Magnetic field sensors - Import export

Magnetic field sensors are used in particular for contactless detection of the piston position in pneumatic cylinders. Using a patented operating principle, our magnetic field sensors detect permanent magnets of different strength attached to the piston in all common cylinders error-free. The sensors operate wear-free, are short-circuit proof, rugged and IP67 rated. We also offer solutions for use in welding or hazardous areas as well as for analog queries.

Wireless parking spaces' occupancy detector is dedicated for the use on on road car parks, in particular, located in the dense urban infrastructure. Each parking space is equipped with a wireless sensor mounted directly in the existing surface. Based on the continuous measurement of natural magnetic field of the Earth, the sensor is recording field disturbance caused by a vehicle. Information about the state of the actual occupancy of a parking space is obtained as the current register and immediately transferred by radio to a base station using a private or a public IoT network.

High sensitive 24/7 observation and monitoring system, which allows an optimized responding time against any unwanted asymmetric threats. With the harbour and coast protection system of STL, the Navy will have the general capability to detect unknown threats by passive measurement of the signals of an invader. The observation can be conducted for surface and subsurface surveillance. The advantage of the passive detection is that an invader will not recognize he is under monitoring and observation. This increases the moment of surprise and is a big advantage for the naval staff.All this is made possible through an optimal use of available high technologies. Our 3rd generation system is based on STL‘s high resolution data acquisition, highly sensitive preamplifiers in combination with UEP electrodes, very low noise magnetic field sensors, acoustic sensors with highest accuracy, together with state-of-the-art underwater and computer technology

CPU 2.5G Hz x10 Cortex A72 Deca-Core 64bit RAM/ROM TWO-IN-ONE:4G+64G EMCP Touch Panel 5 point Multi-touch/Capacitive/Anti-salt fog/support capacitance pen&gloves 9H Basic Function 2G/3G/4G/BT/GPS/WIFI/FM/ Axis Accelerometer Sensor/Orientation SensorGravity Sensor/Linear Acceleration Sensor/Rotation Vector Sensor/Magnetic Field Sensor/Gyroscope Sensor Extensible Function LF/UHF RFID/ NFC/GPS+GLONASS Navigation/38K/Zigbee Camera 13.0MP(AF)with flash led/5.0MP sub Camera 2G/3G/4G Band GSM（B2/3/5/8，WCDMA （B1/2/5/8，TDSCDMA（B34/39，TD-LTE （B38/39/40/41；FDD LTE（B1/2/3/4/5/7/20)； EVDO,CDMA 1X Wifi Dual-band (2.4GHz/5Ghz) 802.11 a/b/g/n MAC/BB/RF Bluetooth: v2.1+EDR/BT 3.0+HS compliance/ Bluetooth v4.0 Low Energy (LE)

Magentic Senosr MSK320 linear Max. resolution 40 μm. Repeat accuracy ±0.04 mm. Works with magnetic tape MB320/1. Reading distance ≤2 mm. Max. resolution 12.5 μm max. resolution 0.006° with MR320 or MBR320 (250 poles) Repeat accuracy ±0.04 mm Repeat accuracy of ±1 increment Works with MB320/1 magnetic tape, MRI01 or MR320 magnetic ring, MBR320 magnetic tape ring Reading distance ≤2 mm Max. 16000 pulses/revolution in combination with MR320 or MBR320 (250 poles) Optionally with reference point R or flexible reference marks FR

Max. resolution of 5 μm absolute, 1 μm incremental. Repeat accuracy of 0.005 mm. SSI, RS485, CANopen output circuits. Additional incremental signals LD as an option (SSI, RS485). Reading distance ≤1.3 mm. Max. measuring length 10240 mm. Status LEDs for diagnosis.

The MSC500 magnetic sensor has a large, multi-color status LED that makes commissioning and function monitoring easier for users. The correct distance between the gage and the sensor can be visually monitored.With the plug connection directly on the sensor head, the MSC500 is also suitable for use in very confined spaces. As a result installation is fast and simple, which naturally means lower costs. In addition, the MSC500 sensor includes all digital square wave signals. This enables evaluation of the A/B signals, the inverted signals and the periodic index signals with the same sensor. Max. resolution 1 μm. Max. 200000 pulses/revolution in combination with MR500 or MBR500 (160 poles). Repeat accuracy ±0.005 mm. Status LED with integrated distance monitoring. Works with magnetic tape MB500/1, MR500, MBR500. Reading distance ≤2 mm.  Sensor connection can be plugged with KV1C cable extension. Output circuit PP, TTL, LD (depending on the operating voiltage) .

A combination of the MSAC506 magnetic sensor and the MRAC506 magnetic ring forms a system for absolute angle measurement. The MSAC506 sensor has an SSI interface with a resolution of 12 Ö 16 bit. There is also an analogue output (1 VSS) with 64 periods for dynamic position tracking. The sensor has an LED for distance monitoring. Magnetic absolute encoder single-turn. Compact design. Resolution 12 … 16 bits. Additional analog Sin/Cos 1 VSS signals. Reading distance ≤1 mm

With flexCoder technology, the MSAC200 can be flexibly adapted to the customer's design and provides precise absolute values with high installation tolerances at the same time. It is basically possible to adapt the encoder and the magnetic ring for precise fitting, for example in motors. An additional feature is the high reading distance ≤0.6 mm and axial tolerance of ±0.2 mm to facilitate the design of the overall system and enable use in dynamic applications. Customer-specific design. Integration into small installation space possible. Absolute resolution up to 21 bit. Repeatability 0.01°. Reading distance ≤0.6 mm. Interface BiSS C, SSI. Optional analog real-time signal output Sin/Cos 1 Vss. Industrial and medical applications e.g., motor feedback, handling automation and robotics.

Repeat accuracy of ±1 increment. Status LED display. Works with MR500 magnetic ring, MBR500 magnetic tape ring. Reading distance ≤2 mm. Max. 200000 pulses/revolution in combination with MR500 or MBR500 (160 poles).

High scaling factor ≤64. Pole length 3.2 mm. Speed-proportional signal output. Reading distance ≤2 mm. Works with MB320/1 magnetic tape, MRI01 or MR320 magnetic ring, MBR320 magnetic tape ring. Option: ATEX version withTPS 13 ATEX 47828 001 X EC type-examination certificate.

Max. resolution 5 μm. Speed-proportional signal output. IP67 protection category. Fixed reference point. Insensitive to dust, shavings, humidity, etc.

Max. resolution 0.045° with MR200 or MBR200 (100 poles). Repeat accuracy of ±1 increment. Works with MR200 magnetic ring, MBR200 magnetic tape ring. Reading distance ≤0.8 mm. Max. 4600 pulses/revolution with MBR200 (230 poles).

Max. resolution of 0.25 mm. Repeat accuracy ±2 increments (max. ±0.5 mm). ​Works with magnetic tape MB4000. Reading distance ≤20 mm.

Max. resolution 1 mm. Repeat accuracy of ±1 increment. Works with magnetic tape MB400. Reading distance ≤4 mm.

Max. resolution 1 μm. Repeat accuracy ±0.01 mm. Status LED display. Works with magnetic tape MB500/1. Reading distance ≤2 mm.

To be connected to magnetic displays MA505 and MA561. Max. resolution depends on downstream electronics unit. Repeat accuracy depends on downstream electronics unit. Reading distance ≤1 mm. Max. measuring length 5120 mm.

The MSK320R contains two sensor elements and two signal conditioners, therefore providing two independent output signals A1. A2. B1 and B2 as well as the associated inverted signals  /A1. /A2 /B1 and /B2. Combined with a safe input card, the sensor can be used in the overall system up to Performance Level PLd. Enhanced safety owing to independent output channels. 2 magnetic sensors and 2 signal conditioners in one sensor head. Small, space-saving housing. Reading distance ≤2 mm. Repeat accuracy of ±1 increment. Great application temperature range of  -40 … 85° C. Optionally available with Deutsch connectors. Cost advantage by installation of one MSK320R sensor instead of two MSK320 sensors.

Compact design of sensor and connector. To be connected to MA503/2 or MA504/1. Works with magnetic tape MB500/1, MR500, MBR500. Reading distance ≤2 mm.

Max. resolution 25 μm. Repeat accuracy ±0.025 mm. Works with magnetic tape MB200/1. Reading distance ≤1 mm.

Max. resolution 10 μm. Repeat accuracy 0.01 mm. SSI, RS485 output circuits. Reading distance ≤2 mm. Max. measuring length 20480 mm.

High-resolution magnetic absolute sensor for use in dynamic processes Max. resolution 1 μm. Repeat accuary 10 μm. System accuracy up to 10 μm. SSI, RS485, DRIVE-CLiQ output circuits. Additional analog real-time signal output Sin/Cos 1 VSS for highly dynamic control (SSI/RS485). Signal period 1 mm. Certified according to SIL2 (DRIVE-CLiQ) for safety applications.

Max. resolution of 1 μm in combination with MA100/2. Repeat accuracy max. ±1 μm in combination with MA100/2. Small, compact design. Works with MB100/1 magnetic tape. Reading distance ≤0.4 mm.

Magnetic Sensor. Compact design of sensor and connector. To be connected to MA502 or MA506. Works with magnetic tape MB500/1, MR500, MBR500. Reading distance ≤2 mm.

Max. resolution 0.2 μm. Repeat accuracy ±1 μm. Status LED display. Reading distance ≤0.4 mm. Robust metal housing.

Linear resolution 0.25 mm. Repeat accuracy of ±1 increment. Operating voltage 5 or 24 V. Works with magnetic tape MB2000. Reading distance ≤10 mm.

Robust metal housing. Status LED display. Sin/cos output 1 VSS. Signal period 2000 μm. Scale MB200/1. Insensitive to dust, shavings, humidity, etc.

Accuracy class ±0.1°. Status LED display. Works with MBR100 magnetic tape ring. Reading distance ≤0.4 mm. Signal period 1000 μm. Output circuit sin/cos 1 VSS. Robust metal housing.

Repeat accuracy max. ±1 μm. Status LED display. Works with MB100/1 magnetic tape. Reading distance ≤0.4 mm. Signal period 1000 μm. Output circuit sin/cos 1 VSS. Robust metal housing.