Laser welding machines for plastics - Import export

Laser cutting is carried out by special machines. All of the machines have the latest technological features. A fine and successful cutting technique is applied. It also provides the expected success in PVC cutting. Because the machine is strong; it applies a fast process in thick material cutting, aluminum, galvanized cuts. In particular, laser cutting, foil-coated cutting processes give more effective results than other materials. The burn trace is minimal and minimal. Our company is successful in this regard.

Mig-Mag TIG Laser Welding of carbon steel, stainless steel and aluminum.

The ALW is a comfortable, ergonomic, and compact seated workstation that offers plenty of legroom, and which can be adjusted to the height of the operator via the height-adjustable foot plate. The observation lens offers a variable viewing angle from 10° – 50°, thus ensuring comfortable working. The closed, laser-proof housing makes the ALW a laser-protected workplace that can be used in a normal production environment without additional safety precautions. The laser system is easy to operate. In addition to configuring via the display, the laser parameters can be adjusted via the patented multifunction footswitch or adapted accordingly during welding. The large doors of the ALW can be opened wide. This facilitates easy loading.

This laser system is quickly set up for the welding task. The flexible laser arm can be rotated 360 ° and offers a very high or low working position. The laser head can be rotated to the left and right and the tilt-swivel lens directs the laser beam to the point desired by the operator. The robust housing has stable aluminum handles at the corners for increased impact protection of the edges. Integrated fastening options are available here for easy lashing during transport. The gas bottle can be transported during welding with a small trailer, the 5th wheel on the laser. Generous storage areas and special brackets on the machine sides ensure that tools, welding wire and whatever else is always within reach. Operation is intuitive via a touch display. Some apps help to weld surfaces, shafts and circular welds. The 450 W fiber laser can be used for pulsed welding or for welding in CW mode.

The mobile laser welding machine ALFlak is particularly suitable for laser deposition and contour welding on large machine components, design components as well as on injection moulds and tools The sophisticated movement mechanism of the ALFlak enables you to work comfortably on large components - you can even immerse in deep, bulky shapes with the slim laser arm. With long weld seams, the ALFlak takes advantage of its large travel axes. A weld seam with a length of up to 500 mm is possible without settling - manually or according to a specified program. Welding can be done in manual mode, semi-automatic or fully programmed. The use of an automatic wire feeder or a rotary axis is also possible. It is the versatile possibilities for mobile welding that make it a very special welding system.

The laser welding systems of the AL series can be used universally. They might be integrated into existing machine structures or used with an application device for manual welding. In combination with our NC-controlled laser machining table AL-T you get a real professional solution. We offer the required performance class for every application. You can choose between 75 and 900 W. There is a wide range of processing lenses and equipment options for these laser systems. Regardless of whether you use a simple 90 ° deflection lens, the tilt-swivel lens or our circular welding lens - the laser beam always reaches the desired point on the workpiece with pinpoint accuracy. Additional equipment options are optionally available for the AL, such as: • Micro welding device for a welding spot diameter <100 µm • Rotary axis module for cylindrical welds • automatic wire feeder • Workpiece holder • camera system •…and much more

The ALM laser system is particularly suitable for welding large molds and tools, housings and machine components - wherever mobility and maneuverability are required. With the ALM you have exactly the mobility you need for welding. No matter whether in your own workshop or on site at the customer. The laser is ready for use within a few minutes. The arm can be quickly adjusted to the area to be welded and fixed in the desired working position using electro-hydraulic brakes. The operator then has the option of welding manually using a joystick or semi-automatically. One or more axes are automatically moved at a preset speed and with the joystick curves can be driven or small corrections made.

We recommend this laser welding machine especially for working on large molds. The laser arm has a range of almost 2.80 m. The highest working point is 2 m and the lowest is 80 cm. The laser system is positioned on the workpiece quickly, easily and with millimeter precision. With its highly movable arm and flexible, slim look, the ALFlak Max reaches (almost) every welding point. The areas of application of the ALFlak Max are wide-ranging: build-up and contour welding on large machine components and design components as well as on injection molding and forming tools.

The ALFlak systems offer you many options in the field of mobile laser and repair welding. With an extended range and increased travel range, welding positions in deep, complex shapes can be processed easily thanks to the long laser arm - even in deep, bulky shapes. Deposition welding with wire or powder is possible with this laser machine. Likewise, automated welding tasks. The laser device is equipped with a fiber source that guarantees high efficiency and a special beam quality. Both pulsed and CW mode can be used. The integrated performance monitoring ensures reproducible welds. This system is available with laser powers of 300/450/600 and 900 watts.

Suitable also for welding precision mechanical parts and medical technology components as well as for the manufacture of sensors and electrical components The ALS 100 is an ergonomic workplace The spacious work chamber offers a very brightly lit work area and is loaded via two side doors. The average power of 100 W enables a fast pulse sequence (up to 25 Hz) and thus fast work even at high energy settings. The homogeneous fusion of the materials results in welding results of the highest quality. The laser is used in the manufacture and repair of jewelry, in precision engineering or when welding sensors

This stable work table can be used with laser sources from 300 - 900 W, which are integrated in the work table. The modular design allows the use of various optics and focal lengths, so that you can optimally carry out your tasks. The system can be operated either manually - with our instantly responding joystick - and semi-automatically or automatically with the WINLaserNC software. When welding, workpieces are moved precisely on the three axes of movement of the work table. An axis of rotation is also available. The Z axis of the table lifts workpieces up to 450 kg. The laser and motion system are conveniently operated via the control console with an intuitive touchscreen. With the AL-TW you can weld without restricting the work area. This enables the processing of large workpieces. We support you with the implementation of the laser safety measures with our laser safety concept.

You won’t get it more flexible. The mobile welding laser AL-ARM was developed to quickly and flexibly repair offset seams, pores and penetrations in the car body. The fiber laser system can be positioned quickly and has a long range. The 3D visualization with integrated laser safety glasses enables the user to observe his welding task as well as the surroundings. The welding process is shown enlarged and the process-relevant data is also visible in the image. The handpiece, which is used for welding, is equipped with an automated wire feed and an integrated shielding gas nozzle. It weighs just 1.5 kg and is easy to position. There is no set-up time for welding.

An inexpensive entry-level model for laser welding that offers a lot of flexibility and expansion options. With this laser system you can flexibly weld small and large components. The laser power can be selected with 150 W or 200 W, ideal for welding all common metals quickly and reliably. Various work tables can be placed in front of the lifting column. Or you can weld directly on the pallet truck or pallet. This is possible because the resonator can be turned to the side or even to the back. The resonator, which sits in a slide rail, can also be pulled far forward. We also optionally supply a fixed table top for the lifting column. Operation is intuitive via a touch display. A few helpful apps e.g. for programmed circular welding or shell surface welding support the user at work. The laser system is also expandable.

With the new ALO manual welding laser, you can either work manually or with an axis of rotation for circular welding. The working chamber is easily accessible via leather curtains, but the welding itself still takes place in the shielded laser safety area. The spacious working chamber can be loaded quickly through various openings, without opening doors: a large opening at the front ensures easy access to the welding chamber. The slots on the side enable the operator to position longer components in the machining area and to weld them in a laser-safe manner. Another passage on the bottom of the working chamber allows loading from below. The laser safe leather curtain offers certified laser protection so that the laser device can be placed in any work environment. The armrest is extremely comfortable - ensuring relaxed work. A lot of attention was also paid to good ergonomics. A high-quality extraction system with filter is integrated as standard.

Laser welding is an advanced material joining technology that has found its way into a variety of industries. The process involves the use of a laser beam to melt and join materials, making it possible to precisely and effectively join parts with different properties. We provide professional laser welding services using a world-class FANUCI 4.0 PRO GenX handheld laser welding machine! This is a 4th generation laser welder and is characterized primarily by: - many times increased welding speed - excellent aesthetics of welds, requiring no further processing - no thermal deformation - deep penetration, guaranteeing the strength of the weld - excellent quality and precision of welds - working with a wide range of materials and thicknesses - joining of various materials

with 6kW fiber laser and MP Flex loading and unloading for sale in top condition. C0z3xdk3ol

At IMS, we combine the power of precision laser welding with our expertise in precision engineering. We do this to provide innovative and reliable solutions to weld microwires for the production of medical devices and medical implants.

Stainless steel system for cleanroom production with 400 W laser system Positioning the laser head using a 3-axis servo system Stainless steel lifting door with inspection window.

Stainless steel system for cleanroom production with 400 W laser system Positioning the laser head using a 3-axis servo system Stainless steel lifting door with inspection window

Laserage can precisely cut, drill, weld, scribe, and heat treat a wide variety of materials to meet any and all specification.

Advantages of Laser welding: High welding speed (1-10 m/min). Welding without edges grooving. Minimal warp distortions. Minimal heat-affected zone. Applicable for welding of wide variety of materials. Welding process versatility. Possibility of automatization. Energy and wire saving. Comfortable labor conditions, working area maintained clean. Readme! Laser welding has a special property – it forms a high-density welding joint. Porosity and other defects that are inhere in other welding methods, are absent using this technology.

Advantages of Laser welding: High welding speed (1-10 m/min). Welding without edges grooving. Minimal warp distortions. Minimal heat-affected zone. Applicable for welding of wide variety of materials. Welding process versatility. Possibility of automatization. Energy and wire saving. Comfortable labor conditions, working area maintained clean. Readme! Laser welding has a special property – it forms a high-density welding joint. Porosity and other defects that are inhere in other welding methods, are absent using this technology.

The eurolaser laser cutting machine M-1200 for acrylic glass is a compact model with a processing area of 1,330 mm x 1,230 mm (52.3" x 48.4"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off! The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The laser cutter M-800 with a processing area of 1330 x 830 mm (52.3" x 32.6") is well-prepared for all applications in the fields of laser cutting and engraving of acrylic glass (Plexiglas ®, Perspex ®). A special feature is the optional shuttle table system, which almost doubles your productivity, enabling you to hold all the aces even with a “smaller“ laser cutter. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

CO2 lasers offer impressive results in the marking of organic and inorganic materials. A very high degree of detailed accuracy and long-lasting markings are the outstanding features of this marker. The compact marking lasers from eurolaser require very little space, operate reliably and accurately and are designed for use in made-to-order items through to small series. It goes without saying that they can also be integrated into production lines.

The laser cutter system 2XL-3200 is one of the biggest in the cutter series. The processing area is 2,740 x 3,200 mm (107.8" x 126"), allowing to precisely cut and engrave large materials, for example textiles. The contactless laser cutting does not cause any bulges in the material and guarantees filigree cuts right from the beginning.

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size materials. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

The laser system size XL-1600 is the professional solution for the laser processing of textiles. Besides, the automatic conveyor system enables the possibility to process textiles directly from the roll. By doing previous cutting tests with your individual materials, we test which laser system configuration would be the most suitable for you in order to achieve optimum results.

With the laser cutting and engraving machine XL-1200 eurolaser offers the possibility to process extremely broad materials on a comparatively small system. The processing area is 2,270 mm x 1,230 mm (89.3" x 48.4"). With the optional camera recognition system which is also available for other systems the production flow can be automated, leading to an increased economy of the laser processing. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with