Industrial containers - Import export

TIPPING CONTAINERS Tipping containers in steel sheet painted watertight, with the base fork mounted for lifting with a forklift. They are supplied in series with settling tank, filter sheet for the separation of liquids or solid substances and cap for the discharge of liquids. The reversal is automatic and is done via the release lever. A rope is used to activate the lever directly from the cab of the truck and then to operate in maximum security. All containers are equipped with wheels for manual handling. On request they can be equipped with feet.

Containment tanks made of robust, non-toxic, stabilized U. V. polyethylene, very resistant and light. They are suitable for the safe storage and emptying of 1000 liter tanks. The tanks can be forked with forklift trucks and transpallets and can be superimposed to facilitate storage when not in use. They are resistant to most acids, bases and oils. The standard color is orange but it is also possible to request the high visibility yellow tanks by paying a supplement and by contacting us in advance for confirmation. Monobloc - self-supporting with removable grid - movable with forklift The tanks are available in two models: FPC1 1000 PE single tub in polyethylene with capacity 1500 kg. - suitable for a 1000 l tank. FPC2 1000 PE double tub in polyethylene with capacity 2500 kg. - suitable for two 1000 l tanks. side by side.

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The bucket is secured to the forks of the forklift truck by means of the supplied chain and to carry out the overturning it is sufficient to operate the release lever directly from the driver's seat of the forklift truck (by means of a rope) and therefore to operate in maximum safety. The tipping container is complete with polyurethane wheels with brake and gas shock absorbers to control the tipping speed Features - Rotational molded monobloc container (robust, handy and light) - Double wall with cavity, smooth interior and rounded edges - Reinforced base with ribs - Forked structure built with galvanized steel - N° 2 gas shock absorbers and end-of-stroke device for progressive tipping - N° 2 fixed wheels and 2 swivel wheels with brake

Outdoor storage, suitable for storing a small cistern with a capacity of 1100 liters. Made of 12/10 thick carbon sheet, painted in polyester for outdoor use. The deposit is equipped with lateral ventilation grilles, openeable top, hinged doors, handle with lock equipped with double key and watertight collection tank. Comes with safety stickers. It is the user's responsibility to verify that the products intended to be stored and moved are compatible with the construction material and any painting of the deposit.

SINGLE AND DOUBLE PE CONTAINMENT TANKS FOR 1000 LT TANKS. - DIRECT LOAD Direct load containment tanks made of sturdy polyethylene, very resistant and light. They are suitable for the safe storage and emptying of 1000 liter tanks. In the models with direct loading, the grid or pallet supporting the tank are replaced by the presence of special lateral supports which make the product particularly robust. The tanks are resistant to most acids, bases and oils. The standard color is blue. FPDC1 1000 PE direct charge single tank with load 1500 kg. - suitable for a 1000 l tank. FPDC2 1000 PE direct charge double tank with load 2500 kg. - suitable for two 1000 l tanks. side by side.

METALLIC CONTAINMENT TANKS FOR 1000 LITERS IBCS Containment tanks, specific for 1000 liter cisterns. They are available for the storage of 1 or 2 cisterns. The containers of polluting liquids must be stored in a safe manner, in order to prevent contamination of the aquifers in particular. The collection tanks are watertight, painted with epoxy powders and the support surface is in hot galvanized grating and can be removed. Blue RAL 5010 color. The tanks are equipped with special seats for forklifting. Available models: FPB826S: tank for the storage of 1 1000 liter cistern FPB8070C: tank for the storage of 2 1000 liter cisterns It is the responsibility of the user to check that the products destined to be stored and handled are compatible with the construction material and any painting of the tanks.

Equipped with handle and wheels. TANK FOR LIQUID COLLECTION SERIES FPB821/822R - WITH WHEELS The containers of polluting liquids must be stored in a safe manner, in order to prevent contamination of the aquifers in particular. The collection tanks are watertight, oven-painted with epoxy powders and the support surface is in hot-galvanized grating. Models equipped with highly smooth wheels can be easily moved inside the storage areas. The lateral safety bulkhead makes them suitable for storage. They can be lifted with a forklift or a pallet truck.

GALVANIZED PALLET BOX FOR GAS CYLINDER STORAGE The galvanized cylinder pallet allows the storage of up to 12 cylinders in a vertical position. It is equipped with lifting hooks with cranes and safety stickers already included. To facilitate the loading of the cylinders there is a folding platform in embossed plate. The cylinders are held in place by a bar that can be lifted and locked using a steel pin.

CONTAINERS WITH OPENABLE BOTTOM - ONE OPENING - FOR SEPARATE COLLECTION AND INDUSTRIAL WASTE Containers in electro-welded steel, powder coated, equipped with feet. Ideal for use in separate collection of urban, artisanal and industrial waste, for materials such as wood, iron, paper, metal scraps, chipboards etc. The containers can be hooked and lifted by forklift. Waste collection takes place by inserting waste materials from above; while the emptying, for the unloading of the waste, takes place from the bottom, and is accomplished through the actuation of the lever placed on the side of the bin. A cable can be attached to the lever to allow the operator to operate it without having to get off the forklift. The bottom with total opening guarantees a quick and complete unloading of the inserted materials. Since the bins are not hermetically sealed, they are not suitable for inserting waste and residues, soaked in liquids, solvents, oils or the like. The boxes are blue.

Plastic containers 300/600/700 PLUS in an approved version for the transport and storage of exhausted batteries in compliance with ADR regulations. They can be stored outdoors and can be stacked and forklifted with a pallet truck and forklift. Overlapping is possible via 4 pins printed directly on the upper part of the boxes which fit into the special holes on the bottom of the feet of the overlying container. Easy to clean thanks to the smooth internal walls, they do not absorb odors and humidity. The boxes are equipped with two crossbars on the long side and resist deformation thanks to their structural rigidity. All models are equipped with an identification label showing the types of storable batteries. Standard color gray RAL 7001 The battery boxes are supplied without a lid (sold separately as an option) On models for batteries it is not possible to apply the hole with the screw cap or the tap.

Stackable and suitable for forks lift. Available in industry version (industrial gray) or food version (RAL 7001). Ideal for textile industry, pharmaceutical industry, metalworking, plastics processing and food industry. Easy to clean, does not absorb odors and moisture. Storable outdoors. Available with feet, runners or wheels. Are movable with pallet trucks and forklift. The bins can be ordered with 4 legs, runners and 4 wheels without brakes. The version with 4 wheels without brake can be transformed into the version with 2 or 4 wheels with brake by purchasing the relative accessory. This is only a surcharge that must be applied to the bins that already has wheels (it cannot be applied to the bins with the feet).

Unbreakable and professional containers used in food service and industrial. Colour Grey. Available with or without front door. Stackable and suitable for forks lift. Available in industry version (industrial gray) or food version (RAL 7001). Ideal for textile industry, pharmaceutical industry, metalworking, plastics processing and food industry. Easy to clean, does not absorb odors and moisture. Storable outdoors. Available with feet, runners or wheels. Are movable with pallet trucks and forklift. * Door Dimensions 782x40x236 mm h The Model 700 PLUS is available in: - Technical Grey - Food RAL 7001 - Standard without door opening (SP version) - With door opening (version PC) The bins can be ordered with 4 legs, runners and 4 wheels without brakes. The version with 4 wheels without brake can be transformed into the version with 2 or 4 wheels with brake by purchasing the relative accessory.

METAL CONTAINERS WITH OPENABLE BOTTOM - MOD. FP B637/638 Very robust metal containers, suitable for the collection of processing waste and building materials. The CP-CT containers allow to be lifted with the forks of the forklift or with the 4-branch chains, depending on the model and arrangement. The operator can open the bottom of the body by using a rope and remaining at a safe distance. The openable bottom allows you to empty the container comfortably and quickly in larger containers or specific areas for disposal. Built in painted steel. All standard models are wheelless. The 1000 liter series can be equipped with wheels and cover.

BIGBAG containers with mesh bottom with removable uprights. Suitable for containing 1000 liters BIGBAG with dimensions mm. 900x900x1000h and 1000 kg load. BIG BAG bags are normally used for the separate collection or containment of scraps of various types. The BIG BAG containers are available in the following models: FPB.15 container for 1 1000 L BIG BAG - painted FPB.15Z container for 1 1000 L BIG BAG - galvanized FPB.15VV container for 1 1000 L BIG BAG - painted with collection tank covered with galvanized grid

he RC-CC3200 module is the second-generation series of modules in the SimpleLink family and consists of an applications microcontroller unit (MCU), Wi-Fi network processor, and a power-management subsystem. The module comes integrated with all required components including on-board flash, clocks, and RF filter for easy hardware integration and quick time-to-market.The applications MCU subsystem contains an industry-standard ARM Cortex-M4 core running at 80MHz. The RC-CC3200 module supports a wide variety of rich peripherals, including fast parallel camera of embedded RAM memory options, with peripheral drivers in ROM memory. The series also includes a secure device with on-chip 128-bit secret key supporting secure boot as well as applications and user data encryption.