Analogue indicators - Import export

This is an essential onboard instrument to adjust the seaming rolls and the seaming chucks and set them at the same height. It is equipped with a digital and analogue indicator to guarantee precise measurement.

Most modern methods are applied in the production of our high quality Dial Test Indicators. They are both sensitive and shock-resistant. Here are some of the advantages applicable to the whole series: All features of the models reading up to 1 mm measuring range conform to DIN 2270. This applies to all deviation spans, the measuring force and the hysteresis error of the measuring force Automatic change of the direction of measurement Indication clockwise in all types Precise components, running in ruby bearings, warrant highest precision throughout Precision bearing for the lever shaft Body with 3 dovetail slides for clamping the stem and other equipment Body hard-chromed in order to protect the dovetail slides against damage Tungsten carbide ball 2 mm Ø in measuring inserts Dial adjustable by knurled bezel Supplied in a convenient box with transparent lid with 1 stem Ø 8 mm h 6 and 1 spanner for changing the contact points

Analogue flow indicators for measuring the flow rate of fluids in mobile and industrial hydraulics. The SDMKR is designed with a loading valve for the strain test of the hydraulic system to facilitate precise control of the operating pressure. In addition, this product can also be subjected to a reverse flow direction (without flow rate determination). ▪ Suitable for Mineral Oil (Aluminium), HFC Fluids and Water (Brass) ▪ Designed for in-line installation ▪ Mechanical flow measurement ▪ Controlling working pressure with a pressure control valve (only SDMKR) ▪ Flow indication in l/min and GPM for Aluminium units, Brass units have flow indication for Water and Oil both in l/min ▪ Aluminium unit: Dual scale ▪ Brass unit: Single scale ▪ Thread to connect with pressure gauge (only SDM) Accuracy (at a kinematic viscosity of 28cSt): ▪ Flow: ±4 % FSD ▪ Temperature: ±2,5 °C / ±5 °F ▪ Pressure (only SDMKR): ±1.6 % FS* ▪ Temp. measuring range: +20 °C ... +110 °C / +55 °F ... +245 °F ▪...

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – 360° analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Monitoring for valid measuring signal. Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation. Fulfils all conventional ship classifications: ABS, BV, DNV-GL, LR, MED

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

Brass stick-in sensor, Pt100. Compact and robust design. Simple assembly with protection tube. Various immersion depths available on request. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available.

Copper screw-in sensor, Pt100, NTC thermistor. Compact and robust design. With Pt100 or thermocouple measuring element. Simple assembly via screw-in thread. Suitable for bearing temperature measurement. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available.

Stainless-steel screw-in sensor, Pt100, NTC thermistor. Compact and robust design. Simple assembly via screw-in thread. Pressure spring achieves constant contact with the measuring point. Available in various immersion depths. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with a Pt100 or an NTC thermistor measuring element.

Stainless-steel/brass screw-in sensor, Pt100/Pt1000. Compact and robust design. Simple assembly via screw-in thread. In a stainless-steel or brass version. Available as 2-wire or 3-wire. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with a Pt100 or Pt1000 measuring element.

Aluminium flange sensor, Pt100, NTC thermistor. Compact and robust design. Simple assembly at the measuring point. Space-saving dimensions. Available as 2-wire or 4-wire type. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with a Pt100 or an NTC thermistor measuring element.

Brass stick-in sensor, Pt100/Pt1000. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly with protection tube. Exchangeable sensor unit. Various immersion depths available on request. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with 1x Pt100, 2x Pt100, 1x Pt1000 or 2x Pt1000 measuring elements. Approvals: DNV-GL

Stainless-steel stick-in sensor, Pt100/NTC thermistor. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly with protection tube. Connection using tab connector, cable outlet at the side. Pressure resistance up to 40 bar. Available in various immersion depths. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with a Pt100 or an NTC thermistor measuring element. Approvals: BV, DNV-GL

Stainless-steel screw-in sensor, Pt100 Robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly for bearing temperature measurement. Available with a levelling piece and screw-in gland, as well as a compression fitting. Available in various immersion depths. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with 1x Pt100, 2x Pt100 or 3x Pt100 measuring elements. Approvals: BV, DNV-GL, LR

Brass screw-in sensor, Pt100/Pt1000. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly with protection tube. Exchangeable gauge slide. Available in various immersion depths. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with 1x Pt100, 2x Pt100, 1x Pt1000 or 2x Pt1000 measuring elements. Approvals: DNV-GL, LR