Benches- park - Import export

ABES Lean-On-Bench 108 is a back to top widening lean-on element with a curved profile. The upper half is equipped with a wooden covering. Mounting Screw-on or concrete embedment. Finish – Powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. – Can also be supplied in cast aluminium, if desired. – Lean-on surface made of wood. – The bench is delivered unassembled. Order Information Art. N° 108.101 (screw-on) Art. N° 108.151 (fixed mounting)

ABES Bench 103 is a park bench steel tubes made of bent and adjusted to miter with two diagonally opposite back rests. The steel frame is designed to accommodate seating supports and back rests made of wood. Mounting Screw-on or free standing. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats made from hardwood. – The following changes are possible for an extra price: colour and wooden surface. ABES Bench 103 overview: Park bench with back rest – Feet: Stainless steel 1.4301 pickled and smoothed or Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats: Hardwood. – Measurements (L x H x W in mm): 2380 x 730 x 835. – Delivered unassembled.

ABES Bench 104 is a cast aluminium bench system without back rest, consisting of four basic units. The system has a modular construction: – A straight seating unit. – A seating unit bent at a 45° angle. – A seating unit bent at a 90° angle. – Base with inward-facing legs, joined to a plate at the lower end, with the upper end of the plate supporting the seating units. Mounting Screw-on or free standing. Finish – Powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge.

ABES Bench 146-2 is a park bench with back rest, with armrests and wood slatting, consisting of two cast aluminium frames, each with two legs, an inwardly inclined panel and supports for the seat. The back rest and armrests merge with one another, forming an almost 90° angle to one another. Mounting Screw-on. Finish – Cast aluminium, powder coating in standard RAL colours or DB 703. – Seating slats made from hardwood. – The following changes are possible for an extra price: colour, length and wooden surface. ABES Bench 146-2 overview: Park bench with back rest. – Base: Cast aluminium, powder coating in standard RAL colours or DB 703. – Seating slats: Hardwood. – Measurements (W x H x D in mm): 2100 x 877 x 588. – Seat width: 2000 mm, Seat height: 447 mm. – Bench is delivered unassembled.

ABES Bench 143-2 is a park bench with back rest, consisting of two perpendicular side parts made from steel profiles, which hold five wooden slats. Back rest consisting of three wooden slats connected to steel girders. Mounting For screw fixing (at +/- 0 mm) or concrete embedment (floor recess 400 mm). Finish – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats made from hardwood. – The following changes are possible for an extra price: colour, length and wooden surface. ABES Bench 143-2 overview: Park bench with back rest – Base: Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats/Back rest: Hardwood. – Measurements (W x H above ground x D in mm): 610/1890/1590 x 453/823 x 444/ 544. – Bench is delivered unassembled.

ABES Bench 107-2 is a park bench with back rest, consisting of two U-shaped steel tube frames including mounting options for a seating slat made from several steel tube profiles. Back rest connected to the rear tube of the seating slat on sickle-shaped suspensions. Mounting Screw-on. Finish – Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. ABES Bench 107-2 overview: Park bench with back rest – Base: Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 or Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge – Measurments (L x H x D in mm): 1585 x 840 x 522. – Bench is delivered unassembled.

ABES Bench 100 is a park bench with back rest made from 140 mm wide steel profiles to hold the wooden slats. The profiles are bent and closed at the footing. The wooden slats align with the frames. Mounting Screw-on or free standing. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats made from hardwood. – The following changes are possible for an extra price: colour and wooden surface. ABES Bench 100 Overview: Park bench with back rest, – Feet: Stainless steel 1.4301 pickled and smoothed or Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats: Hardwood. – Measurements (L x H x W in mm): 1700 x 740 x 760. – Delivered unassembled.