Electronic%20components - Import export

The UTC OPA2336 is a CMOS operational amplifier. It is operated on a 2.1V (Min.) single supply. A100kΩ load is driven by the rail-to-rail output and the accuracy of the output voltage is ensured at ± 3mV. The UTC OPA2336 is characterized by its low quiescent current (20μA/amplifier), low offset voltage (125μV max), low input bias current (1pA), and high open-loop gain (115dB).

Maxim Integrated Real Time Clocks DS1248Y-70+ is a 32-DIP module with a through-hole mounting style. Its key features include an operating temperature range of 0°C to 70°C, a parallel interface, and time/date formats like YY-MM-DD-dd and HH:MM:SS:hh (12/24 hr). This RTC is part of Maxim Integrated's DS1248 family of low-power real-time clocks that provide reliable and highly accurate time-keeping for improved data integrity and system reliability. It can be used in applications such as general and industrial measurements, RF communications, automotive, medical monitoring, and other embedded system time synchronization applications. Its compact form factor and low power consumption make it a great choice for your timekeeping needs. The DS1248Y-70+ is packaged in tubes for convenient handling and storage.

The TPS7A8500ARGRT is a linear voltage regulator IC from Texas Instruments. It is a positive adjustable/programmable regulator with one output and a maximum current of 4A. It is packaged in a 20-VQFN (3.5x3.5) package.

The LM5017SD/NOPB is a synchronous buck regulator from Texas Instruments. It is a high-efficiency, low-noise, adjustable switching regulator that can deliver up to 0.6A of output current. It is designed to operate from a wide input voltage range of 4.5V to 36V and can be used to generate output voltages as low as 0.8V. The LM5017SD/NOPB is housed in an 8-pin WSON package and is ideal for applications such as point-of-load regulation, battery charging, and LED lighting.

The Microchip Network Interface Card (NIC) ENC28J60T-I/SS is a 10 Mbps Ethernet controller with an integrated PHY and MAC. It is designed to provide a low-cost, low-power solution for connecting microcontrollers to Ethernet networks. The ENC28J60T-I/SS is available in a 28-pin SSOP package and is compatible with the industry-standard 10 Base-T protocol. It supports full-duplex and half-duplex operation and has a maximum current consumption of 160mA. The ENC28J60T-I/SS is suitable for a wide range of applications, including industrial automation, home automation, building automation, and medical device networking. It is also suitable for use in embedded systems, such as those used in consumer electronics, automotive, and IoT applications.

The DG409DYZ is an integrated circuit (IC) analog switch, multiplexer, and demultiplexer from Intersil. It is a two-channel device with a maximum on-resistance of 100 ohms and a maximum off-time of 120 ns. It is designed for surface mount technology (SMT) and has a maximum operating temperature of +85°C. The supply voltage range is 5V and the unit weight is 0.005069 oz. It is packaged in a tube. Features: • Maximum on-resistance of 100 ohms • Maximum off-time of 120 ns • Maximum operating temperature of +85°C • Supply voltage range of 5V • Unit weight of 0.005069 oz • Packaged in a tube • Maximum on-time of 180 ns Applications: The DG409DYZ IC is suitable for a variety of applications, including signal routing, signal switching, and signal multiplexing. It can be used in a variety of consumer electronics, automotive, and industrial applications.

Photoelectric Counter Various Kinds Of Readers Position Detection

The Freescale / NXP MC9S08SH8CSC is an 8-bit microcontroller with 8KB of Flash memory. It is designed for use in a wide range of applications, from automotive to consumer electronics. The MCU is capable of operating at speeds up to 40MHz and is housed in an 8-SOIC package. It is also rated for operation over a temperature range of -40°C to 85°C (TA). The MC9S08SH8CSC features a wide range of peripherals, including a 10-bit ADC, SPI, I2C, UART, and a variety of timers. It also has a low-power sleep mode, allowing it to conserve power when not in use. The MCU is also compatible with a variety of development tools, including CodeWarrior and IAR Embedded Workbench. The Freescale / NXP MC9S08SH8CSC is an ideal choice for applications requiring a low-power, high-performance 8-bit microcontroller. It is well-suited for a variety of applications

The 74HC175PW,118 NXP Semiconductors Integrated Circuits (ICs) Flip-Flop is a D-Type flip-flop with a voltage-supply of 2 V ~ 6 V and an operating-temperature of -40°C ~ 125°C (TA). It has a single element and a current-output-high-low of 5.2mA, 5.2mA. It is packaged in a Tape & Reel (TR) Alternate Packaging and has a frequency-clock of 89MHz. It has a surface mount mounting-type and a max-propagation-delay-v-max-cl of 30ns @ 6V, 50pFFeatures: • Voltage-supply of 2 V ~ 6 V • Operating-temperature of -40°C ~ 125°C (TA) • Single element • Current-output-high-low of 5.2mA, 5.2mA • Packaged in a Tape & Reel (TR) Alternate Packaging • Frequency-clock of 89MHz • Surface mount mounting-type • Max-propagation-delay-v-max-cl of 30ns @ 6V, 50pF Applications: • Automotive • Industrial • Consumer • Medical • Telecommunications

The ON Semiconductor MC74VHC1G08DFT2G is a single 2-input AND gate in a SC-70 package. It is a high-speed CMOS logic device that operates from a single 5.5 V supply. The device features low power consumption and high noise immunity. Features: • Low power consumption • High noise immunity • Single 5.5 V supply • High-speed CMOS logic • Surface mount • Operating temperature range: -55°C to 125°C • Package: SC-70 • Alternate Packaging: Digi-ReelR • Input leakage current: 1μA Applications: The MC74VHC1G08DFT2G is suitable for a wide range of applications, including logic gates, logic buffers, and logic inverters. It is also suitable for use in automotive, industrial, and consumer applications.

The Infineon BTN8982TAAUMA1 is a full and half-bridge driver IC designed for motor control applications. It is a high-performance, low-cost, and low-power solution for driving brushless DC (BLDC) motors. The device features a wide operating voltage range of 4.5V to 36V, a wide operating temperature range of -40°C to +125°C, and a low quiescent current of only 1.5mA. The device also features a wide range of protection features, including over-temperature protection, over-current protection, and short-circuit protection

The ADAU1781 is a low power, 24-bit stereo audio codec. The low noise DAC and ADC support sample rates from 8 kHz to 96 kHz. Low current draw and power saving modes make the ADAU1781 ideal for battery-powered audio applications.

The LTC1594LCS#PBF is a microPOWER™ MUX-S/H-ADC from Linear Technology Integrated Circuits (ICs) Analog to Digital Converters (ADC). It has an operating temperature range of 0°C to 70°C and a data interface of SPI. It has an external reference type, a SAR architecture, a 5V voltage supply digital, 4 inputs, a single ended input type, and a 12-bit resolution.

The TI Instrumentation Amplifier OPA170AIDBVR is a single-channel, low-power, low-noise amplifier with a high common-mode rejection ratio (CMRR) of 90 dB. It has a maximum supply voltage of 36 V and a minimum supply voltage of 2.7 V. The input bias current is 15 pA and the input offset voltage is 1.8 mV. It is packaged in a reel and has a unit weight of 0.001058 oz

The KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable. Features • Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver • RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths • RGMII with 3.3V/2.5V/1.8V tolerant I/Os • Auto-negotiation to automatically select the highest link up speed (10/100/1000Mbps) and duplex (half/full) • On-chip termination resistors for the differential pairs • On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core • Jumbo frame support up to 16KB • 125MHz reference clock output

The AP2139AK-3.3TRG1 is a positive fixed linear voltage regulator with a single regulator and a voltage output of 3.3V. It has a maximum input voltage of 6.6V and a typical voltage dropout of 0.4V at 250mA. It is packaged in a SC-74A, SOT-753 and has an operating temperature range of -40°C to 85°C. Features: • Positive fixed linear voltage regulator • Single regulator • Voltage output of 3.3V • Maximum input voltage of 6.6V • Typical voltage dropout of 0.4V at 250mA • Packaged in a SC-74A, SOT-753 • Operating temperature range of -40°C to 85°C Applications: • Power supplies • Battery-powered devices • Automotive electronics • Industrial electronics • Telecommunications equipment

The Qualcomm Interface AR8031-AL1B is a surface mount Ethernet transceiver designed for use in a wide range of applications. It is capable of operating over a temperature range of -40°C to 85°C and is powered by a 3.3V supply. The AR8031-AL1B is compliant with the IEEE 802.3 standard and supports 10/100/1000 Mbps data rates. Features: • Compliant with IEEE 802.3 standard • Supports 10/100/1000 Mbps data rates • Low power consumption • Surface mount design • Operating temperature range of -40°C to 85°C • Powered by a 3.3V supply Applications: The Qualcomm Interface AR8031-AL1B is suitable for a wide range of applications, including: • Industrial automation • Automotive • Networking • Telecommunications • Medical • Consumer electronics

The LT3751EFE#PBF from Analog Devices / Linear Technology is a specialized power management IC designed for use in battery charging applications. This IC is capable of controlling and charging up to 20 cells in series, making it ideal for use in high-capacity battery packs. It features a wide input voltage range of 4.5V to 40V, allowing it to be used in a variety of applications. The LT3751EFE#PBF also features a wide operating temperature range of -40°C to +125°C, making it suitable for use in extreme environments. Additionally, it has a low quiescent current of only 1.5mA, making it highly efficient. The LT3751EFE#PBF is housed in a 20-pin TSSOP package, making it easy to integrate into existing designs. With its wide input voltage range, wide operating temperature range, and low quiescent current, the LT3751EFE#PBF is an ideal choice for battery charging applications.

The LX7175CLD is a synchronous buck switching regulator from Microsemi. It is a 3.5A adjustable regulator with a 10-pin DFN package. It is designed to provide a high efficiency, low noise, and low output voltage ripple solution for a wide range of applications. • 3.5A adjustable output current • 10-pin DFN package • Synchronous buck switching regulator • High efficiency • Low noise • Low output voltage ripple • Wide input voltage range (4.5V to 28V) • Output voltage range (0.8V to 5.5V) • Programmable switching frequency (200kHz to 2.2MHz) • Programmable soft-start • Over-temperature protection • Over-current protection • Short-circuit protection Applications: The LX7175CLD is suitable for a wide range of applications, including: • Automotive • Industrial • Computing • Networking • Telecom • Portable electronics • Battery-powered systems

Description: The LMR36520ADDAR is a SIMPLE SWITCHER® DC DC switching controller from Texas Instruments. It is designed to provide a regulated output voltage of 1V with a maximum current output of 2A. It has a wide input voltage range of 4.2V to 28V and is capable of synchronous rectification

The LTC2440CGN#PBF is a high-performance, low-power, 16-bit, sigma-delta analog-to-digital converter (ADC) with an SPI interface. It is designed to provide accurate, low-noise conversion of differential analog signals in a wide range of applications. The LTC2440CGN#PBF features a wide input range of 0°C to 70°C, a low power consumption of only 1.2 mW, and a fast conversion rate of up to 1.5 MSPS. It also offers a wide range of features, including a programmable gain amplifier, a programmable digital filter, and a programmable reference voltage. The LTC2440CGN#PBF is ideal for applications such as medical imaging, industrial process control, and automotive systems. It is available in a 16-SSOP package and is RoHS compliant.

The Microchip Linear Voltage Regulators MCP1812AT-033/OT are designed to provide a reliable and efficient power supply solution for a variety of applications. This device is a 0.6V @ 300mA over current positive SC-74A SOT-753 voltage regulator. It features a low dropout voltage, low quiescent current, and high power supply rejection ratio. The device also has a wide input voltage range of 2.7V to 6.5V and a wide output voltage range of 0.6V to 5.5V. It is also capable of providing up to 300mA of output current. The device is also designed to be highly efficient, with a typical efficiency of up to 95%. The device is also designed to be highly reliable, with a maximum junction temperature of 150°C. The device is also RoHS compliant and is available in a variety of packages. The Microchip Linear Voltage Regulators MCP1812AT-033/OT are an ideal solution for providing a reliable and efficient power supply solution for a variety of applications.

The MC68HC711E9CFN2 is a 8-bit microcontroller from Freescale Semiconductor. It is based on the HC11 architecture and is designed for embedded applications. It has an operating temperature range of -40°C to 85°C (TA) and features 12KB of OTP (12K x 8) memory. It has a maximum clock frequency of 2MHz and is packaged in a 52-PLCC (19.1x19.1) package. Features: • 8-bit microcontroller based on the HC11 architecture • Operating temperature range of -40°C to 85°C (TA) • 12KB of OTP (12K x 8) memory • Maximum clock frequency of 2MHz • Packaged in a 52-PLCC (19.1x19.1) packag Applications: • Automotive• Industrial • Consumer • Medical • Aerospace • Military

The XCR3128XL-10VQ100C is a Complex Programmable Logic Device (CPLD) from Xilinx. It is a 9.1ns surface mount device with a temperature range of 0°C to 70°C (TA). It is in-system programmable with a minimum of 1K program/erase cycles. It is packaged in a 100-VQFP (14x14) CoolRunner XPLA3 tray.Features: • 9.1ns access time • 0°C to 70°C (TA) temperature range • In-system programmable with a minimum of 1K program/erase cycles • 100-VQFP (14x14) CoolRunner XPLA3 tray Applications: The XCR3128XL-10VQ100C CPLD is suitable for a wide range of applications, including: • Automotive • Industrial• Medical • Networking • Telecommunications • Consumer electronics • Aerospace and defense

The TI Linear Voltage Regulators TLV70433DBVT are low dropout (LDO) regulators that provide a regulated output voltage of 3.3V with an input voltage range of up to 24V. The device features a 150mA output current, 2% voltage regulation accuracy, and an operating temperature range of -40°C to 125°C. The device is available in a SOT-23-5, SC-74A, and SOT-753 package. The TLV70433DBVT is suitable for a wide range of applications, including automotive, industrial, and consumer electronics. It can be used in applications such as power management, voltage regulation, and battery charging.

The HD64F3664HV is a 16-bit microcontroller from Renesas. It is based on the H8/300H architecture and is designed for embedded applications. It features 32KB of Flash memory, a 16MHz clock speed, and a 64-QFP package. It is rated for operation from -20°C to 75°C (TA).

Description: The Microchip Memory IC 24AA025E64T-E/OT is a 2K (256 x 8) EEPROM with a Serial (with MAC Address) format. It is designed to operate in a wide range of temperatures from -40°C to 125°C (TA) and a voltage supply of 1.7 V to 5.5 V. It has an I2C, 2-Wire Serial interface with speeds of 100kHz and 400kHz. The device is packaged in a SC-74A, SOT-753 package and is available in a SOT-23-5 Supplier Device Package. It is supplied in Tape & Reel (TR) packaging.

Atmel ATXMEGA128A4U-MHR is an 8-bit microcontroller with 128KB of Flash memory and 44-pin QFN package. It is based on the AVR XMEGA architecture and is designed for applications requiring high performance, low power consumption, and advanced peripherals. Features: • 128KB of Flash memory • 44-pin QFN package • Up to 32MHz clock frequency • Up to 32-bit wide data bus • Up to 16-bit wide instruction bus • Up to 8-channel DMA controller • Up to 8-channel Event System • Up to 8-channel Analog Comparator • Up to 8-channel 10-bit ADC • Up to 4-channel 10-bit DAC • Up to 4-channel USART • Up to 4-channel SPI • Up to 4-channel I2C • Up to 4-channel Timer/Counter • Up to 4-channel PWM • Up to 4-channel RTC • Up to 4-channel Watchdog Timer • Up to 4-channel Event System • Up to 4-channel Real-Time Clock • Up to 4-channel Programmable Logic Unit • Up to 4-channel Programmable Gain Amplifier • Up to 4-channel Programmable Voltage Reference