Vacuuming - Import export

Main features • Management of the process time and temperature through the heat exchanger • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen • Heat exchanger on mixing chamber for heating / cooling processes

Pressure / Vacuum control valves suitable for safeguarding containers during loading / unloading phases of powder, grain and fibre products

Selected by the White House U.S.A.Strong and reliable – ideal for contract cleaners5 levels of filtration with HEPA filter (optional)Accessories on boardDouble body/base support with quick releaseStainless steel guidesAvailable in 3 sizes: 380 (15″), 450 (18″, 500 (20″)

VOMM Turbo Concentrator permits to obtain concentrated products close to the phase change at any viscosity grade. Vacuum version is available for thermosensitive products. Main advantages: Suitable for solution or suspension; Any input and output viscosity or concentration; Low energy consumption; Compact design with reduced height; Sound experience in chemical, pharmaceutical and agro-industrial products. Pilot plant facility is available at Rozzano headquarters.

Vacuum packaging machine with trolley and double lateral sealing bars, made of stainless steel (AISI 304). Equipped with digital panel and volumetric electronic sensor for the steady control of vacuum. Volume increased chamber and convex lid for a max eight of 250 mm. The vacuum pump of 40m3/h with three-phase 380V motor ensures high productivity. The two side bars with a length of 60 cm allow to pack more bags simultaneously (on one or both of the bars), reducing packing times. Is however possible to use it with a single bar. The DZ 600 2S packaging machine is also used for the vacuum seal and the jars of creams, jams, etc .. The vacuum chamber utilizes specific smooth envelopes for vacuum. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar.

Latest generation machine suitable for RESTAURANTS, BUTCHERS, FOOD INDUSTRIES, TRACTORIES and wherever there is the need to vacuum pack both solid and liquid products The AUTOMATIC product recognition system allows you to switch from one production to another without having to change settings. Cooks who work in the kitchen know very well how problematic it is when multiple colleagues have to use the same machine and package different products The color keypad is extremely functional and allows you to change program and vacuum percentage in just a few seconds. Extremely easy to clean vacuum chamber and raised suction.

STAINLESS STEEL VAC SERIES New series of professional external vacuum packing machine external for counter. Very robust as made entirely of stainless steel. Operation with embossed envelopes or three layered. Perfect for use in restaurants, catering or domestic environment are supplied with CE certificate and manual of use and maintenance. Main features: Working cycle fully automatic, space-saving, self-lubricating pump.

The Steam Max series has been specially designed for professional cleaning. Steam Max and Steam Max Vacuum, with a professional dry saturated steam jet and extraction cleaning function, offers a cleaning system suitable for multiple applications. Steam Max combines technology and flexibility, and is equipped with a series of accessories designed for every need.

DOUBLE CHAMBER STAINLESS STEEL VACUUM MACHINE WITH TRANSLATING HOOD FPHVC 820G - WITH ATM AND 100 m³/h PUMP Large vacuum packaging machine with two stations equipped with front and rear sealing bars, translating bell equipped with a comfortable handle and springs for weight balancing. Construction in stainless steel (AISI 304) with rounded shapes for easy cleaning, digital panel, vacuum gauge for constant vacuum control and 100 m³/h vacuum pump for a high packaging speed. The opposing sealing bars have a length of mm. 820 and the distance between the front bars and the rear bars is 700 mm. The machine is equipped with a gas injection valve (packaging in MAP).

VACUUM PACKAGING MACHINE IN STAINLESS STEEL WITH TROLLEY Vacuum packaging machine with front sealing bar and stand on wheels, made of stainless steel (AISI 304), with digital panel and volumetric electronic sensor for the steady control of vacuum. Tank increased with concave bottom and convex cover for a working height of 230 mm in the central part. Vacuum pump 20 m³/h. It ensures a high productivity. Vacuum machines can be equipped with gas inlet system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

Vacuum packaging machine large with two perpendicular sealing bars and stainless steel construction (AISI 304), with digital panel and volumetric electronic sensor for constant vacuum control. Using the short sealing bar can package products with lengths up to 820 mm. Instead using the long bar can be made more packages with a max lenght of 520 mm. The vacuum pump 40 m³/h. ensures a high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data.

VACUUM PACKAGING MACHINES DZ 500 T - BIG CHAMBER Bench vacuum packaging machine with front sealing bar, made ​​of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that assures a steady control of vacuum. The bigger chamber with rounded lid allows the packaging of products with max. eight of mm. 180 and the vacuum pump from 20 m3 / h. ensures high productivity. Also available DZQ with gas inlet valve (modified atmosphere). Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

TABLETOP VACUUM PACKAGING MACHINE DZ 400 T WITH INCREASED TANK Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. The tank of increased sizes with rounded lid allows the packaging of products with maximum height of 180 mm and the vacuum pump with a capacity of 20 m3/h ensure high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

TABLETOP VACUUM PACKAGING MACHINE DZ 260 T Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. This machine, with compact size, low consumption and a very short cycle time, is suitable for both the alimentary than for technical articles. The tank of modest size and the vacuum pump with a capacity of 8 m3/h. ensure high productivity.

TABLETOP VACUUM PACKAGING MACHINE DZ 400 2T WITH TWO SEALING BARS Tabletop vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

The sealer mod. DZ 800 W is a multifunctional machine for of large dimensions. Without limitation caused by the size of vacuum chamber, this horizontal vacuum packaging machine has very wide application range. Built in stainless steel. The vacuum pump 20 m³/h allows for high production. The sealing bar (or the sealing bars depending on the model chosen) with width 10 mm and closing with compressed air ensures a perfect seal on any type of material also very thick. The intake system with nozzles allows the use of any type of smooth or embossed envelope (NO BELLOW). The closure of the bars is through a dual button command (dual control security). When you have to pack flours or products that could make some dust, it is absolutely recommended to install the dust filter to avoid damaging the vacuum pump (main part of the machine) Similarly, we recommend installing the filter for liquids when you need to vacuum-pack products such as sauces or tomato purée.

VERTICAL VACUUM SEALING MACHINE FOR BAGS - ALSO WITH MAP GAS INLET The sealers mod. DZQ 600 LS/DZQ 800 LS are multifunctional machines suitable for sealing and vacuum packing large bags and sacks, also in MAP (with technical gas injection). The vacuum pump of 20 mc./h. it minimizes air intake times and the machines are equipped with valves for the injection of inert gas for packaging in a modified atmosphere. The double sealing bars with a width of 10 mm. and compressed air closure ensure perfect sealing on any type of material, even of high thickness. The bars are closed by means of a double button command (dual safety control). The sack support surface is adjustable. Thickness max. bag mm. 0.20 (0.8 total with bellows) By means of selectors and potentiometers it is possible to set the "sealing", "empty time" and "gas injection time" functions. The machine is equipped with two nozzles which, when the vacuum option is activated, descend into the bag and perform suction.

The Steam Max series has been specially designed for professional cleaning. Steam Max and Steam Max Vacuum, with a professional dry saturated steam jet and extraction cleaning function, offers a cleaning system suitable for multiple applications. Steam Max combines technology and flexibility, and is equipped with a series of accessories designed for every need.

Easy steam is a generator that works at 6 bar 165 ° C, designed for cleaning and sanitizing surfaces, equipment and environments. It differs from industrial models for its lightness and size. The accessories supplied allow a comfortable and manageable use of the machine, adapting to the different types of environment.

Easy steam is a generator that works at 6 bar 165 ° C, designed for cleaning and sanitizing surfaces, equipment and environments. It differs from industrial models for its lightness and size. The accessories supplied allow a comfortable and manageable use of the machine, adapting to the different types of environment.

Thanks to the sanitizing power of the MK500C steam generator it is possible to clean surfaces, equipment and environments in an ecological way, avoiding the use of chemicals. Its powerful steam jet is effective wherever you need deep cleaning and a high level of hygiene. Thanks to its lightness and small size, MK500C is perfect for all different types of environments.

Thanks to the sanitizing power of the MK2000 steam generator it is possible to clean surfaces, equipment and environments in an ecological way, avoiding the use of chemicals. Its powerful steam jet is effective wherever you need deep cleaning and a high level of hygiene. Thanks to its lightness and small size, MK2000 is perfect for all different types of environments.

Thanks to the sanitizing power of the MK5 steam generator it is possible to clean surfaces, equipment and environments in an ecological way, avoiding the use of chemicals. Its powerful steam jet is effective wherever you need deep cleaning and a high level of hygiene. Thanks to its lightness and small size, MK5 is perfect for all different types of environments.

Thanks to the sanitizing power of the MK4 steam generator it is possible to clean surfaces, equipment and environments in an ecological way, avoiding the use of chemicals. Its powerful steam jet is effective wherever you need deep cleaning and a high level of hygiene. Thanks to its lightness and small size, MK4 is perfect for all different types of environments.

The Steam Master Wine is a machine for cleaning and sanitizing wine and oil cellars whose equipment can be cleaned optimally and effortlessly with the action of steam. It is an ecosustainable solution for cleaning and regenerating barrels, barriques and tonneaux, cleaning and sanitizing steel tanks, bottling lines, filters and housings, fittings and pipes. two versions of machines with 10 kW (6 lt boiler) and 19.5 kW (16 lt boiler) power pump with VITON components for mains hot water> 80 ° C two steam powers with L / selector H 1.3 bar pressure for barriques and wooden barrels 6 bar at 165 ° C for steel tanks and various applications soft wheels for nonplanar floors ease of handling inside the cellar

MK27 Process is a 30kW fixed steam generator that can be installed on a production line. It offers greater ease of use than mobile generators and is designed for complex cleaning cycles. It allows the delivery of dry steam at constant pressure during prolonged use, even 24 / 24h. It can be managed automatically by the customer's production line and combined with suction systems. It is possible to position it at a considerable distance from the place of use, for better integration in the spaces made available. It is simple to use and maintain. PRODUCT FEATURES 30 kW (27 lt boiler) Steam production from 15.6 to 39 kg / h Operating pressure 6 bar Steam temperature 165 ° C Horizontal boiler positioning

MK07 Process is a 12 kW stationary steam generator that can be installed on a production line. It offers greater ease of use than mobile generators and is designed for complex cleaning cycles. It allows the delivery of dry steam at constant pressure during prolonged use, even 24 / 24h. It can be managed automatically by the customer's production line and combined with suction systems. It is possible to position it at a considerable distance from the place of use, for better integration in the spaces made available. It is simple to use and maintain. PRODUCT FEATURES 12 kW (7 lt boiler) Steam production from 15.6 to 39 kg / h Operating pressure 6 bar Steam temperature 165 ° C Positioning the boiler horizontally