Plastic machining - Import export

ME-FDE SEALERS WITH DOUBLE MOTORIZED PULSE SEALING BAR AND TEMPERATURE CONTROL The new bench sealers with double impulse sealing bar and temperature control, allow the optimal sealing of any type of envelopes and sealable bags. The high pressure exerted by the motorized descent of the bars (0.7 Kg./cm2) allows perfect sealing even on very thick materials. The double active motorized sealing bar (heats above and below) and the 5 mm sealing they allow the closure of envelopes with high thickness, laminated and envelopes with bellows. In addition to sealing polyethylene, polypropylene, coupled paper, aluminum, pvc and medical bags, it also allows the sealing of advertising banners. To seal the banners, we recommend sending samples, without obligation, to carry out the sealing tests. Maximum sealable thickness 0.20 mm (0.40 tot). Timers for regulating the sealing and cooling temperature ensure maximum reliability on all types of material.

The ME-FD double Impulse sealers with pedestal incorporate twin elements (top and bottom) for heavy-duty applications and can accommodate up to 0.5mm material. Makes a 5 mm wide seal and fuses the material from both sides. Ideal for sealing large heavy bags. Also equipped with slide switch to select single side sealing or double sides sealing. By having a foot control, the hands are free to feed the machine. Units come complete with pedestal, stand, adjustable working plan and adjustable foot control. The sealing time is adjustable with a timer and is indicated by a light. Easy and simple to operate. No pre-heating required. Maximum seal thickness 0,25 mm. (0,50 mm total).

Impulse sealer with mechanical pedal and floor support for the closure of bags in plastic material heat-sealable, impulse sealing (resistance to heat for a few seconds) and timer for adjustment. At the end of the sealing is possible to trim the bag with the cutter installed on the bar. The open structure also allows you to install a coil on the back of the machine and to obtain envelopes of the desired length using the tubular film. The sealing head can be tilted up to 45 ° to allow the closure of the envelopes containing liquids or powders. Maximum thickness of 0.15 mm sealable . (0.30 mm. Overall)

Semiautomatic table top version or with pedestal sealing machine with electrical pedal and double sealing impulse bar, (resistance to heat for a few seconds), suitable for closing envelopes polyethylene, polypropylene, PVC, coupled in aluminum, etc. The closing of the sealing bars by pressing the electric pedal with solenoid allows the operator to have both hands free. The timers for adjusting the sealing and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. The double sealing bar (above and below) and the sealing of 5 mm. allows the closing of envelopes with thick, laminated bags and bellows. Through a selector switch, you can choose whether to use one or two sealing bars. Maximum solderable thickness 0.25 mm. (0.50 mm. overall). It's also available the model ME 6010 FDA / FDV with 600 mm sealing bars and 10 mm welding.

Table top sealer with electric foot pedal and impulse seal suitable for the closures of envelopes in heat-sealable plastic material such as polyethylene, polypropylene, PVC, etc. The foot pedal with magnet hold downd closure, allows the operator to have both hands free. Simple to use and does not require preheating.

Dual heat multipurpose. Hand held constant heat sealer. Ideal for sealing clam shells or for tacking. Supplied with a high and low temperature control switch and proportional temperature control system. To spot seal OPS, PSP, PVC, and EPS food container.

Sealer machine designed for sealing of packaging of any size in the barrier material (polypropylene, paper and aluminum). Thanks to the small size and limited weight can be used in any place. The clamp sealing double hot bar is available with width mm. 200, mm. 300 and mm. 400 and the welds are repeatable, side by side, regardless of length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C by a temperature controller positioned on the caliper.

PORTABLE CONSTANT HEAT SEALER – SUPER CELLO ( for multi-layer bags) T Clamp sealers suitable for the sealing of large packaging in barrier material (polypropylene, laminated paper and aluminum) and polyethylene. Thanks to the power cable of 4.5 meters you can move easily around the product to be packaged. The clamp sealer performs a dual hot jaws over a length of 42 cm. The sealers are repeatable, one beside the other, without length limits. The temperature of the sealing bars is adjustable from 60 ° C to 250 ° C by a thermoregulator positioned on the caliper. The longitudinally knurled bars and coated with an anti-adhesive treatment are also suitable for welding polypropylene.

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal

Tabletop manual bag sealers with manual closing and electromagnetic block. Impulse heat sealing (the resistance heats for a few seconds) with timer for adjusting the sealing time and a timer for adjusting the cooling time. The sealing cycle is indicated by an indicator light. Sealing bar length: mm. 300 - 400 and sealing width of 5 mm, maximum thickness weldable 0.20 mm(mm. 0.40 total). Suitable for sealing plastic polyethylene bags of medium thickness, polypropylene, light coupled polyethylene + aluminum / paper.

PNEUMATIC SEALER SM 40 P - PLASTIC BAND Pneumatic sealer Mod. MINI SM 40 P, robust and safe, built entirely in painted steel suitable for closing polythene bags with clipband (plastic with double metal core). Also available with engraved date or ink date. All parts in contact are made of AISI 304 stainless steel suitable for contact with food.

The power controllers REVO TH are one of the latest born into the REVO family. Despite the formidable compactness, inside there are three independent SCR power units , which thanks to thyristor abundantly oversized in their junctions, they can manage currents up to 90A with a maximum voltage of 600V. Using Modbus and/or the more common fieldbus, multiple units can be connected to each other and therefore the ideal application area is the control of heating elements on multiple zones such as the simultaneous control of multiple IR lamps. Other application sectors can be for example: Multizone ovens Machines for plastics (extruders and extrusion lines, extrusion heads and hot runner mold control units) Packaging machines Ovens with long, medium and short wave IR lamp

The 'RT-PK' monoblocks are designed for packaging liquid and dense products such as yogurt, probiotics, milk, liquid cream, sauces, syrups, and spreadable creams, into bottles and jars with pre-threaded or snap-on plastic caps. These machines include: -Filling Station, available in single or multi-head configurations. The filling process utilizes a volumetric system with rotary pumps made of AISI 316 stainless steel, controlled by a PLC and inverter. -Bottom filling valves are available as an option. -The caps are picked up from the release head by a pneumatic arm and placed directly onto the bottle, where they are screwed or pressed into place. In addition to or instead of the capping station, the machines can be equipped with a heat-sealing head with one or two heat-sealing punches, used to seal the caps with a film from a reel. Hourly production capacity: from 900 to 2,000 bottles per hour, depending on the machine version and the product.

Bossong plastic sleeves with thread ends for continuous protection system; nylon insulation washer; metallic pipe fittings drilling machine/BOS TP plastic sleeves.

Sliding Head Lathes Parts and Components Machining of Parts and Components made to drawing from ferrous and non ferrous materials (plastics) - CNC machined parts and components made by milling and turning with machine centers and multi axix sliding head CNC lathes from alluminium, steel, plastics ecc. Application: all sectors of the industry – systems, appliances, machineries and devices components