Laminating machines and equipment - Import export

Reel with 8 metres of Ø 20 hose with a 3/4” fitting

Bare reel for Ø 20 hose with a 3/4” fitting (capacity: 8 m).

2304 pivot for hose-reel >10 metres 7317 pivot for hose-reel

Reel with 10 or 15 meters of hose Ø 25 with 1" connection

Reel with 10 metres of Ø 20 hose for petrol with a 1” fitting

Reel with 10 metres of Ø 20 hose with a 3/4” fitting

Bare reel for Ø 25 hose with a 1” fitting (capacity: 10 m).

Bare reel for Ø 20 hose with a 3/4” fitting (capacity: 14 m).

NBR flexible impeller pump for diesel and oils Trolley: vertical Suction kit: foot valve, cam fittings and 3 metres of hose Discharge kit: cam fittings and 3 metres of hose, spout Voltage: single-phase 230 Volts Max. TDH: 15 metres Voltage: single-phase 230 Volts Power: 0.25 kW (FiLTRO-JEP40), 0.55 kW (FiLTRO-JEP80) Orifices: 1" (JEP040), 1"1/2 (JEP080) Hose Ø: 25 millimetres (FiLTRO-JEP40), 40 millimetres (FiLTRO-JEP80) Flow rate: 2.1 m3/h (JEP040), 4.8 m3/h (JEP080)

Filter unit guaranteeing a double filtration For oil and diesel by absorbing the water and impurities present Filtration capacity of the first cartridge: 30 μ with water absorption Filtration capacity of the second cartridge: 5 μ for impurities Flexible suction hose: 3 metres with a built-in foot valve and a 3-metre discharge hose Structure: a trolley on wheels with a large diameter and retention tray

Trolley with vane pump Cartridge filter: 10 microns Suction and discharge kit: Oil: 10 to 500 cSt (mm2/s) Built-in and adjustable bypass Maximum suction lift: 5 metres Maximum temperature of the pumped liquid: 60°C Single-phase or three-phase motor Voltage: single-phase 230 (FiLTRO20, FiLTRO22) and three-phase 400 (FiLTRO21, FiLTRO23) Current: 4.6 (FiLTRO20), 2.2 (FiLTRO21), 7.8 (FiLTRO22), 5 (FiLTRO23)

Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (perbunan) (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length Trolley-mounted pump with the CHAR version

Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length

Continuous management system for the tank's level. OCIO reports the static pressure created by the height of the liquid via a tube inserted in the tank, and displays the level or volume of the liquid.

Grease dispensing gun with an oval gear meter Pressure: 550 bars

Delivery guns with built-in oil meters, with a pre-set electronic meter

Delivery guns with built-in oil meters, with electronic meter

Delivery guns with a built-in oil meter, with electronic meter

Designation: meter / flow meter Possible bodies: aluminium Seals: viton or PTFE Gears: aluminium Orifices: 1/8’’ - 4’’ Autonomous, mechanical, digital display unit with pulse generator or preselector

Materials: aluminium body - polypropylene turbine Orifices: 1" BSP M/F Max. pressure: 20 bars Digital meter: for low-viscosity fluids with a turbine-equipped measuring system Charge loss < 0.03 bar (120 l/min with diesel) Accuracy: ± 1% in the flow rate range Repeatability: 0.2% Temperature of use: from -10°C to +50°C Measuring system: calibratable turbine

Orifice: 1" M-M + adaptor 1" F-F Max. pressure: 10 bars 5-digit partial display Totalising meter: 6 digits

Materials: aluminium, polypropylene Orifices: 1’’ M-F Max. pressure: 20 bars Display: 5-digit partial Totalising meter: 6 digits Liquids: diesel

The display unit enables you to connecting remotely to a meter with a pulse generator, via a cable with a max. length of 15 metres. It can be used in 3 different ways: As a simple remote display unit. In this case, it is powered by batteries. As a remote display unit and also for transmitting pulses to another external device, such as a PLC or another display unit. Here too, it is powered by batteries. As a remote display unit and for transmitting pulses to another external receiver, such as a computer, while being powered by the latter.

Materials: aluminium - polypropylene Max. pressure: 20 bar Orifices: 1" M-F

Materials: aluminium - Acetal resin gears Max. pressure: 70 bar Orifices: 3/4'' F

Materials: aluminium - Acetal resin gears Max. pressure: 30 bars Orifices: 1" F

Materials: aluminium - Acetal resin gears Max. pressure: 70 bar (K400-I and K604-I), 20 bar (K700-I) Orifices: 1/2'' F (K400-I), 1"1/2 F (K604-I), 2" F (K700-I)

Materials: aluminium - Acetal resin gears Applications: oil Max. viscosity: 2000 mm²/s Orifices: 3/4" F Max. pressure: 70 bar

Materials: aluminium - Acetal resin gears Applications: diesel, anti-freeze Max. viscosity: 2000 mm²/s Orifices: 1" F Max. pressure: 30 bars