Machines for installations - Import export

SPIROL’s Series 2000 Vibratory Feed Systems provide higher feed rates, gentler feeding, and the ability to accommodate a wider range of part configurations and materials than conventional feed systems. The advanced state-of-the-art electronic controller combines modern technology and unique features to deliver superior performance by continuously and automatically adjusting the drive system to the natural frequency of the bowl. This variable frequency technology compensates for changes in the bowl mass to ensure consistent feed rates and eliminates bowl tuning, allowing interchangeable bowls with a single drive. Additional benefits include increased energy efficiency, clockwise/ counterclockwise capability, reverse rotation, and significantly lower noise levels. The controller utilises a touch screen interface with the capacity to store 50 recipes. This system is ideal for fragile, tactile, and slippery parts. Visit www.SPIROL.com to learn more!

The Model CLX operates the same way as SPIROL's Model CL, yet this extra-large Compression Limiter Installation Machine is custom-designed to accommodate larger assemblies outside the standard footprint of the Model CL. Visit www.SPIROL.com to learn more!

This robust, vertical installation machine is specifically designed to install Compression Limiters into a variety of plastic components. The machine is available in two models: the CL1000 is capable of 4.4 kN (or 1,000 lbs.) of installation force and the CL2000 is capable of 8.8 kN (or 2,000 lbs. of installation force, and is available with multiple installation tips in nearly any configuration at various elevations. The incorporation of a touchscreen operator interface machines makes our machines easy to use and customisable. Language conversion is easily executed to support international use. The Model CL is equipped with installation verification to ensure that the machine has completed a full installation cycle and a Compression Limiter was installed at each location. This highly flexible platen style machine with 228mm x 279mm (9" x 11") working area. The Model CL is available with optional enhancement features for error-proofing and maximum efficiency.

This versatile tool is ideally suited for low to moderate levels of production for assemblies that require installation forces up to 22.2 kN (5,000 lbs). The Model PMX Extra Heavy Manual Pin Inserter easily accommodates quick change-overs. The fixture is simply replaced at the base of the machine, and the pin diameter is easily changed by switching the pin driving chuck. This Extra Heavy Duty Manual Pin Inserter will provide smooth operation, repeatability and durability.

MACHINE OUTER CASING REVISION MACHINE MECHANICAL OVERHAUL CNC PERIODIC MAINTENANCE AND GENERAL MAINTENANCE SERVICES MACHINE TRANSPORTATION MACHINE INSTALLATION MAKING IDLE MACHINES OPERATIONAL MANUFACTURING AND APPLICATION OF MACHINE COMPONENTS

We provide complete assembly, disassembly and service. Our technicians can install machines and industrial lines in your factory or at your customers' premises." Ease. We have a strong team of mechanics and electricians with experience working in different countries, under different conditions and with different machines. We communicate in English, German and Polish. We have the necessary equipment and tools to perform all tasks. We always come to the project fully equipped and ready for work. We implement the project based on the given documentation, adapting to the customer's specifications. We provide service of the highest quality. We value safety and speed.

This is a plactic cover,used for machine accessories.

Other information iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible Other information Installation instructions Join, separate and fill the easy triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® E332.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® E333.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® This modular joint system is especially suited for: Three-axis movements of machines For simple robotic applications Quick installation of cables with "easy" system Simple filling from both sides Where rectangular shapes are required Combination of different bending radii and moving directions Shortening or lengthening possible at "any point" KMA mounting brackets with integrated strain relief Typical industrial sectors and applications Machine tools Robotics Handling equipment Material handling system Plastics industry Construction machinery Vehicle manufacturing General mechanical engineering Medical Equipment Office furniture iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible

Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links Assembly Instructions Application examples Applications in various industrial sectors. E2 mini One-/Two-piece E-Chain® Small pitch for silent operation High torsion resistance Double stop system and large pins for long service life Optimized weight/stability ratio Easy to mount Manifold interior separation Typical industrial sectors and applications Construction machinery Handling systems Installation Packaging machines Textile machines Vehicle construction Wood machines Glass machines Machine construction General mechanical engineering etc. UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Aluminum separators automatically pick up aluminum and steel cans from all waste collected from the recycling stations. 1. Recovery aluminum cans from plastic bottles. 2. High efficiency of recovery of aluminum from city waste.

Micron Buttons are made for Heavy Duty use. You can rely on our buttons to be durable, strong, and provide a secure hold after installation. These Decorative Buttons meet all standards for manufacturers and textile shops. Micron Buttons will ONLY work with Micron dies and the MD 1 Cover Button Machine. The bottoms are available in White Plastic, Black Plastic, Aluminum and Brass. A setting Die and/or Machine can be purchased to install these Buttons. Suzanne Buttons comes with nine different sizes.

The Bombe Cover Button with sewable hook on the back. Grommet Mart’s Buttons are the choice of textile professionals. Our covered Buttons are manufactured with the most modern technology. The front and back are both manufactured of the highest quality which make these Buttons particularly ideal for Clothing, Home, Auto and Marine Upholstery. The bottoms are available in White Plastic, Black Plastic, Aluminum and Brass. A setting Die and/or Machine can be purchased to install these Buttons. Bombe Buttons comes with 14 different sizes with 4 different backer style. Please see our Size Guide and Related product section for details.

Grommet Mart’s Buttons are the choice of textile professionals. Our Covered Buttons are manufactured with the most modern technology. The front and back are both manufactured of the highest quality which make these Buttons particularly ideal for Clothing, Home, Auto, and Marine Upholstery. The bottoms are available in White Plastic, Black Plastic, Aluminum and Brass. A setting Die and/or Machine can be purchased to install these Buttons. Flat Buttons comes with 5 different sizes and 3 different backers. Please see our Size Guide and Related product section for details.

Grommet Mart’s Buttons are the choice of textile professionals. Our Covered Buttons are manufactured with the most modern technology. The front and back are both manufactured of the highest quality which make these Buttons particularly ideal for Clothing, Home, Auto, and Marine Upholstery. The bottoms are available in White Plastic, Black Plastic, Aluminum and Brass. A setting Die and/or Machine can be purchased to install these Buttons. Halfball Buttons comes with 5 different sizes and 3 different backers. Please see our Size Guide and Related product section for details.

Grommet Mart’s Buttons are the choice of textile professionals. Our Covered Buttons are manufactured with the most modern technology. The front and back are both manufactured of the highest quality which make these Buttons particularly ideal for Clothing, Home, Auto, and Marine Upholstery. The bottoms are available in White Plastic, Black Plastic, Aluminum and Brass. A setting Die and/or Machine can be purchased to install these Buttons. Flat Buttons comes with 5 different sizes and 3 different backers. Please see our Size Guide and Related product section for details.

All dies, sold separately. Our portable pneumatic fastener attaching machine is the top choice for the tarp industry as its light weight portability will allow you to take this machine to any job site. It is built on casters so you can work on the floor to install grommets on your heavy duty tarps or banners that are too heavy to lift up. This machine will accommodate installation sizes from # 1.7 to # 3 grommets and can be used with our heavy duty industrial dies for the toughest material installations. The interchangeable dies and the grommets are sold separately. The metal base and the casters are included with the PL 10. At Micron, we Manufacture Quality and Reliability. 60516 (1) High Quality, Easy Portability. The Micron PL 10 high quality portable Grommet Press has a handle on top and is easy to carry around in the shop or to outside job locations.

Our PL 20 Machine is a portable fastener attaching machine that has one hopper to accommodate the grommets to be automatically fed through its unique channeling mechanism built to a standard size. This machine also has a side pocket slot that receives the washers for safely installing your grommets with washers. As it is built to install only one size grommets, this machine can be built to accommodate installation from 1.7 to 3 grommets. The PL 20 is a semi automatic machine. A hopper and chute system feed the eyelets to the top die of the machine. This greatly increases productivity by allowing the operator to set grommets at a higher rate.The bottom washer can also be placed on the bottom die to create a better hold. Our safety system makes the installation extremely safe for the operator. The safety feature checks for any material

metal separator was developed for the examination of plastic granulates, ground material and powders for metallic foreign bodies. It is used in the injection molding and extrusion areas for slow-flowing material columns. Both the detector and the ejection unit have been specially developed for this area of use. This results in top performance data for precision, operating reliability and ease of cleaning. Failsafe storage of all system parameters Digital signal processing for best detection Process- and condition monitoring Standardised system for a wide area of use Robust construction for maximum lifetime Highest precision in long-term operation Fast ejector for minimized material loss Dismantle without tools All components are easily accessible

An accurate and consistent method to install virtually any Compression Limiter into plastic applications requiring up to 4.5kN (1000 lbs). Install just one Compression Limiter into one assembly, or several Limiters across multiple assemblies simultaneously for increased productivity. The Model CP’s quick-change tooling creates the flexibility to adapt the platform to a variety of products within seconds. The Model CP has a 230mm x 280mm (9”x11”) work area and is built on a rigid steel frame with high-precision shafting and linear bearings resulting in smooth operation, precise positioning, repeatability, and durability. The Model CP is available with optional enhancement features for error-proofing and maximum efficiency.

Suitable for online printing of large text and graphics directly onto the sealing film. Can be combined with our online inkjet printer PM460 for simultaneous printing of fixed and variable texts and graphics.

This exceptionally versatile tool for post-mould assemblies is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The SPIROL® Model CM Manual Compression Limiter Installation Machine easily accommodates quick change-overs by simply: • Replacing the fixture • Swapping insertion punch/pusher tip • Adjusting the positive stop for new install height. The use of high quality shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model CM Manual Compression Limiter Installation Machine installs Compression Limiters ranging in diameter from M3 to M10 metric and #4 to 3/8" unified, and has a maximum insertion force of 0.9kN (200 lbs).

Our entry-level model for printing fixed text and graphics on (coated) paper or Tyvek. Suitable for installation on blister packaging machines and can be combined with our PM460 online inkjet printer for printing fixed and variable content at the same time.

Online printing of variable data such as batch number, production date, etc. Suitable for installation on blister packaging machines. Can be equipped with different inkjet systems.

Is a material belonging to the group of highperformance thermoplasts. It has the best heat resistance among plastics with technical use. It also has very high chemical resistance. It is insoluble in all known solvents and resistant to weather conditions. It is characterized by the lowest coefficient of friction, as well as excellent insulation and the lowest dielectric coefficient. It is used in the construction of specialized equipment, in the construction of machines, pumps, in water installations, chemical installations, medicine, food industry, in thermal technology.

SPIROL offers robust, vertical installation machines specifically designed to post-mould install Compression Limiters into a variety of plastic assemblies. The machines can install a single Compression Limiter or multiple Compression Limiters simultaneously into various polymers, thermoplastics and thermosets. SPIROL’s Compression Limiter Installation Machines are versatile solutions designed to be retooled to accommodate changing part configurations. All designs incorporate standardized machine components to reduce factory lead time, improve component reliability, and lower component costs. SPIROL also specializes in application-specific fixtures to ensure that all assembly components are held accurately in place through the installation process.

Flexible, versatile solutions for post-mold Insert installation into thermoplastic and thermoset plastics. SPIROL's Installation Machines are the ideal foundation for stand-alone systems and enhanced assembly systems provided by SPIROL. Our standardized, time-tested, modular designs are robust, reliable and easily adjustable — allowing simple customisation to meet the specific needs of your application. More than 80% of the components in the Insert Installation Machines we design are pre-tested and production-proven standard items. This translates into faster delivery, greater reliability, and lowest cost for Insert Installation Equipment of comparable quality. We specialize in custom application-specific part holding devices. Fixturing – holding your components accurately and firmly during insertion – is a critical element to the performance of your assembly equipment.

roller shutter housing connector We worked with a customer from the construction sector to develop a GRP connecting element that optimally connects the window frame and window blind box. This transfers the high mechanical loads exerted by wind in an optimal way. At the same time, the GRP profile improves the insulation capability of the entire system. The GRP profiles are drilled and counterbored on a large scale using a CNC machine, thus making installation significantly easier for the workmen.

Do you need a compact flat bed cutting machine which can be installed and operated quickly and easily? Are you looking for an economical machine which gives full power in a small area? The MetalMaster 2.0 is the economical entry level machine for simple cnc plasma cutting, just oxyfuel or both combined. Thanks to the space saving, compact construction the machine can be installed quickly ready for use. High position speeds and a fast, intelligent torch lifter reduces non-productive times.