Layered%20board - Import export

Modern exterior doors surprise with their simple, clean and minimal design. They contribute to creating a contemporary atmosphere in the home and can adapt perfectly to modern architecture or to interiors with a more airy and simplified appearance. Door leaf - triple layered NORDIC PINE wood or exotic wood - MERANTI Door frame - Europrofile wood, triple layered 68x110 mm Crossbars and intermediate upright - Europrofile wood, triple layered 68x78 mm. Boards - double wooden panel, jointed in teeth with a thickness of 48 mm. Frame - Europrofile wood, triple layered 68x78 mm. REMMERS exterior water-based paint resistant to mechanical shocks and UV, applied in 3 starts. EPDM gasket. ROTO NT hardware with multi-point locking, anti-burglary. Gutmann aluminum threshold with thermal barrier.

The classic exterior doors are characterized by elegant lines, refined details and are made of triple-layered NORDIN PINE wood or exotic wood - MERANTI. Door frame - Europrofile wood, triple layered 68x110 mm Crossbars and intermediate upright - Europrofile wood, triple layered 68x78 mm. Boards - double wooden panel, jointed in teeth with a thickness of 48 mm. Frame - Europrofile wood, triple layered 68x78 mm. REMMERS exterior water-based paint resistant to mechanical shocks and UV, applied in 3 starts. EPDM gasket. ROTO NT hardware with multi-point locking, anti-burglary. Gutmann aluminum threshold with thermal barrier.

Glued pine boards are a special type of wooden construction boards consisting of layers of pine wood that are connected using glue. The gluing process increases the strength and stability of the wood, which makes it more resistant to changing weather conditions and mechanical loads. Glued pine boards are widely used in construction and carpentry. They are mainly used to produce beams, square timbers, sandwich panels, wooden stairs, doors, furniture and other construction elements. They are characterized by much greater durability compared to uniform wooden boards. Therefore, they are ideal for various types of structures that require the solidity of the raw material or material.

Foils and boards from PE, PET, and EVAC – smooth/embossed foils and boards from LD-PE, HD-PE – they are used in the building industry (undercutting of masonry, building insulation), or for other applications (vehicle mud-flaps, protective / separation layers in packaging, etc.). PET boards are designed for floor protection against scratching; anti-skid foil from EVAC is used as a protection against scratching and contamination in shelves and cabinets

The three-layer bonding guarantees high measurement accuracy. Each of the three layers, both the longitudinal outer layers and the diagonal inner layer, is waterproof. They are covered with a special coating of melamine resin, which prevents concrete from sticking and makes them easy to clean, and with paint, which provides protection against harsh weather conditions. Thanks to the sanded surface, the concrete structure is perfectly smooth after formwork. Pfeifer formwork panels are available in both wrought with front edge protection and unwrought versions.

All shuttering boards are coated with a special phenolic film, so that concrete does not stick to them and they are waterproof. Protecting the edges with acrylic paint further prevents moisture penetration. They provide a smooth concrete surface after formwork. Poplar Class A - a board made of the highest quality poplar, the center without inserts, with a double-pressed phenolic film Poplar Grille - slab made of very good quality poplar with double-compressed phenolic film Poplar recycled - recycled board of very good quality

OSB/3 is made from pine chips, which come primarily from nurturing forest clearcuts. In the outer layers, the chips are arranged parallel to the longer side of the board, while in the inner layers they are arranged perpendicularly. This microstructure gives it high rigidity and resistance to bending. Thanks to the use of modern technologies, the board is characterized by excellent parameters. It is easy and inexpensive to process, resistant to harsh weather conditions, and provides excellent acoustic insulation. A big plus is also the ease of its installation. It is available in two variants: with straight edges and with four-sided tongue-and-groove milled edges.

We offer wide range of innovative wall, roof or cooling layered boards containing the core made of polyisocyanurate foam (PIR). These boards consist of two linings made of steel sheets galvanized on both sides, with organic polyester lacquer coating of 25 µm and the s tructural and insulation core made of rigid, Freon-free, self-extinguishing PIR foam with great thermal insulation and fire resistance. Thermal conduction coefficient is λ = 0.022 W/m*K. PIR foams are characterized by strengthened resistance against high temperatures, they decompose at temperatures over 325ºC and their carbonization is ca. 50%. The carbonized layer protects against penetration of high temperatures through a board resulting in more efficient fire protection barrier. Diversified colours and profiles result in various possibilities for architects. ​

We offer wide range of innovative wall, roof or cooling layered boards containing the core made of polyisocyanurate foam (PIR). These boards consist of two linings made of steel sheets galvanized on both sides, with organic polyester lacquer coating of 25 µm and the s tructural and insulation core made of rigid, Freon-free, self-extinguishing PIR foam with great thermal insulation and fire resistance. Thermal conduction coefficient is λ = 0.022 W/m*K. PIR foams are characterized by strengthened resistance against high temperatures, they decompose at temperatures over 325ºC and their carbonization is ca. 50%. The carbonized layer protects against penetration of high temperatures through a board resulting in more efficient fire protection barrier. Diversified colours and profiles result in various possibilities for architects. ​

We offer wide range of innovative wall, roof or cooling layered boards containing the core made of polyisocyanurate foam (PIR). These boards consist of two linings made of steel sheets galvanized on both sides, with organic polyester lacquer coating of 25 µm and the s tructural and insulation core made of rigid, Freon-free, self-extinguishing PIR foam with great thermal insulation and fire resistance. Thermal conduction coefficient is λ = 0.022 W/m*K. PIR foams are characterized by strengthened resistance against high temperatures, they decompose at temperatures over 325ºC and their carbonization is ca. 50%. The carbonized layer protects against penetration of high temperatures through a board resulting in more efficient fire protection barrier. Diversified colours and profiles result in various possibilities for architects. ​

We offer wide range of innovative wall, roof or cooling layered boards containing the core made of polyisocyanurate foam (PIR). These boards consist of two linings made of steel sheets galvanized on both sides, with organic polyester lacquer coating of 25 µm and the s tructural and insulation core made of rigid, Freon-free, self-extinguishing PIR foam with great thermal insulation and fire resistance. Thermal conduction coefficient is λ = 0.022 W/m*K. PIR foams are characterized by strengthened resistance against high temperatures, they decompose at temperatures over 325ºC and their carbonization is ca. 50%. The carbonized layer protects against penetration of high temperatures through a board resulting in more efficient fire protection barrier. Diversified colours and profiles result in various possibilities for architects. ​

EXCOR VALENO Layer Boards offer highly versatile structural anti-corrosion packaging suitable for use as lattice box lining, box dividers, interleaving sheets or small containers. Their durability makes VALENO Layer Boards ideal for multiple or long-term use. Depending on operational conditions, their depot-like nature means that EXCOR VALENO Layer Boards can diffuse VCI for up to five years, offering secure, long-term corrosion protection.

Papers and carrier boards are combined in the batch laying section. In the simplest of cases, a batch that is ready for pressing consists of a sheet of decorative paper as the base layer, a carrier board and a sheet of decorative paper as the top layer. It may in certain circumstances be necessary to use of several types of paper. Features, function Papers soaked in resin are supplied to the plant in sheets lying on pallets. A suction bar separates the papers from the stack and pulls them on to a laying conveyor. A suction carriage delivers the board made from wood-based material. The laying conveyor conveys the batch from laying station to laying station / conveys the assembled batch to the facility core. The batch is statically charged in order to secure the papers on the carrier board for continued transport. Advantages The individual layout of the batch layer is based on coordinated standard modules.

The Double Stream Mill, series PSKM is used for the fine preparation of precut wood chips and annual plants such as bagasse, miscantus, cotton stalks, hemp stalks, corn straw and rice straw. The fine flakes produced are characterized by their low percentage of dust and coarse particles. The areas in which the end material is used are diverse. It is used for energy generation, as insulation material, the reinforcement of building components and as raw material for the production of fine surface layers of particle boards. Characteristics, Function Compact and sturdy, designed for continuous operation Bearing- and drive system easily exchangeable as a complete unit A slide to remove the grinding ring is supplied as standard. Dismantling of the impeller is not necessary Material feeding via vibratory feeder and a feed chute designed as a gravity separator Even distribution of the material in the grinding chamber Size reduction is performed by repeated impact onto the impeller...

1, Turnkey solution for Printed Circuit Board Assembly in Uninterrupted Power Supplies (UPS) System. 2, PCB Assembly, PCB fabrication / PCB layout, PCB Reversing. 3, Full Bespoke PCBA/ OEM/ EMS(Electronics Manufacturing Services). 4, SMT&DIP&PTH&BGA. 5, Components Sourcing. 6, Quick PCBA prototype. 7, X-ray test, ICT and Functional Circuit Test. 8, Sample and small batch order are accepted. PCBA Service Customer offers: Gerber file, PCB Specification, BOM and Assembly Drawing. Full-turnkey PCBA: 1-30Layers PCB, Components Sourcing, SMT, PCBA testing, PCBA Aging test, PCBA Packing and PCBA Shipping. PCBA Quality Assurance 1, Certifications: UL, SGS, TUV, BV, ROHS, ISO9001: 2008, TS16949: 2008 2, 7 lines dust-proof SMT lines and DIP lines. 3, All line works wear anti-static and dust-proof clothing. 4, All operators should pass strictly training before they start work.

The four-layer PCB board is pressed on the basis of the double-sided PCB board (two-layer PCB board), and PP and copper foil are added to both sides of the double-sided PCB board when pressed, and then pressed into a 4 layers PCB board after high temperature and high pressure. To put it simply, the four-layer PCB board has an inner layer. In terms of process, some circuits are etched onto the inner layer and then pressed.

Frame modular formwork MSK is light panel formwork, main element has the following dimensions 100 cm x 150 cm. Mounting element height is 7.5 cm. Bearing structure is a rack screen of strip iron with dimensions of separate cells of 25 x 25 cm. 11-layered plywood board 15 mm thick covered with laminated film is inserted into the structure of steel frames. • Foundation formwork • Wall formwork • Lift well formwork • Wall formwork (compound node points) • Column formwork • Bent surface formwork Modular formwork MSK has ideal gradation of all height ranges, from foundation to necessary wall heights. Base element width is 100 cm. Due to great width range of finishing (fitting) elements, for example 75, 60, 50, 45, 40, 35, 30 and 25 cm and presence of compensating element of 5 cm, formwork can be adapted to any monolith project. At construction sites where there is no crane formwork installation can be executed manually due to light weight of elements.

The cover has become much more resistant to high temperatures with the 100% cotton extra-thick woven fabric used for the top layer of the two-layer corded ironing board cover. In contrast, the 4 mm sponge bottom layer laminated to the fabric provides a smooth ironing area. The most prominent feature that distinguishes the Metalic series is the aluminum coating (Teflon coating) it is equipped with. Thanks to the aluminum coating, the ironing board cover can reflect back the steam from the iron, thus enhancing the ironing speed and performance. As per the order, Metalic Series ironing board cloth is produced to be washed at low temperatures (30 degrees) or be suitable for dry cleaning. Upon placing the ironing board cloth on the table, the polyester threads inside the binding enclosing the cloth are adjusted according to the size of the ironing board, and the fabric is fixed using the stoppers located at the tips.