Cylinders- pneumatic - Import export

1. NBR shaft seals on hardened cylinder barrels Drum motors axles are usually manufactured from ST37. Commercially available seals rotate directly on the axles. The result, at some point in time, is grooves on the axle. In addition of course oil leaks. This is not the case with the FTK Förderband Technik Kilian pulley motors all drum motors are equipped with hardened and polished cylinder barrels made of stainless steel 316. 2. Oil loss is not a problem for us! Oil change after 50,000 hours of work. Today, for reasons of cost, fewer and fewer users concern themselves with plant maintenance. The maintenance of complex plants is mainly carried out by outside specialists. Simple prefabricated parts, however, are usually used till worn out. This is also the case with drum motors. We have made allowance for this behaviour. The FTK Förderband Technik Kilian drum motors only require an oil change after 50,000 hours of work. In the case of operation with 3 shifts for example

Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on both sides.

Doubleacting pneumatic cylinder acc. to DIN ISO 21287. Piston rod with internal or external thread, position detection for proximity switch and flexible damping on both sides. Thanks to their compact structural dimensions, compact cylinders are ideal for use in installation spaces where space is limited.

Doubleacting pneumatic cylinder in constructionoptimised design acc. to DIN ISO 15552. Piston rod with external thread, position detection and adjustable pneumatic damping. Due to their robust construction, these cylinders are the preferred choice for numerous applications.

Solenoid valves made of brass, membrane-controlled for air, gases, steam and non-aggressive liquid media. In the sizes 1/4" to 1", as 2/2 and 3/2 Valve available in NC or NO in all common voltages and various sealing materials.

Brass solenoid valves indirectly controlled for air, gases, steam and non-aggressive liquid media. In the sizes 1/4" to 1", as 2/2 and 3/2 Valve available in NC or NO in all common voltages and various sealing materials.

Directly controlled brass solenoid valves in a very compact design for air, gases, steam and non-aggressive liquid media. In sizes 1/8" and ¼" as 2/2 and 3/2 Valve available in NC or NO with a choice of nominal widths from 1.5 to 4.5 mm in all common voltages and various sealing materials.

Miniature ball valves and universal ball valves in brass, with 1/8 to 2″ thread or plug-in connection for hose 4 to 8 mm.

Manual slide valves as real shut-off valves, which allow the system to be vented when it is switched off. Available in sizes 1/8 to 1/2″. Other colors such as black or red, as well as special versions with spring return or latching are available on request.

Stop valves for shutting off and locking in the event of an unintentional drop in pressure. Pneumatically unlockable, for direct installation in the cylinder air connection.

Quick exhaust valves in stainless steel for applications in aggressive environments, food or pharmaceuticals. Available in sizes 1/8 to 1".

Quick exhaust valves made of nickel-plated brass. For quick bleeding of cylinders and systems. On request also fully assembled with hose connections and exhaust air silencer. Available in sizes M5 – 1/2

Check valves in stainless steel for line installation for demanding applications and high frequencies. Available in sizes 1/8 to 1".

Non-return valves for in-line installation, series VR, made of nickel-plated brass. With threaded connection and/or hose plug-in connection.

Logic element VS in practical block form with OR function. AND elements and other logic valves are available upon request.

Throttle valves and throttle check valves in stainless steel for applications in aggressive environments, food or pharmaceuticals. Available in sizes 1/8 to ½". Larger dimensions on request.

Pedal valves with foot actuation. Available with protection or without protection cover in the functions 3/2 and 5/2, also with latching. Stable stand and safe use thanks to the wide base.

Manually actuated directional valves with a wide range of actuating elements for panel mounting in 84 possible combinations. Whether in 3/2 – 5/2 way, NC or NO function, linear or built in at 90° – You can implement your application with this valve series.

Pneumatically and electrically operated valves with connection pattern according to NAMUR. High quality aluminum construction. Available in 1/4 and 3/2 and 5/2 sizes.

A classic. The VI series valves comply with the specifications of ISO 5599/1 in sizes ISO 1 and ISO 2 with various configurations and base plates.

The new generation of our VH series valve terminals. Modern pneumatics with economical energy consumption, compact dimensions and high flow rates. With multipolar electrical connection with D-SUB 25-pin or flat connector as standard. Core items: Reduced dimensions (15mm) Low power consumption (0.85W) High flow rate for size Compact and clear design Metal construction for a long service life even under harsh environmental conditions Fast cycle times thanks to the latest generation of magnetic coils Manual operation easily accessible LED display integrated in the magnetic coil Connection strips with modular system All islands are delivered assembled and tested

Our 15 mm valve series type VB as flange valve for battery assembly. Valves controlled electrically and pneumatically, completely in aluminium. Technical properties like our VA series.

Our 15 mm valve series type VA. Valves controlled electrically and pneumatically, completely in aluminium. Available as a single valve or on modular manifolds for maximum flexibility. Core items: Reduced dimensions (15mm) Low power consumption (1 W) Modern design and compactness, for easy installation. Insensitive to pollution. Solid metal construction to ensure long runtime even in demanding environments Flexibility: The valve can be easily wall mounted, manifold mounted and multipolar connection units 3 different connection types LED display manual override Connection strips with exclusive modular system

The pneumatically operated directional valves VK are robust, reliable and can be installed in a variety of ways. Installation in-line, on the wall, on modules, as a battery or directly on cylinders is possible without any problems. Available sizes between 1/8, 1/4 and 1/2 in 3/2, 5/2 and 5/3.

This battery system allows the assembly of a series of solenoid valves type VY in 1/8 with various functions. The electrical control is integrated in the housing and equipped with a 25-pin SUB-D connector. The valve terminal can be preconfigured and ordered fully assembled and tested, or, thanks to the very simple, intuitive coding, you can assemble it yourself on the basis.

The VY solenoid valves are robust, reliable and can be installed in a variety of ways. Installation in-line, on the wall, on modules, as a battery or directly on cylinders is possible without any problems. Available sizes between 1/8, 1/4 and 1/2 in 3/2, 5/2 and 5/3.

The modular VD valve series allows the valves to be universally installed in a chain or on Omega DIN EN 50022 mounting rails. The solenoid valves guarantee fast switching times and are available in 3/2 NC or NO. Threaded connection G 1/8.

Our VD series solenoid valves are mounted to save space on a manifold battery output with 2 to 10 valve positions as standard.

Our VD series solenoid valves are mounted to save space on a manifold battery output with 2 to 10 valve positions as standard.