Lubricating oil - Import export

- Sampling must be done quickly and safely according to the prescribed procedure at proper location on site. - The sampling method can be classified into two categories. - Oil extraction into the sample bottle by integrated vacuum pump driven by electric motor - Convenient and easy sampling compared to manual type - Robust. One-handed grip - Adopted clamping spec for clean vacuum standard sample bottles - One-touch operating switch

to standard SAE 794

Fully synthetic, adhesive lubricant for open gear drives, toothed wheels, chains, guideways and wire ropes. The highly-viscous and high-pressure resistant oil remains fluid even at low temperatures and leaves no solid residues

Base oil SN-80 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-80 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-80 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

BS "Bright Stock" / KS-19p oil is a high-viscosity cylinder oil, that refers to high-viscosity base oils obtained by distillation under atmospheric pressure and vacuum distillation, extraction and dewaxing of solvents from residual oils – as well as at the end of hydrotreating. The name "Bright Stock" comes from a method of producing a high viscosity cylinder oil of a bright color (Bright) by mixing naphtha with a dark colored cylinder oil, the mixture is left until winter, the wax ingredients are extracted from it, and then the naphtha liquid is distilled. BS "Bright Stock" oil is contained in gear oils, marine diesel engine oils, cylinder oils and other oils with a high viscosity index.

Polydimethylsiloxane / linear non-reactive polydimethylsiloxane (PDMS) is one of the high-performance polymers, with unique physical and chemical properties like flexible, thermo-tolerant, resistant to oxidation, ease of fabrication, tunable hardness, and other desirable properties.

The rotation of high speed shaft should not be more than 1500 rpm; The circumferential velocity of gear tranmission should not be more than 20 m/sec; The temperature of work environment should be -40-45°C. If it below 0°C, before start, the lubricating oil should be pre-heated to above 0°C. This speed reducer can be run at clockwise and counterclockwise direction.

New concept! Maintenancefree track surface! Track surface doesn't require lubrication over long term use! IKO CLube Unit for Cam Followers is a lubrication part to mount into Cam Followers. Regular lubrication is not required as lubrication oil is supplied onto the outside diameter surface of the cam follower outer ring and track surface. Long term maintenance free track surface achieved.

These Roller Followers are lubricated with CLube, a thermosetting solidtype lubricant which fills the inner space of the bearing. CLube is lubricant made of a lot of lubrication oil and fine particles of superhigh molecular polyolefin that are solidified by heat treatment. As the bearing rotates, the lubricating oil oozes out onto the raceway surface in proper quantities, maintaining the lubrication performance for a long period of time.

These Cam Followers are lubricated with CLube, a thermosetting solidtype lubricant which fills the inner space of the bearing. CLube lubricant is made from lubrication oil and fine particles of superhigh molecular polyolefin that are solidified by heating. As the bearing rotates, the lubricant oozes out onto the raceway surface in proper quantities, maintaining the lubrication performance for a long period of time. Since the lubrication oil inside CLube maintains the lubrication performance for a long time, it reduces annoying lubricating management work.

Methyl Isobutyl Carbinol or 4 – Methyl – 2 – Pentanol is a kind of chemical compound which is organic and is derived from acetone. In the mining industry, MIBC is popularly used as a frothing agent during the flotation processes of different minerals and also when producing additives of lubricant oils. Compared to other frothing agents, MIBC has a great selectivity and fast kinetics in the flotation process. It produces froths with are dry yet easy to break which increases the efficiency and yield of the mineral.

Methyl Isobutyl Carbinol or 4 – Methyl – 2 – Pentanol is a kind of chemical compound which is organic and is derived from acetone. In the mining industry, MIBC is popularly used as a frothing agent during the flotation processes of different minerals and also when producing additives of lubricant oils. Compared to other frothing agents, MIBC has a great selectivity and fast kinetics in the flotation process. It produces froths with are dry yet easy to break which increases the efficiency and yield of the mineral.

Separable Roller Followers are assembled by combining an outer ring, inner ring and needle roller cage. They can be separated from one another, so handling is easy. Oil lubrication is also easy, making them suitable for highspeed rotations. Two types are available without inner ring RNAST and with inner ring NAST. The inner ring type includes open, shield, and sealed types.

It is mainly used to replace R22 and R502 refrigerants in low-temperature refrigeration equipment; because R290 refrigerant is flammable, it is usually only used in low-temperature refrigeration equipment with a small amount of liquid, or as a component of low-temperature mixed refrigerant; R290 is compatible with traditional refrigeration oil. High-purity R290 is used as a temperature-sensing working fluid; premium and first-grade R290 can be used as a refrigerant to replace R22, R502, compatible with the original system and lubricating oil, and used for central air conditioning, heat pump air conditioning, household air conditioning and other small refrigeration equipment . R290 is a hydrocarbon refrigerant; it has no damage to the ozone layer and has a very small greenhouse effect.

All dies, sold separately. Specially designed frame allows the operator to easily attach fasteners to the unconventional shapes of purses, shoes and more. Requires an air compressor that can put out 150 PSI. Perfect for touch ups. MS 1 Deep Frame Attaching Machine Please note that the price on the machine is unbeatable and considered a great catch because the machine is capable of applying almost everything. it’s absolutely a great investment for all types of business from starters to professionals’ and from moderate to mass production. Additional to the grommets this machine also attaches spring snaps, ring snaps, bebetto snaps, jean rivets, and jean buttons of all styles and sizes we carry. MS 1 works with an air compressor. The machine is delivered already mantled; so once you receive plug it in and attach the air compressor and start attaching. The machine requires the use air lubrication oil and the 150 PSI is required for air pressure

Sintered bronze sliding bearing Sintered bronze (Cu-Sn-alloy) DIN 1850 / ISO 2795 Maintentance-free Oil-soaked Pre-finished Solid lubricant (for example MoS2) on request Sintered iron / sintered steel on request

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors Also available as spray version OKS 671

Improves the run-in lubrication of new or overhauled machines and increases the load-carrying capacity Improves the lubricating properties of the oil under high loads and at high temperatures Reduces operating noises and wear Advantages and benefits Forms a pressure-resistant layer with high lubricating effectiveness Increase in the load-bearing share Reduction in the specific surface loading Lower thermal loading of the lubricant Considerably extended service lifeShake or stir well before use. Depending on loading, add 2-3% to engine oils and 3-5% to machine- and gear oils. Instructions of the machine manufacturer have to be observed. Mixing will occur in operation. Mix with appropriate lubricants only. Not suitable with water-based lubricants and polyglycol oils. Especially at older machines and machines normally used with unalloyed oils, the compatibility of OKS 30 with the installed gaskets has to be proved before application.

Fulltech 10W-60, is a synthetic engine oil based on innovative engine oil technology. The modern technology additive technology provides ultra high performance under extreme driving and road conditions. Its special formula offers esay cold starting, highly durable lubricating film and low oil consumption.

DANA LUBES based in UAE is a leading manufacturer of high quality Industrial Hydraulic Lubricants & Oils. Hydraulic Oil ISO 46 gives wide temperature range performance. Their exceptional anti-wear, lubricity and film strength characteristics assure performance in hydraulic and circulation systems operating under moderate to severe conditions. The ready biodegradability and virtually non-toxic nature of this products makes it an excellent choice where leakage or spillage could enter environmentally sensitive areas. The inadvertent leakage of spillage of this product in environmentally sensitive areas could result in easily clean up and lower remediation costs.

Base Oil SN 900 is defined as a base oil at the upper end of the specifications for Grade I base oils. It is used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base oil SN 900 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

Base oil SN 600 is defined as a base oil at the upper end of the specifications for Grade I base oils. It is generally used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : SN 600 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base Oil SN 500 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

Base Oil SN 100 SN100 is a light base oil with its parameters being at the low end for lubricant stock. It is a Group I base oil made by further processing vacuum distillates of specific crude oil fractions. It is mostly used in lubricant and lubricant additives production. Applications : Base oil SN 100 works as a base stock for several industrial lubricants General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌