Liquid film probes - detectors - Import export

The level sensors of the 46X-Ei series combine a ceramic measuring cell for very low measuring ranges on the mbar scale with microprocessor electronics for compensating for temperature dependence and nonlinearity. In addition to the digital RS485 interface, the sensors also have a rangeable analog output. Intrinsically safe – suitable for use in explosive atmospheres.

In the high-precision level pressure transmitters of the 36XW-Ei series, the temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal. Extended lightning protection is also available as an option. Intrinsically safe – suitable for use in explosive atmospheres.

The level sensors of the 26Y-Ei series are budget-friendly, but still offer high accuracy and excellent long-term stability. They are available in versions for absolute or relative pressure. With a start-up time of just 5 ms, the Y line is ideally suited to data logger applications. Intrinsically safe – suitable for use in explosive atmospheres.

With a small diameter of just 16 mm, these level sensors are ideally suited to use in small spaces, such as narrow monitoring pipes. The measurement results can be read out via the 4...20 mA output or the RS485 interface. Extended lightning protection is integrated as standard.

The high-precision level sensors of the 36XiW series measure with ultra-high accuracy and resolution. Temperature dependence and nonlinearity are precisely compensated for in the microprocessor by means of a mathematical model. They can be supplied with either an RS485 or SDI-12 interface. In addition to the pressure sensor for the level measurement, it is also possible to integrate a Pt1000 that is calibrated to ±0,1 °C from 0...50 °C. Extended lightning protection comes as standard with the SDI-12 interface and is available as an option for the RS485 interface.

The level sensors of the 46X series combine a ceramic measuring cell for very low measuring ranges on the mbar scale with microprocessor electronics for compensating for temperature dependence and nonlinearity. In addition to the digital RS485 interface, the sensors also have a rangeable analog output.

The 36KyX series was specially developed for brackish water and sewage applications. It is equipped with a non-fouling Kynar separating diaphragm, which combines the anti-adhesion properties of PTFE with outstanding hardness and abrasion resistance. This level sensors design can be readily installed in harsh environments, eliminating the need for bulky, costly protective equipment. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal.

The level sensors of the 26Y series are budget-friendly, but still offer high accuracy and excellent long-term stability. They are available in versions for absolute or relative pressure. With a start-up time of just 5 ms, the Y line is ideally suited to data logger applications.

In the high-precision level sensors of the 36XW series, the temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal. Extended lightning protection is also available as an option.

Belt width 500-1400 mm (20” to 55”)

Probe for easy sampling from closed containers or packaging Ideal for the analysis of gases in sample bags, for example

For measuring the gas concentration in shafts or under the Ceiling. Extremely light and robust. With special, protected quick change option for the hose, which can only be obtained from Schütz Messtechnik.

For measuring the gas concentration in shafts or under the Ceiling. Extremely light and robust. With special, protected quick change option for the hose, which can only be obtained from Schütz Messtechnik.

For measuring gas concentration in shafts or just below the ceiling.

The accessibility of the lines for pressure tests in industrial companies is often a major problem, but no longer with this probe!

The accessibility of the lines for pressure tests in industrial companies is often a major problem, but no longer with this probe!

Special probe for the location of leaks in construction trenches. Carrying out concentration measurements horizontally in open construction trenches. For the search of gas pipelines and the direction in which it lays. The penetration of water into the measuring device must be prevented in such measurements, so a water separator is installed.

Weight-optimized bell probe with carbon fiber rod and integrated filter technology. Extremely light, yet very robust construction for fatigue-free work. The bell probe has a dust and a water filter integrated in the lower section and is used for unpaved surfaces. When the carpet probe can no longer be used, the bell probe is used for above-ground control or for concentration measurement in the ppm range. Both probes are often carried along; the CFRP mini bell probe is ideal for this. The Bell Probe CFRP Mini is particularly suitable for carrying along with the carpet probe during pipeline network inspections. The Bell Probe Mini is clicked into the rod of the carpet probe. Together with the Carpet Probe CFRP, the combination of both probes weighs less than a metal constructed probe, with the same or higher strength.

Weight-optimized bell probe with steel rod and integrated filter technology. This probe is included in the complete set. Extremely light, yet very robust construction for fatigue-free work. The bell probe has a dust and a water filter integrated in the lower section and is used for unpaved surfaces. When the carpet probe can no longer be used, the bell probe is used for above-ground control or for concentration measurement in the ppm range. Both probes are often carried along; the CFRP mini bell probe is ideal for this. All bell and borehole probes are available with a demountable rod to fit in the carrying case - complete set with borehole probe CFRP, bell probe CFRP and foldable carpet probe CFRP weight-optimized.

Weight-optimized bell probe with steel rod and integrated filter technology. Extremely light, yet very robust construction for fatigue-free work. The bell probe has a dust and a water filter integrated in the lower section and is used for unpaved surfaces. When the carpet probe can no longer be used, the bell probe is used for above-ground control or for concentration measurement in the ppm range. Both probes are often carried along; the CFRP mini bell probe is ideal for this. All bell and borehole probes are available with a demountable rod to fit in the carrying case - complete set with borehole probe CFRP, bell probe CFRP and foldable carpet probe CFRP weight-optimized.

Weight-optimized bell probe with carbon fiber rod and integrated filter technology. Extremely light, yet very robust construction for fatigue-free work. The bell probe has a dust and a water filter integrated in the lower section and is used for unpaved surfaces. When the carpet probe can no longer be used, the bell probe is used for above-ground control or for concentration measurement in the ppm range. Both probes are often carried along; the CFRP mini bell probe is ideal for this. All bell and borehole probes are available with a demountable rod to fit in the carrying case - complete set with borehole probe CFRP, bell probe CFRP and foldable carpet probe CFRP weight-optimized.

For in-depth measurements in boreholes. Complete with water separator, suction hose, sintered filter and coupling. The measuring tip comes closer to the leak point or the gas mains and kann thus deliver better results.

Weight-optimized borehole probe with demountable carbon fiber rod and integrated filter technology. (Dust and water filter) Extremely light, yet very rugged construction for fatigue-free work. The borehole probe has a sight glass, dust filter and water filter integrated in the lower part. The dmountable borehole probe CFRP is available in a carrying case complete set with borehole probe CFRP, bell probe CFRP and weight-optimized foldable carpet probe CFRP made of carbon fiber.

Borehole probe with sight glass, dust filter and water filter for concentration measurement in boreholes. The bore hole is sealed by the flexible cone and no external air is sucked in. With a max. depth of 30 cm the borehole can be used without any problems.

Borehole probe with sight glass, dust filter and water filter for concentration measurement in boreholes. Very robust construction that has proven itself over many years. Borehole probe with sight glass, dust filter and water filter for concentration measurement in boreholes. All bell and borehole probes are available with a demountable rod to fit in the carrying case - complete set with borehole probe CFRP, bell probe CFRP and foldable carpet probe CFRP weight-optimized.

Easy to guide push along carpet probe with surface filter, hose filter, hose and plug-in coupling for the inspection of pipe runs, to absorb gas traces during the mains survey with the aspiration method. Very lightweight - for daily use without fatigue. The wide border of the flexible carpet probe clings to surface unevenness of the street, largely preventing the entrance of interfering gases (exhaust fumes, ?) during the survey work.

Easy-to-use, mobile carpet probe with surface grille, bag filter, hose and plug-in coupling for surveying pipelines, and for recording gas traces after checking the gas pipeline network with the suction process. Very light, therefore fatigue-free and easy to use in daily tasks. The wide edge of the flexible carpet probe conforms well to unevenness on the pavement surface and largely prevents the ingress of interfering gases (exhaust gases) during the inspection process.

Easy-to-use, mobile carpet probe with surface grille, bag filter, hose and plug-in coupling for surveying pipelines, and for recording gas traces after checking the gas pipeline network with the suction process. Very light, therefore fatigue-free and easy to use in daily tasks. The wide edge of the flexible carpet probe conforms well to unevenness on the pavement surface and largely prevents the ingress of interfering gases (exhaust gases) during the inspection process.

Easy-to-use, mobile carpet probe with surface plate, bag filter, hose and plug-in coupling for surveying pipelines, and for recording gas traces after checking the gas pipeline network with the suction process. Very light, therefore fatigue-free and easy to use in daily tasks. The wide edge of the flexible carpet probe conforms well to unevenness on the pavement surface and largely prevents the ingress of interfering gases (exhaust gases) during the inspection process.