in function with external inputs Hollow shaft with ø6 mm

Flat design with through hollow shaft Profile IG04M: Installation depth 25 mm Resolutions of max. 2000 pulses/revolution Through hollow shafts up to max. ø14 mm with plain or ball bearing IP50 protection category (plain bearing), IP63 (ball bearing) Housing made of reinforced plastic

Version with two counters (4 or 5 decades) and fine reading. Predestined for use with wood milling machines. Hollow shaft, max. Ø 30 mm. Display can be designed for “mm” or “inch”.

Sturdy and powerful actuator for simple positioning jobs Easy mounting. Through hollow shafts up to max. ø14 mm. Integrated magnetic position encoder on output shaft. Integrated motor control (option).