Control - Import export

Description: The LMR36520ADDAR is a SIMPLE SWITCHER® DC DC switching controller from Texas Instruments. It is designed to provide a regulated output voltage of 1V with a maximum current output of 2A. It has a wide input voltage range of 4.2V to 28V and is capable of synchronous rectification

The LTC3862IGN#TRPBF is a linear DC-DC switching controller from Analog Devices. It is designed to provide a high-efficiency, low-noise, and low-EMI solution for a wide range of DC-DC conversion applications. It features a wide input voltage range of 4.5V to 28V, a wide output voltage range of 0.8V to 40V, and a maximum output current of 6A. The device also features a high-frequency switching frequency of 75kHz to 500kHz, a duty cycle of up to 0.96, and a synchronous rectifier for improved efficiency. The LTC3862IGN#TRPBF is available in a 24-SSOP package and is supplied in tape and reel (TR) alternate packaging. It is suitable for use in a variety of applications, including automotive, industrial, and consumer electronics

The LM393DR2G is an 8-pin SOIC general purpose comparator with a maximum operating temperature of +70°C. It has a quiescent current of 2.5mA and an input bias current of 250nA. Features:-General purpose comparator -8-pin SOIC package -Maximum operating temperature of +70°C -Quiescent current of 2.5mA -Input bias current of 250nA -Packaged in Digi-ReelR Alternate Packaging Applications: The LM393DR2G is suitable for a wide range of applications, including voltage monitoring, temperature sensing, and signal conditioning. It can also be used in motor control, power supplies, and other industrial applications.

The Microchip Technology Inc. 24CXX, 24LCXX, 24AAXX and 24FCXX (24XX*) devices are a family of 128-bit through 512 Kbit Electrically Erased PROMs. The devices are organized in blocks of x8-bit memory with 2-wire serial interfaces. Low-voltage design permits operation down to 1.7V (for 24AAXX devices), with standby and active currents of only 1 μA and 1 mA, respectively. Devices 1 Kbit and larger have page write capability. Parts having functional address lines allow connection of up to 8 devices on the same bus. The 24XX family is available in the standard 8-pin PDIP, surface mount SOIC, TSSOP and MSOP pack ages. Most 128-bit through 16 Kbit devices are also available in the 5-lead SOT-23 package. DFN packages (2x3mm or 5x6mm) are also available. All packages are Pb-free (Matte Tin) finish. Features: • 128-bit through 512 Kbit devices • Single supply with operation down to 1.7V for 24AAXX devices • Low-power CMOS

The Microchip Network Interface Card (NIC) ENC28J60T-I/SS is a 10 Mbps Ethernet controller with an integrated PHY and MAC. It is designed to provide a low-cost, low-power solution for connecting microcontrollers to Ethernet networks. The ENC28J60T-I/SS is available in a 28-pin SSOP package and is compatible with the industry-standard 10 Base-T protocol. It supports full-duplex and half-duplex operation and has a maximum current consumption of 160mA. The ENC28J60T-I/SS is suitable for a wide range of applications, including industrial automation, home automation, building automation, and medical device networking. It is also suitable for use in embedded systems, such as those used in consumer electronics, automotive, and IoT applications.

Description: The XC7A200T-1FBG484C is a Xilinx Integrated Circuits (ICs) FPGAs (Field Programmable Gate Array) based on the Artix-7 series. It has a total of 215360 logic elements/cells, 13455360 bits of RAM, 16825 LABs/CLBs, and 285 I/O. It is designed for surface mount applications and has an operating temperature range of 0°C to 85°C (TJ). It is packaged in a 484-FCBGA (23x23) and 484-BBGA, FCBGA package and requires a voltage supply of 0.95 V to 1.05 V.

The Microchip PIC16F627A-I/ML is a 28-VQFN Exposed Pad SMD/SMT microcontroller with a PIC core processor, FLASH program memory, and SRAM data RAM type. It operates on a supply voltage of 3 V to 5.5 V and has a maximum operating temperature of + 85 C. Features: -PIC core processor -FLASH program memory -SRAM data RAM type -Supply voltage of 3 V to 5.5 V -28-VQFN Exposed Pad SMD/SMT package -Maximum operating temperature of + 85 C -Operating temperature range of - 40 C to + 85 C Applications: The Microchip PIC16F627A-I/ML microcontroller is suitable for a wide range of applications, including automotive, industrial, medical, and consumer electronics. It can be used for motor control, data acquisition, and signal processing.

The LM5050MK-1/NOPB from Texas Instruments is a N+1 ORing Controller in a Digi-ReelR Alternate Packaging package. This controller features internal switches, a 130 μA operating supply current, a logic level input control, a -40 °C to 125 °C operating temperature range and a 0.001270 oz unit weight. Features: • Internal switches • Operating Supply Current: 130 µA • Logic Level Input Control • Operating Temperature Range: -40 °C to 125 °C • Unit Weight: 0.001270 oz • Packaging: Digi-ReelR Alternate Packaging • Product Category: Controllers & Switches • Type: N+1 ORing Controller • Mounting Style: SMD/SMT Applications: The LM5050MK-1/NOPB controllers are ideal for use in applications such as power supplies, computing, and telecommunications. Additionally, these controllers are suitable for use in data centers, distributed power systems, and anywhere high-reliability power distribution is required.

The TI ADS7042IDCUR is an analog-to-digital converter (ADC) that converts analog signals into 12-bit digital signals. It has a maximum sampling rate of 1MSPS (million samples per second) and is housed in an 8-pin US8 package. Features: • 12-bit resolution • Maximum sampling rate of 1MSPS • 8-pin US8 package • Low power consumption • Low noise • High accuracy • Wide input voltage range • Low offset and gain errors • Programmable gain • Internal reference Applications: The TI ADS7042IDCUR is suitable for a wide range of applications, including medical imaging, industrial process control, automotive, and consumer electronics. It can be used for data acquisition, signal conditioning, and control systems.

The Microchip AT89C51CC01UA-RLTUM is a powerful 8-bit microcontroller with a 32KB Flash memory and 40MHz CAN bus. It is designed for applications requiring high performance and low power consumption. The AT89C51CC01UA-RLTUM features a wide operating temperature range of -40°C to 85°C (TA) and is housed in a 44-VQFP (10x10) package. It is ideal for embedded applications such as industrial automation, automotive, medical, and consumer electronics. The AT89C51CC01UA-RLTUM offers a wide range of features including an 8-bit CPU, 32KB Flash memory, 40MHz CAN bus, and a wide operating temperature range. It also includes a variety of peripherals such as an 8-channel 10-bit A/D converter, two 16-bit timers/counters, a watchdog timer, and an interrupt controller. The AT89C51CC01UA-RLTUM is a highly integrated, low-power, and cost-effective solution for embedded applications.

The Freescale MC56F8366VFVE is a high-performance, low-power, 32-bit digital signal controller (DSC) with integrated Flash memory. It is designed for applications requiring high-speed control and signal processing. It features a 50 MHz core, 256 KB Flash memory, 16 KB RAM, and 62 I/O pins. It is suitable for a wide range of applications, including motor control, power conversion, industrial automation, and consumer electronics. It is available in a 144-LQFP package and operates over a temperature range of -40°C to 105°C (TA)

This family offers the advantages of all PIC18 microcontrollers – namely, high computational performance at an economical price – with the addition of highendurance, Enhanced Flash program memory. On top of these features, the PIC18F8722 family introduces design enhancements that make these microcontrollers a logical choice for many high-performance, power sensitive applications. Features • Run: CPU On, Peripherals On • Idle: CPU Off, Peripherals On • Sleep: CPU Off, Peripherals Off • Ultra Low 50 nA Input Leakage • Run mode Currents Down to 25 μA Typical • Idle mode Currents Down to 6.8 μA Typical • Sleep mode Current Down to 120 nA Typical • Timer1 Oscillator: 900 nA, 32 kHz, 2V • Watchdog Timer: 1.6 μA, 2V Typical • Two-Speed Oscillator Start-up

The Microchip Technology Network Interface Card (NIC) ENC424j600-I/PT is a low-cost, high-performance Ethernet controller that provides a complete 10/100 Base-T physical layer (PHY) solution. It is designed to provide a simple, cost-effective solution for embedded Ethernet applications. Features: • 10/100 Base-T PHY • Integrated MAC and PHY • Supports both SPI and parallel interfaces • Low power consumption • -40°C to 85°C operating temperature range • 44-TQFP (10x10) package • Alternate packaging available in tray Applications: The Microchip Technology Network Interface Card (NIC) ENC424j600-I/PT is ideal for a wide range of embedded Ethernet applications, including industrial automation, medical equipment, consumer electronics, and automotive. It is also suitable for applications that require low power consumption and a wide operating temperature range.

The Intersil ISL317XE are ±15kV IEC61000 ESD Protected, 3.3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. These devices have very low bus currents (+125μA/-100μA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without violating the RS-485 specification’s 32 unit load maximum, and without using repeaters. For example, in a remote utility meter reading system, individual meter readings are routed to a concentrator via an RS-485 network, so the high allowed node count minimizes the number of repeaters required.

The HD64F3664HV is a 16-bit microcontroller from Renesas. It is based on the H8/300H architecture and is designed for embedded applications. It features 32KB of Flash memory, a 16MHz clock speed, and a 64-QFP package. It is rated for operation from -20°C to 75°C (TA).

The ZETEX BSP75GTA is a N-Channel INTELLIFET® SOT-223 General Purpose Power Distribution Switch and Load Driver with a maximum voltage of 60V. It features a 1.6A Auto Restart and an operating temperature range of -40°C to 150°C (TJ).

A membrane switch is an electrical switch for turning a circuit on and off. It differs from a mechanical switch. Membrane switch is very thin and soft. The touch surface material usually is PET or PC. The circuit can be PET, FPC or even PCB. Membrane switches are user-equipment interface utilities that allow for the communication of commands from users to electronic devices. Teingesch mainly provides membrane switches, capacitive switches, membrane keypads, rubber keypad switches, PCB/FPC membrane switches, graphic overlays, waterproof membrane switches, UV-resistant membrane switches, touch display modules etc. to the customers from all of the world. We also can provide PCBA design, SMT service, Single-chip development and contract manufacturing services for all our customers.

We can help you to supervise the loading of your order to shipping container to ensure: 1. quantity and assortment are correct. 2. container is in good condition. 3. proper loading. 4. condition of export cartons are good. 5. client special requirements are observed.

Our own laboratory can perform the following test: 1. Accelerated Weathering Test . 2. Environmental Temperature and Humidity Test. 3. Corrosion Resistance Test. 4. Transportation Test. 5. Color Assessment. 6. Precision Dimensional Measurement. 7. Metal Hardness Verification.

We can help you to identify quality risks before manufacturing start. We verify your factory / supplier is able to start the production on schedule and all your products specifications and quality requirements are understood.

We are able to help you to do verification as per the following: 1. If the factory is legitimate. 2. If the factory has experience in similar products. 3. If the factory knows the requirement. 4. If the factory has the capability to make the product. If the facility has the capacity to produce the required quantity within the scheduled time. You will need to let us know what do you want to verify with the factory.