Led lighting - Import export

Superbright bipolar red, yellow and green LEDs assemblies with resitor for 120VAC or 240VAC. Plastic housing or rugged screw on metal housing-all available with IP66 sealing. Custom wire leads,plug, connectors options available by verco electromechanical components. mounting holes 7,93 mm or 12,70 mm

Verco/lighting specialist in offering a wide range of industrial and standart lighting devices. Ideal for offices,laboratories,workstations,doctor consutancies,hospitals.

Venez vous informez sur nos nouveaux produit Led 120V / 240VAC Panel Mount Led verco . http://www.verco.be/medias/produits/fichier/MP-Led-2013-NeW-!.pdf

Maximum energy savings with highly efficient solutions from Chatron CHT-DIM LED The industrial LED Chatron CHT-DIM allow maximum energy savings due to their high efficiency related to LEDs, drives and intelligent dimming system. The efficiency of chatron leds is 150 lumens / W, but this is only the beginning of the difference in maximizing efficiency. Another very important factor that distinguishes Chatron’s Industrial LEDs from all others on the market is the intelligent light probe incorporated in all LEDs, varying their power and therefore their energy savings, depending on the reading of the ambient light at every moment.

At Camaleón Rental we offer the rental of all lighting equipment related to the world of cinema, advertising, television and events. We have HMI lighting material, Arrimax 18/12 and M Series. M90, M40, M18, M8. The M series lighting kits have Flicker Free Ballasts up to 1000 Hz which are ideal for use in high speed recordings, we also have the latest in the market from the most relevant brands such as Arri and Kino flo led , Dedolight, Astera or Aladdin. Among others we highlight the Arri Skypanel 360C, Skypanel 120C, L Series, Orbiter, Astera Helios and Titan devices. We have to offer a wide series of Fresnel lighting sources, generator sets, portable power systems and everything that is necessary for a shoot.

Runs with 12 volts. There is no risk of electrocuting. • Complete standalone piece production with 12 volt supply. PIXEL applications included. • It doesnt rust because the screw is not used in montage. It is easily mounted even on sheathing. • Nonflammable, does not catch fire, does not radiate, does not heat and crack. • Resistant to chemicals like acids and bases, oil, thinner, bleach, and so on.. • Uniform color feature (LED dots not visible). Colors (Blue, Red, Green, Daylight, Amber) • Dimmable (Light level can be increased, reduced) • In water (100% performance in sea, pool and ponds). Does not get seaweed. • Not affected by climate conditions. It runs smoothly in 30 ‘C. Instant endurance is +300’ C • Upon request, we are making production with corporate brand, logo and so on.

Based on years of 3D measurement experience and market demand, SHINING 3D innovatively integrates blue LED light and blue laser into EinScan HX handheld 3D scanner. The hybrid laser and LED light sources make EinScan HX compatible with a wider range of object sizes, meeting multiple needs of users. High efficiency and reliable result give EinScan HX more application possibilities.

We want to give all our clients the opportunity to use an attractive and expressive way to present their logo. Regardless of the time of day, weather conditions and location - by choosing our illuminated letters, you can be sure that the sign display will be delightful and eye-catching. We also make sure that the projects are tailored to the individual expectations of our clients, which is best documented by completed projects. The examples presented below will outline our capabilities and allow you to see how elegant and at the same time distinctive from the competition advertising is the use of block letters. We are convinced that not only the aesthetic values ​​of our spatial models (enriched with LED lighting) will prove convincing, but their indisputable advantage will also be their functionality, efficiency and savings they bring.

Fairy Garden Statue Solar Garden Angel Figurine Outdoor Decoration Waterproof Resin Garden Sculpture for Patio Yard Lawn Porch Art Decoration

An attractive, efficient and quality design The PRM7 series projector has been designed to obtain a superior thermal performance, the dimensions of the PCB gives you the best uniformityand low glare, with a large operating margin between temperature environment and chip connection (Tj), all with IP 66 protection. The implementation of 130lm / W SMD LED technology through the use of specialized lenses, provides superior light efficiency. NF2L757DR Japanese technology of high efficiency and sustainability. The angle of inclination can be adjusted with great precision, it is sufficient to slightly loosen the central bolt and change the inclination with an interval of ± 90 °, it is not necessary to remove the bolt because it offers a high degree of safety during installation.

The projector series PRE is an economical projector with an ultra-thin design and superior thermal performance. This projector is the solution to all your outdoor lighting needs thanks to its IP66 and IK08 protections. Our innovative optics system will serve to cover any area you want to illuminate very evenly. The implementation of SMD LED technology through the use of lenses Specialized provide superior light efficiency. NF2W757GRT-V3 Japanese technology of high efficiency and durability. The new LED projector serie PRE has been specially designed to ensure excellent performance on sports courts and advertising spaces. With more industrial design, the PRE Series LED projector maintains the same levels of safety, durability and warranty as PRM Series LED projectors, at a lower cost.

PLI7 series projector, with a modular design for thermal performance superior and controlled. Large PCB with dissipation envelope throughout the contact surface. Optical group separated and isolated from the module's drivers, with stainless steel screws and quality waterproof connections. The implementation of 1301m / W SMD LED t echnology with the use of Specialized lenses is suitable for long distances. NF2L757DR Japanese technology of high power and durable. The selection of the ideal product is essential to obtain the best financial result, and excellent lighting comfort in the medium and long term.

Controllable by means of DALI protocol The industrial high bay CAL-D1 is a dimerizable LED with superior thermal management, with a thermodynamic design and PCB that gives it the best uniformity and lowest temperature increase, providing a large margin of safety with respect to the junction temperature of the LED chip (Tj). Your MEAN WELL series HBG-DA driver can be controlled by DALI protocol. The high bay has the data bus for this connection. The selection of the ideal product is essential to obtain the best financial result, and excellent lighting comfort in the medium and long term. Own laboratory of electrical security: Tests like the EN55015 and EN61004-5, additional quality control in the supply of the electronic components implemented next to the LED chip.

Minimalist design, efficient and clean The LDS series LED linear high bay is the perfect solution to form a efficient linkable linear lighting system in supermarkets, large or medium stores, etc. Through which we will obtain a outstanding performance. The LED modules, the power line and control is integrated in the luminaire, facilitating its installation. Made of aluminum alloy. Implements SMD LED technology by using specialized lenses, they allow you to fully illuminate the aisle and shelves, only shelves on both sides or on one side only. NF2L757DR japanese technology of high efficiency and durability. In the LDS LED linear luminaire the LED modules, the power line and the control are integrated in the luminaire, facilitating its installation.

High efficiency and intensity for floriculture AGRO-L radiates little heat, allows to bring it closer to the sheet maximizing production. The P18 spectrum is used in floriculture, produces rapid germination and boosts vegetative growth and flow. It contains some green, beneficial for the quality of the flowers. The P11 spectrum maximizes red and blue lights by improving the absorption of chlorophyll A and B with a balance of green wavelengths that allows a much deeper penetration of the canopy. Improves photosynthesis at all stages, from propagation to flowering. AGRO-L is a linear LED high bay that gives us powerful lighting under control, intended for commercial cultivation of greenhouse flowers. Its high efficiency of up to 2.3μmol/J allows its proximity to the leaves and flowers without damaging them.

The best complement for vertical horticulture It can illuminate two rows of plants at the same time and does not damage the green leaves. It is used in tomato, cucumber, pepper, ect. and THC producing plants. Variable spectrum luminaire, feeding its line (L2) reinforces 730nm, exciting the far-infrared photo-receiver (Pfr) of the phytochrome, which stimulates the flowering process. AGRO-V will help growers to obtain crops of tomatoes, peppers, cucumbers, vines and other THC-producing crops throughout the year, with more consistent and high quality productions AGRO-V has two power lines L1 (wider spectrum) and L2 (730nm) that excites the photo receivers (Pfr) of far infrared phytochrome in photomorphogen lighting applications. It promotes the flowering and production of sugars, and simulates the sunset and spectrum of the seasonal period in which the days are shortened.

With cast aluminum body, powder coating and spray lacquer electrostatic anti-aging. This anodized aluminum reflector is protected by a tempered glass which gives it great resistance to corrosion. This luminaire is perfectly designed to be installed vertically and horizontally in 60mm diameter rods. The Inventronics driver offers high reliability to medium and long term, remote management possible. The Solbis® LED road luminaire offers high-performance light efficiency of up to 135lm / W thanks to the Nichia SMD LED technology of its lenses. All lenses certify an IK08 protection, providing the Solbis® LED street light with great safety and robustness throughout the whole.

Luminaire with a real efficiency of 130lm / W and a color rendering Ra> 70, with optical group of tempered glass IK08. Smooth body that prevents the accumulation of dirt with gray anodized paint. Installation in both horizontal and vertical insertion rods, incorporates a level instrument for its correct adjustment with respect to the horizontal plane, being able to vary its inclination. With 6KV electrical protection between phase - neutral and 12KV between line-ground. Luminaire with integrated timer that allows the programming of five levels of light flow, according to the time slot of the luminaires. The opening mechanism facilitates access to the inside of the appliance, without having to bear any load. As an upper opening mechanism, it reduces the risk of the light unit being lifted during installation or maintenance.

Applications Pedestrian areas, squares and gardens. For heights between 3 and 6 meters.

Professional LED inspection and work lamp with adjustable ABS housing, 3 powerful magnets and hooks. Ideal tool in the garage, the workshop or in any dark or under-illuminated space High light intensity of 300 lumens at the side UV lamp on the top: for detecting coolant leaks, and stains on seats and carpet. Great autonomy: up to 7 hours non-stop

The brightness of the 2 rows of lights can be individually controlled for each of the 2 rows and there can easily be switched between the 2 types of light. The flat, narrow shape is ideal for illuminating hard-to-reach areas. Large autonomy up to 6 hours. Equipped with 2 hooks, a powerful magnet on top and a powerful magnet integrated into the adjustable foot.

We produce aluminium profiles for lighting industry according to customer drawings under EN755-1,2,9 using aluminium alloys (6060 and 6063). Profiles can be powder coated in any RAL colours and anodized.

Main features LED chrome plastic Power 5 W IP44 protection Delivery times Mainland 1 to 2 weeks Madeira and Azores 2 to 3 weeks Foreign 2 to 3 weeks Guarantee 2 years Price with VAT.

Outdoor LED Street Light

STRIP LIGHTING LED LED Strip Lighting is the most cost-effective solution for all kind of projects: hospitality, commercial, residential and retail. It allows lighting designers to be creative: from a glow within a furniture to a more intricated design, we always have the best LED strip light that suits your project. All our LED strip lighting are designed in UK, and we always assist architects and designers on finding the right product that matches the project’s budget and specifications. Thanks to our Lighting Engineers, we help all our clients during the decision process, to find the most cost-effective solution with our typical high level standards. Our LED lighting can be used to create atmosphere, for a mood lighting, to enhance a room or space or as a feature lighting recessed into a wall or ceiling.

The product is available on an individual order. As part of an individual order, our engineers can develop unique solutions for installing lighting in any product from our catalog. The lighting can be connected to either a permanent power source or solar panels. The project is the installation of lighting at the objects of the IRF is calculated individually. To send a request, place an Individual order.

NGA’s Fusion Flex linear LED solutions are a result of over 12 years in constant development as we strive to be the very best in our field. Well renowned by some of the industries most respected lighting designers, our range of lighting has been used in some of the most prestigious offices, palaces, 5* hotel chains, residences and entertainment venues around the World. As active members of the UK’s Lighting Industry Association, NGA has invested heavily in testing and ISO quality control procedures giving our clients peace of mind that they are getting the best quality available. For 2020 we are pleased to introduce our highly efficient range of linear LED that produces >95CRI, is consistent to within 2 MacAdam steps and is up to 40% more efficient than previously available solutions. Designed, tested and produced in to luminaires in the UK, our highly skilled installation team provide a plug and play service to avoid any installation quality issues on site.

Period of use: 100.000 hours Low energy consumption Easy installation Low voltage power supply available Stable light, not affected by voltage variations Housing made of extruded aluminum, for proper thermal management The light fixture consists of: 1 pc. clear diffuser, poly-carbonate or glass (for high temperatures and resistance to chemical environments) 1 pc. Aluminum encasement Optical assembly Fixing system The interior houses an optical block made up an aluminum support and LED(s) All external elements are powder-coated in Airport Yellow – RAL 1004 Electrical Characteristics Electrical insulation class: I Power supply (XXX): 230-110V AC, 12-24V or 48V DC