Cabling machines - Import export

Mini Razzor 150 cable granulator is advanced-level cable and electronic waste recycling machine. With the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. The machine is equipped with all needed to work independent. Just supply the electricity and you can start to recycle your cable or electro waste for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.

-For medium duty use -Minor oil influence -More suitable for indoor applications, but also for outdoor use at temperatures > 5 °C -Unsupported travel distances and up to 20 m for gliding applications -Bus connection cable for machining units/machine tools, handling, indoor cranes

MINI TWIST 140-160 CABLE - SEALING MACHINES WITH TWIST BAND Twisting manual machine, designed and built to tie different kinds of product, with a twistband wire. It is mode in varnished steel assuring a long life. The MINI TWIST is user-friendly and astonishes for its simplicity. It makes possible a grow of productivity of the worker himself. The machine is feeded by a reel of plastic wire, so-called "Twist band" which has a metal wire inside.

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral

Two accumulation places für high speed Low maintenance Low wear Very quiet operation Also without accumulation areas possible Upstream and downstream interlocks Settings by intuitive operating terminal In conveying direction left or either right Machine movable Power cable, length 3m OPTIONAL: One pop-out roller on entry side PLC control Table height steplessly adjustable Many specific options available, easily configurable Fully electrical system, no pneumatic connection required

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 451

Polymer catheter shafts and components, as well as insulated wire and cable, can be precisely machined through non-contact laser ablation.

This machine is not only able to crimp the biggest hoses ever for a UNIFLEX machine, it is also the most compact machine for mobile work in UNIFLEX history. The HMC 12-2000 is the most solidly built C-crimper of the 2000 ton category due to its integrated power booster for high crimping forces. After a long period of research and development in the field of FEM, this machine outshines all others of its category. UNIFLEX defines new crimping techniques and focuses on not only the highest quality and user friendliness but also advanced materials. The strongest C-Crimper for hoses worldwide •C-form crimper with 2000t effective pressforce with UNIFLEX greaseless technology •C-form crimping tool, open on the side, with an 355mm opening - no limit for flanges •Max. crimping range 380mm •For up to 3“ hydraulic / offshore / tubular & 12“ industry hoses •Robust construction for heavy duty •Ideal for special application with its high crimping force

Cable trunking for footfall loading in machining centres PFLITSCH Automobile-Trunking complies with the works standard for many automotive manufacturers and serves as walkable floor trunking in many automated manufacturing lines and robotic production plants, allowing loads of up to 1,200 N and using antislip channelled sheet covering (slip-resistance rating R10). With seven cross sections from 100 mm to 600 mm wide, standard base perforations and universal separating walls, this robust trunking can be placed and combined with other PFLITSCH trunking systems to customer requirements. Your advantages: Walkable floor trunking with high footfall load High strength, wide support spacing Channelled sheet for antislip safety Can be combined with other trunking systems

The Cable Entry Plate KADP is used to insert and seal cables in enclosures, machines and control cabinets. It provides a high flexibility for varios applications. KADP is perfect in tight spaces, as several cables can be inserted into the plate. Due to the ideal placement of the close-fitting insertion points, a high packing density with a protection grade of IP66 is achieved. The installation of the KADP into the enclosure is time-saving, by simply snapping the plate in with a single click. The cables are simply plugged in and the job is done. The "pushout" membrane re-seales almost by itself after removing the cable.

We produce a huge range of fitness equipment, different types of benches: declined bench, abdominal bench, curved bench, atlas combined bench, adjustable bench, bench for crunches and upholstered for wall bar, inclined bench with adjustable weight, hypertension bench, horizontal bench, fixed flat bench, dip bar abdominal, dip bench bar abdominal, leg press, olympus combined machine, scott bench, short abdominal bench, upper bench, vertical bench, also cross trainers, tread mills, vibro trainers rowing machines, steppers, bars, dumbbells, cable machines. etc.

Main products: TMY copper, T2 / TU2 copper rods, profiled bars, electrical round copper billets Product characteristics: High copper content, low oxygen content, compact structure, uniformity, low electrical resistivity, high electrical conductivity, precise size, excellent mechanical properties; can be customized according to demand Applications: High and low voltage electrical appliances, power electronics, power transmission and transformation, automotive industry, molds, communication technology, cables, machining, metallurgical chemicals, construction industry Production capacity: 100,000 tons Honorary titles: Zhejiang Famous Brand Product

Product Name:Tent accessories Color:Customized Material:Aluminum Usage:Outdoor Accessories Function:Camping Activity Logo:Customer's Logo Keywords:wire rope tensioner

Allows the counter to be reset to zero manually at the push of a button or program controlled during marking. Option PN comprises of a compact compressed-air cylinder in the marking wheel and a RESET key on the machine’s control panel. Programmable, automatic reset function requires Option W. W - PROGRAMMABLE ELECTRONIC CONTROL MODULE FOR PN PNEUMATIC RESET SYSTEM OR OTHER PNEUMATICALLY OPERATED FUNCTIONS Causes, for instance, the counter to be reset to zero or the marking wheel to be lifted every time a preset length of cable has passed through the machine. An additional, programmable contact closure allows an external process (e.g., cutting the cable at a preset length after the counter has returned to zero) to be triggered. 2W - EXTERNAL DEVICE PRE-SELECTION Option 2W features a second pre-selection counter to be used for controlling an external device, e.g. for triggering a cutting device when achieving a pre-defined length of the marking good. The pre-defined length corresponds

B - STROBOSCOPE Automatically synchronized flashing stroboscope for monitoring the quality of printed marks. High quality finish with tight and resistant to sol­vent metal casing. VST - VIDEO SYSTEM FOR MONITORING THE PRINT QUALITY Medek & Schörner also offers a video system for monitoring the print quality of fast-running cable printing machines, e.g. allowing real-time inspection for bad quality and/or missing prints. FM-P - REPLACEABLE INK SUPPLY MODULE With ink tank, pump, cooler, filters, and ink flow fine adjustment and selector valves. Allows the printing ink to be changed in about 2 minutes. Ink can be stored in the ink tank for several weeks with no degradation of ink properties.

Produce your air cushions automatically to avoid unnecessary waiting times. Once the stock level is reached, your AirWave1 or AirWave2 automatically stops the production using the level sensor. The machine automatically starts again as soon as cushions are removed from the container. The level sensor with infrared light barrier has a sensor range up to 400 mm. Fits the AirWave1 and AirWave2 air cushion machine. Cable length: 1.35 meters

The VST video stroboscope has been designed to continuously monitor the print quality of fast-running cable printing machines. The system also offers the convenience of being able to view the entire print area at various magnifications on a monitor screen. The integrated software allows various evaluations of the displayed print area; e.g. alarm in case of bad quality and / or missing prints. Print monitoring at speeds up to 2500 m/min and above Real-time inspection for bad quality and /or missing prints The device is e.g. synchronized with the gravure printer's stroboscopic signal output (12 pulses per printwheel revolution). A special high-speed camera periodically takes a sequence of 12 consecutive partial print photographs depicting the total print impression printed by the printwheel circumference and outputs them via a 1 Gb/sec Ethernet interface to any computer (not included with the basic VST Video Stroboscope).

Metzner has developed a fully automatic processing machine with outstanding cutting quality and great length accuracy for steel cable wires of up to 20 mm diameter. The steel cable wires are fed by a motorised feeding device in combination with a contact-free loop control. Then, program-controlled and positionally accurate marking tapes are applied to the steel cable – with a cycle time of less than two seconds. In addition, a wax printer marks all the fastening and processing points that will be required for subsequent processing. This labelling method is carried out in a continuous process. The cut is then made using a special cutting process. Precise length accuracy is achieved by a special laser measuring system. A material stacker with a storage area of up to 12 metres ensures that the steel cable wires are deposited in an orderly manner. All cut steel rope can be stored and sorted according to length to allow it to be removed at a later point.

The Metzner AM 5000 range includes the flagship models for precise processing of thick cables up to 240 mm² section and 35 mm diameter. Even the basic specification models, with their high torque and powerful three-stage step motors offer the highest level of cutting and haul-off power. All models are equipped with as standard with the Metzner double-knife system that enables very varied and multi-stage processes to be performed. Moreover, with convincing operator-friendliness and long service life. Metzner AM 5000 models are also suited to processing thinner braided cables from 1.5 mm² The stripping full haul-off 1side/2nd side amount to 270-450 mm and 90-270 mm, for partial haul-off 450 mm and 270 mm. For interuption-free automatic production, a number of sensors monitor the material feeding If a material blockage occurs, the production stops automatically and the operator is informed about the cause of the fault.

The cable processing machines in the AM 3800 range are characterised by their outstanding cutting and haul-off power and their modular, robust and long-life construction for continuous use in industrial applications. These machines outstandingly combine power and versatility. Equipped with cutting power for cables up to 70 mm sectionand 20 mm diameter, they are the ideal solution for an unusually wide spectrum of applications. Depending o the processing demands, numerous knife contours and technologies are available: the patented double-knife system allows different processes to be performed in a single working pass. The circumferential rotary cut offers an exact cutting round cables with very thin or tough insulation outer cover.

The AM 3000 range of cable processing machines are distinguished by cutting and haul-off power and their convincing modular, robust and long-life construction for continuous industrial working. There are different models with different cutting powers and specifications. To match the processing requirements, numerous knife contours and technologies are available: The patented „ double-knife system“ facilitates different processing in a single working pass, the circumferential rotary technology offers exact circular cutting for cables with very thin or rigid outer insulation cover and for co-axial cables. Every model is equipped as standard with a full set of interfaces for peripheral equipment and IT integration. The machines can easily be converted into complete production lines, thus further increasing the process automation.

The Metzner AM 1000 is a sensation among the tabletop units. The automatic cutting and stripping machine processes cables, strands and wires up to 9 mm diameter and 6mm² cable cross-section with a special cutting and pull-off force (optional 10 mm², depending on material). The presettings are conveniently made via the modern 12" touch panel, where the operator can define all processes. Thanks to the sensors for diameter and material recognition, the AM 1000 works extremely precisely. Another special feature is the tool-free replacement of guides and rollers. This means that the AM 1000 can be changed over in just one minute. With the extensive interface preparation, the machine can be optimally expanded with peripheral devices and adapts to all customer requirements. The compact design with retractable touch-screen and the low weight of only 28 kg also offer special comfort. This makes the AM 1000 especially easy to transport.

The powerful "universal cutting machine" with superior pulling and cutting strength. The contact pressure between the conveyor belts is pneumatically controlled and opens and closes automatically when the cover is opened and closed. Ideal for solid and dimensionally stable materials. Metzner also offers the Variocut in three “Red – Green – Blue" equipment lines. Each equipment variant is based on the same basic model with the same high-quality mechanical components. The individual models differ in speed, control and the interfaces for peripherals.

The EM 600 can integrate up to six successive process tools in one single station. After insertion, the cable remains in a fixed position while the tools move towards the cable to provide optimum protection for the HV cable wires. The total cycle time of an EM 600 station is approx. 35 seconds for all operations of this station, with a total capacity of approx. 400,000 cable ends per year.

The Metzner EM 300 platform offers further convenience in high-voltage cable processing through a quick change of process tools and faster cycle times. Depending on the requirements, the HV cable processing machine can thus be equipped with different tools for cable processing. This means that the EM 300 can be used for several processing steps and is prepared for a wide range of processes. In addition, with the EM 300 we protect your investment by offering improved expandability that enables “plug-and-play” integration of future new applications.

This special Metzner development is able to process cable wires with a diameter of up to 28 mm. The cycle time for this is 2000 mm / 35 seconds. The processing steps include long slitting, sawing, circumferential cutting, stripping, brushing and depositing. An integrated ink jet printer labels the cable wires with information or markings. As the heart of the processing method, Metzner uses a newly developed stripping head that combines a rotary cut with a powerful clamping and simultaneous rotation of the material. This enables a high-precision, multi-stage radial cut through the various layers of material. Microscopic quality inspection confirms that the processing is flawless with no scratches, pressure or abrasion marks. In addition to the high machining quality, the machinery also offers special precision: both the overall length and the machining position are maintained with an accuracy of 0.2 mm. The machine can process cable wires with diameters up to 28 mm.

GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).

GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).

PVC-Control cables are used in tool-machines, conveyor belts, production lines in machinery production, in air-conditioning and in steel production. They are used for installing in dry, moist and wet rooms, specially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements.