Ionisers - Import export

This nozzle has been designed especially for neutralising and cleaning (small) bottles on the inside, etc. Ionisation takes place at the end of the tube from which the air is blown. The high-voltage point is not shockless. The tubes are available in two diameters and in a required length. Features - Working distance: 150 mm max. - Air consumption with 1/4” tube: 4 Nm3/h using 1 bar - Air consumption with 3/8” tube: 8,5 Nm3/h using 1 bar - Max. pressure: 6 bar - Shockless touchable emitter - Especially designed for neutralising and cleaning (small) bottles on the inside

The Flat ionizing air nozzle is used to clean and neutralize electrostatically charged surfaces. The use of compressed air allows awkward places to be neutralized and cleaned as well. Connected to a Simco power unit, the ionizing air nozzles produce an air flow which is rich in positive and negative ions. When this air flow is pointed to an electrostatically charged area, electrons are exchanged until the area is neutralized. This makes that the material is neutralized during the blow-off process and prevents the blown-off particles from being re-attracted. The current of the Flat Nozzle is limited, so that the emitter point is safe to touch. The Flat Nozzle is especially suitable for neutralising at the feeding and delivery sections of machines in the printing industry. Features - Working distance: 50-300 mm - Air consumption: 5 Nm3/h using 1 bar - Max. pressure: 6 bar - Shockless touchable emitters

The high voltage at both emitter points is current limited. Being installed outside the air flow, the high-voltage points are hardly subject to fouling, if at all. The nozzle blowoff force is high at a relatively low air consumption. Features - Working distance: 250 mm max. - Air consumption: 3,5 Nm3/h using 1 bar - Max. pressure: 7 bar - Shockless touchable emitters - Being installed outside the air flow, the emitter pins are hardly subject to fouling, if at all - Can be fitted on a standard air header - Click system for easy assembly

The Cobra ionizing air gun is excellently suited for heavy-duty industrial applications. It has a lightweight durable gun body made of highimpact plastic. The airflow is controlled by the trigger. The air flow is amplified by a minimum factor of 6 : 1 by drawing in ambient air through the rear. The high-voltage point integrated aerodynamically in the gun body cleans itself during use. The gun comes standard with 6 metres of cable. Two guns at most can be connected to a single power unit. - Working distance: 600 mm max. - It comes standard with 6 metres cable, 12 metre is also possible - Ideal for heavy-duty industrial applications - The emitter pin is cleaned during use

This gun is electrically safe and shockless. The emitter point is coupled capacitively to the high voltage. Thanks to its rugged design this gun is ideal for heavy-duty industrial applications. The airflow is controlled by the trigger. It comes standard with 3 metres of metalshielded cable. One or two guns can be connected to one power unit. Features - Working distance: 300 mm max. - It comes standard with 3 metres cable, 6 or 9 meter is also possible - Ideal for heavy-duty industrial applications

Simco-Ion's Top Gun III is developed for light industrial applications. A high ion production attend to an optimal neutralisation of static charges. High blow-off force and low air consumption provide high-efficiency cleaning. A filter at the exit of the gun ensures that the air is clean. The gun body is lightweight and durable. It features a light-touch trigger, making it comfortable even for extended use. All functionality is built into the gun, including a flowcontrol valve, and a two-level LED which indicates if the gun is in ''stand by'' mode and if high voltage is currently active. Both the gun and cable are static dissipative. A hanger is provided for easy mounting. One gun can be connected to one power unit. Top Gun Side Kick The Top Gun Sidekick offers handsfree operation. A foot pedal controls both ionization and airflow. The Top Gun Side kick includes a flexible mount feature with a bracket for flexible positioning.

Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and the Pinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 6 - Dimensions: Length 166 x Ø 20 mm

Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and thePinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 5 - Dimensions: Length 166 x Ø 20 mm

Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and the Pinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 3 - Dimensions: Length 158 x Height 35 x Ø 20 mm

The HDR charging bar suits high velocity applications. Each individual point being fitted with a resistor, so the chance of spark-over is strongly reduced. features - Charging bar - Working distance: 20 mm using <30 kV, 75 mm using 30-60 kV - Suits high velocity applications - Chance of spark-over is strongly reduced

These rugged charging bars are used in a variety of industrial applications. The slot at the rear of the charging bar permits easy mounting. HDC charging bars are provided with a resistor to avoid failures in the machine control system in the event of accidental spark-over. The cable output may be straight or right-angled (90°). Features - Charging bar - Working distance: 20 mm using <30 kV, 75 mm using 30-60 kV - Suitable for a variety of industrial applications - At an unforeseen spark it doesn’t create an interruption in the machine control

CM5 is fully backwards compatible with ECM30/60 and ECM DI30/60. For basic users a quick set-up menu is provided to set-up the generator to function as an ECM30/60. The Menu is available in English, German, French and Italian. The new standard function Current Control will enable you to set a constant current vs a constant voltage. This will provide a much more stable charging and will compensate contamination and emitter pin wear automatically. Advanced Current Control is a revolutionary new feature. The generator keeps track of the supplied current to the electrode. It senses when there is no material to be charged and switches the current to a safe low level. This prevents sparkover and emitter pin wear. When material is reinserted the current will switch back to the high level current. A serial bus interface can be fitted additionally to enable the generator to communicate through serial bus interfaces s.a. Profibus or CANopen (Other serial protocol available on request).

CM5 is fully backwards compatible with ECM30/60 and ECM DI30/60. For basic users a quick set-up menu is provided to set-up the generator to function as an ECM30/60. The Menu is available in English, German, French and Italian. The new standard function Current Control will enable you to set a constant current vs a constant voltage. This will provide a much more stable charging and will compensate contamination and emitter pin wear automatically. Advanced Current Control is a revolutionary new feature. The generator keeps track of the supplied current to the electrode. It senses when there is no material to be charged and switches the current to a safe low level. This prevents sparkover and emitter pin wear. When material is reinserted the current will switch back to the high level current. A serial bus interface can be fitted additionally to enable the generator to communicate through serial bus interfaces s.a. Profibus or CANopen (Other serial protocol available on request).

A compact high voltage supply with an adjustable output voltage of 0 - 20 kV (with a maximum current of 0,7 mA) clearly shown on the digital display. State-of-the art electronics are employed with a remote control option. The power supply is available with a positive or negative output voltage. A warning lamp lights up if the system is overloaded or in the event of spark-over. Features - Output voltage of 0 – 20 kV - Available with a positive or negative output voltage - Remote control is possible - A warning lamp lights up if the system is overloaded or in the event of spark-over - 180 ° reversible control panel equipped with membrane switches

The Airknife with Performax IQ Easy is especially useful for situations where the ionisation or cleaning needs to be mobile s.a. cleaning parts with a robot. With the 24V connection it is easy to install in such applications. The Airknife with Performax IQ Easy is standard available in 4 lenghts, 150, 310, 460 and 610 mm. Longer combinations on request. Features - Working distance: 3000 mm max - Removes dust and other contaminations and neutralises the static charge and prevents retraction contaminants - Installation possible on moving machine parts such as a robot arm - Shockless touchable emitters

Manager IQ Easy: the heart of the IQ Easy Platform Manager IQ Easy Introducing a new level of static control; the heart of the new IQ Easy platform is the Manager IQ Easy. It comprises of a Control unit with a 7'' LCD touch screen, provides information from all the connected devices and makes it easy to change and monitor status and parameters. Up to 6 IQ devices can be directly connected to the Manager IQ Easy. The 24V DC power distribution is routed via the Manager, so no extra cables! This makes the connection of a device even easier than connection to a single desktop power supply. The Manager IQ is available in 2 versions: 1) Input voltage 100 - 240V /50-60 Hz This unit converts the input voltage to 24V DC and provides power to all 6 ­connected devices. 2) Input voltage 24V DC This model needs a 24V power input provided by the user. Further extension of devices is possible using the Extension IQ Easy. This adds ­another 6 devices to the system with a maximum of 30.

Sensor IQ Easy: that measures the electrostatic charge A sensor that measures the electrostatic charge of a web can be added to the IQ Easy platform. The Sensor IQ Easy is a bar type device that can hold op to 16 sensor heads. Each sensor head can be placed on a strategical position across the web to monitor the electrostatic charge. All data of each sensor head is communicated to the Manager IQ Easy and stored for process monitoring. For dirty environments or for precautionary protection of the sensor heads, the Sensor IQ Easy bar is equipped with a compressed air connection. Using only a very low pressure and air volume dirt entering the orifice of the sensors is prevented. Anti static bars or charging generators in the system can act on data received from a sensor. This makes it possible to control the static charge level on the web in real time using a closed loop feed back and correction routine.

The FMX-004 is a convenient, compact and pocketsized electrostatic fieldmeter. With this fieldmeter you can measure and store the field strength and polarity. It enables you to carry out measurements in awkward places. The correct measuring distance is displayed by two integrated LEDs. The electrically conductive plastic housing with an earth connection fitted at the side ensures accurate measurements. The unique bicolour display shows the measured value both numerical and graphically. The status of the battery is shown on the display. features - Accurate measurements - Electricity conductive plastic housing with an earth connection - Possible to carry out measurements in awkward places - Indicator for battery status - Pocket-sized

This power unit is equipped with two high-voltage transformers with 180°phase-shifted output voltages. As a result, the anti-static bars connected to the power unit produce positive and negative ions simultaneously. This ensures optimal neutralization of static charges even at very high velocities. This power unit is fitted with two high-voltage indicators and an on/off switch with an indicator lamp. Feeatures - Suitable for very high production velocities - Fitted with two high-voltage indicators - Fitted with an on/off switch with an indicator lamp

The MultiPowerMaster or MPM is part of the high voltage power unit range. It features a broad range of input voltages, from 100240-V AC/5,060 Hz as well as electronically stabilized output voltage. The output voltage is factory preset to 7, 5, 4, and 3.3 kV. Red and green LEDs are incorporated in the top face of the unit. There is an option for the MPM to be fitted with an I/O connector for interfacing with a PLC, the F.E. Optional I/O signals are available for overload, high voltage present, and remote on and off. A 24-V power source is featured with the I/O connector, which enables use with the Typhoon air pressure sensor.

The ThunderION Control Module provides the power and the control for up to four ThunderION anti-static bars. With this Control Module, you can control all connected ThunderION anti-static bars and check they are working correctly from a central location. The Control Module operates on the mains voltage, which can be turned on and off with a switch. A cable with a pre-assembled connector at each end links the ThunderION anti-static bar with the Control Module. This offers quick and easy assembly. All cables carry just 24 V. The Control Module enables you to check the functioning of each connected anti static bar. A green LED indicates that the bar is switched on. A red LED indicates that a fault has been detected. Via the I/O port, you also have the option of switching each bar on/off remotely and separately, as well as checking its correct functioning. Features - Provides power for up to 4 ThunderION anti-static bars - Controls the operation for up to 4 ThunderION anti-static bars by

Extension IQ Easy: an extension to the IQ Easy Platform The IQ Easy platform with at least one Manager IQ Easy can be extended with the Extension IQ Easy to control an additional 6 devices. The Extension IQ Easy comprises of a Control unit without a display. Status LED's show the power on and overall warning or alarm status. Up to 6 IQ devices can be connected to the Extension IQ Easy. The 24V DC power distribution is routed via the Extension. So no extra cables!This makes the connection of a device even easier than connection to a single desktop power supply. The Extension IQ Easy is available in 2 versions: 1) Input voltage 100 - 240V /50-60 Hz This unit converts the input voltage to 24V DC and provides power to all 6 devices connected. 2) Input voltage 24V DC This model needs a 24V power input provided by the user. Further extension of devices is possible by using multiple Extension IQ Easy's. Each Extension adds another 6 devices to the system with a maximum of 30 devices.

The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airknife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Features Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning Direct-drive motors require little or no maintenance Anodised finish for corrosion protection Connection for pressure sensor New design extruded aluminium profile Cost efficient versus compressed air

The BlowION ionising air blower has been designed for multifunctional applications. It features an ergonomic, robust designed extruded anodized aluminum housing. The integrated fans and the intelligent positioning of an anti-static bar and a high effective neutralising technique to provide long range ionization over a large area. The patented built-in cleaner brush maintains the ionisation production at optimum results by simply sliding from right to left. No external HV wiring is required as the power supply is incorporated (only line cord). The provided bolts warrant a simple installation and a quick Plug and Play of the unit. The BlowION is available in standard lengths from 520 mm effective length up to 1960 mm, in increments of 160 mm which covers most un- and rewinding applications. Features - Working distance: 1000 mm max. - Working width: 520 - 1960 mm - Integrated power unit - Plug and Play - Makes it possible to neutralise at distance on a large surface

The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airkife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Airpressure sensor Each Typhoon system is supplied with an airpressure sensor wich can measure the air pressure inside the airknife. If the pressure drops under the required level, the system does not work optimal. A system check is then neccessary, often it appears that the air filter needs to be cleaned. Power unit A2A7M Typhoon systems with EP-Sh-N anti-static bars incorporate a power unit type A2A7M.

The HP-N-Ex ionizing air blower consists of a motor and a fan. The ambient air is drawn on one side and blown off along an anti-static bar. The effective ionizing width is 500 mm. This ionisation blower has been approved for use in certain explosion-hazardous environments. The power unit is integrated in the anti-static bar. - Working distance: 1500 mm max. - Working width: 500 mm - Approved for use in certain hazardous environments - Integrated power unit

The VolumION is a very robust ionizing air blower with an effective ionising width of 500 mm. The VolumION consists of a motor, two fans and an ionisation unit. Ambient air is drawn on two sides and blown off along three anti-static bars. The air flow that is drawn in is adjustable on both sides. This ionising air blower is also ideal for long range neutralising when paper and film webs are being wound. The air inlets can be fitted with a special filter. Features - Working distance: 1500 mm max. - Working width: 500 mm - Ideal for long range neutralising when paper and film webs are being wound - Built-in shockless anti-static bars - The air inlets can be fitted with a special filter

The Aerostat Sentry ionizing air blower neutralises static charges perfectly. The Sentry has been designed for areas where static electricity causes problems, ranging from dust and dirt attraction to uncomfortable electrical shocks to personnel. The Sentry is ideal for light industrial environments and it increases productivity. The Sentry is excellently suited to neutralise static charges on threedimensional objects, for instance injection moulded products. This ionizing air blower stands out for its compact design. It has an integrated fan which draws in the ambient air and blows the air off along the anti-static bars. The air inlet may be fitted with a special filter. The air volume can be adjusted electrically. The high-voltage power unit for the anti-static bars is also integrated. The anti-static bars are equipped with a (patented) cleaning system. The control knobs at the rear are easily reached and operated. Features - Working distance: 1000 mm max.

The Cleanflex Easy ionising air gun can be used for cleaning and neutralising surfaces. It’s unique features, not seen in any other ionising guns, make it very versatile to use. Ergonomic, hand or pull down, less air consumption, low noise, better blow-off force. - 24V DC input voltage and integrated ionisation power unit The Cleanflex Easy has a 24V input voltage, easily connect by a standardised M12 connector. No cumbersome high voltage cable and big transformer unit as seen in traditional ionisation guns. - Lightweight A Durable plastic housing and a well-constructed weight distribution make it a well balanced comfortable gun to use. - Ergonomic design The grip has been designed to suit women’s as well as man’s hands and has a soft grip and grip fixation making it very easy to hold without any muscle tension. - Full hand trigger (no RSI strain on one finger) The air flow is controlled with a full hand trigger, making operation very comfortable.