Insulating façade - Import export

SG 50K is a thermally insulated silicone facade system with a section depth of 50 mm. Vertical profiles with depths to meet different static values ​​are available in the system. Thanks to the condensate channel in the vertical profiles, facade water is easily discharged. In this system, air and water impermeability is maximized and application problems are eliminated. The hidden wing allows application with or without nails.

To avoid thermal bridges Separation of the hot dip galvanised pin from building structure through rubber plug Rubber plug absorbs structure borne noise Installation can be made before or after plastering Including hot dip galvanised threaded pin with Torx drive and two flat nuts Available for: Insulation thickness between 100 and 200 mm We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Ø 17mm Suitable for: SDS - hammer drills We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Features • Heavy-duty spacer installation for ETICS, clinker or on flat roofs • Aqua-Stop effectively protects against rotting of the facade due to moisture • Stainless steel prevents unsightly rust stains • Approved by the building authorities • Practically no energy loss • Simple and rapid installation • Smoothly adjustable insulating sleeve Iso Spacer • Suitable for insulation thicknesses and spacer installations up to 200/300 mm Description & Area of Application Thermo Proof is a heavy-duty spaced mounting system for thermally-insulated facades (ETICS) consisting of: • Iso Spacer with large contact surface and SW24 driver for better force transmission • Aqua-Stop special sealant for exterior use; incl. dosing tip; content 80ml; transparent colour • Steel parts made of stainless steel in A4 quality; M12 thread; length 300/400 mm • Static mixer extension for deep drill holes

SG 50K is a thermally insulated silicone facade system with a section depth of 50 mm. Vertical profiles with depths to meet different static values ​​are available in the system. Thanks to the condensate channel in the vertical profiles, facade water is easily discharged. In this system, air and water impermeability is maximized and application problems are eliminated. The hidden wing allows application with or without nails.

Hybrid elastomeric facade insulation paint. Water based high solid hybrid elastomeric water proofing facade coating with high tech acrylic and polyurethane resins. Fast curing and water tight against ponding water. It develops a water vapour diffusive coating which keeps its elasticity and tensile strength. It is non sticky, walkable and resistant to pedestrian traffic. It offers an excellent crack bridging ability and purability. It’s innovative synthesis permits high build coating even in one coat. It has a very good dirty pick up resistance and superior thermoreflective properties. Reliable and cost effective water proofing solution. UV and thermal ageing resistance. Easy to apply. User and environmental friendly.

If maximum storage capacity is very important and if free-flowing products are being stored, then a profiled wall silo is your first choice. The rectangular construction and the light single-wall system make maximum use of space. As the profiled wall is itself very strong, less steel is required, which also makes this an economic solution. To prevent condensation (insulated) roofing and facade cladding can be fitted to the silo. As long as the cell can be reinforced, a profiled wall also makes it possible to achieve greater surface areas per cell compared with a smooth-walled silo. This means that silos with a volume of 1,000 m³ per cell are possible. It goes without saying that the design will be suited completely to your requirements. Our profiled-wall silos can be found in, for example, coffee roasting plants and breweries, where they are used for the process-based storage of (roasted) coffee beans and (malted) barley.

STIFERITE FIRE B a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on one side by a mineralized fibre glass facers, and the other, to be positioned on toward the side more exposed to the risk of fire, by fibre glass with additional mineral fibre named STIFERITE FIRE B facer®. Specifically suggested for insulation of ventilated facades (it meets the requirements of the Technical Guide of “Anti fire safety requirements of facades in residential buildings” dated 15/04/2013). The FIRE B panel is suggested for Insulation of walls as in “ventilated facades”. Insulation for all applications where elevated fire reaction performance as in organic material insulation is required. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

Roofing membrane Hurdex windshield membrane •Hurdex windshield underlay membrane is an wind insulation for facades and walls made from a PP spunbond (flies). •Hurdex windshield membrane 10 x 1.60 m, roll = 16 m2 • Hurdex windshield membrane 50 x 1.60 m, roll = 80 m2 PRODUCT DESCRIPTION •Spunbonded PP •Extremely quick and effective work possible •UV resistance •high break stability lengthwise and crosswise •high resistance to tearing AREAS OF APPLICATION • Hurdex windshield membrane is used in all types of facade works, as well as in the form of a wind barrier in ventilated facades and frame structures. Basis weight (EN 1849-2)100 g/m2 (±10 g/m2) Maximum tensile strength (EN 12311-1) MD190N/50mm CD120N/50mm Elongation at maximum tensile force (EN 12311-1) MD50% CD60% Tear resistance (EN 12310-1) Temperature range -40 °C to +90 °C Diffusion equivalent air layer thickness (sd value) (EN 12572 climate C)0,01 m Reaction to fire (EN 13501-1)Class E

CNC STYROFOAM CUTTING MACHINE is used in the production of products such as jambs, panels, crown, floor pile, appliqué keystone which are used for insulation and decoration in external facades.

Fiberglass mesh for facade work. It is widely used in finishing plastering works as a reinforcing layer, in order to prevent cracking of the plaster. Using this mesh will increase the durability of the finish. Prevents the appearance of cracks on the surface due to changes in temperature and humidity, mechanical influences, non-compliance with the technology for preparing building compounds, etc. Doesn’t require a lot of plaster or putty. The Djofra-M glass mesh is easy to use and safe for human health and the environment. Scope of application: For reinforcing plaster facades and external insulation systems, strengthening the places of joining the walls of window and door frames, protecting surfaces from the appearance and spread of cracks during outdoor work. It is widely used in ETICS facade insulation systems wet facade.

Fiberglass mesh for facade work. It is widely used in finishing plastering works as a reinforcing layer to prevent cracking of the plaster. Using this mesh will increase the durability of the finish. Prevents the appearance of cracks on the surface due to changes in temperature and humidity, mechanical stress, non-observance of the technology for the preparation of building compounds, etc. Doesn’t require a lot of plaster or putty. The Djofra-M glass mesh is easy to use and safe for human health and the environment. Scope of application: For reinforcing plaster facades and external insulation systems, strengthening the places of joining the walls of window and door frames, protecting surfaces from the appearance and spread of cracks during outdoor work. It is widely used in ETICS facade insulation systems wet facade.

Fiberglass mesh for facade work. It is widely used in finishing plastering works as a reinforcing layer, in order to prevent cracking of the plaster. Using this mesh will increase the durability of the finish. Prevents the appearance of cracks on the surface due to changes in temperature and humidity, mechanical influences, non-compliance with the technology for preparing building compounds, etc. Doesn’t require a lot of plaster or putty. The Djofra-M glass mesh is easy to use and safe for human health and the environment. Scope of application: For reinforcing plaster facades and external insulation systems, strengthening the places of joining the walls of window and door frames, protecting surfaces from the appearance and spread of cracks during outdoor work. It is widely used in ETICS facade insulation systems wet facade.

Alkali-resistant fiberglass mesh 110 g, with a mesh size of 10×10 mm, professionally reinforces and powerfully fixes the surface in case of a thick plaster layer. Excellent chemical and mechanical resistance. Flame retardant, resistant to tears and sudden changes in temperature, prevents the formation of cracks in the coating layer of the plaster. Application: for reinforcing cement mortars used for screed or underfloor heating, for the manufacture of curbs, steps, walkways and other structures experiencing increased stress. Scope of application: For reinforcing plaster facades and external insulation systems, and also recommended for rooms with high humidity.

Automatic glass washing and combining line with hydraulic panel press can assemble and press double, triple or structural (step, facade) insulating glass units.

industrial profiles, joinery profiles, facade profiles, thermal insulation profiles, railing profiles, glazed balcony profiles.PVC Door and Window Systems

Features and benefits: - Accurate countersunk setting - TFIX-DEVICE automatically sets the fixing flush with the insulation layer. - Stainless steel screw for best anti-corrosion protection. - Integrated insulation cap (with unique surface reinforcement) equalizes thermal conductivity over the fixing point, whilst also leveling out drying times of render. - Unique sleeve compression zone for precision installations. - Simple countersunk installation in all substrates (A,B,C,D,E). - The long plastic overmoulding on the TFIX-8ST screw minimises thermal bridging (value 0.001-0,002W/K), contributing to energy-saving benefits - Plate stiffness (value 0.6 kN/mm) ensures smooth elevation surface and stable insulation system. - Pre-assembled elements of the fixing saves time and labour - Unique design allows for high load-bearing capacities. This reduces the quantity of fixings required per square metre of insulation - The shortest embedment depth at the maximum strength parameters

Fiberglass mesh LATYMER STANDARD 160 is a good ratio of price and quality. The goods are in special demand among large construction companies in Ukraine. The fiberglass mesh protects the facades from cracks and destruction – it reliably strengthens the surface during external plastering, as well as in facade insulation systems in houses with increased number of storeys. The STANDARD series is accompanied by European and Ukrainian certificates of conformity. For the national market, the product has a certificate issued by UkrSEPRO, mass per unit area of the mesh 160 g/m2 meets the State Building Standards of Ukraine (DBN). The material has tensile strength (≥30 / ≥48 N/mm), is resistant to acids, alkalis, temperature and moisture. The fiberglass mesh is ease to use. The STANDARD series reliably reinforces the facade and is able to maintain its integrity for 20 years.

Fiberglass mesh LATYMER ECONOMIC 140 is quality at an affordable price. The product is produced for the Ukrainian construction market and is an indispensable element for strengthening the surface during external plastering, as well as in facade insulation systems of medium and low buildings. The ECONOMIC series is accompanied by Ukrainian certificates of conformity issued by UkrSEPRO, international ISO 9001:2015 and Quality Passports. The material has tensile strength (≥22 / ≥34 N/mm), is resistant to acids, alkalis, temperature and moisture. The fiberglass mesh is ease to use. The ECONOMIC series reliably reinforces the facade and is able to maintain its integrity for 15 years.

Fiberglass mesh LATYMER ECONOMIC 160 is quality at an affordable price. The product is produced for the Ukrainian construction market and is an indispensable element for strengthening the surface during external plastering, as well as in facade insulation systems of medium and low buildings. The ECONOMIC series is accompanied by Ukrainian certificates of conformity issued by UkrSEPRO, international ISO 9001:2015 and Quality Passports. The material has tensile strength (≥22 / ≥36 N/mm), is resistant to acids, alkalis, temperature and moisture. The fiberglass mesh is ease to use. The ECONOMIC series reliably reinforces the facade and is able to maintain its integrity for 15 years.