Electric wires - Import export

AS: For transmission of electric power in overhead electric networks, used in I and II type atmospheric air provided that the content of sulphur trioxide in the atmosphere is not more than150mg/m2 per day (1.5mg/m3) and in all microclimatic regions of the land according to standard 15150-69. ASKP and ASKS: Used on the seashores, in industrial regions, salty sandy regions, as well as regions adjoining them in II and III type atmospheric air provided that the content of sulphur trioxide in the atmosphere is not more than150mg/m2 per day (1.5mg/m3) and Chlorine salt not more 200 mg/m2 ,in all microclimatic regions of the land according to standard 15150.The conductor is made by twisting of the steel conductor and aluminum wire. Regarding to the structure, the steel core is single-wire or twisted multi-wire. In case of twisting in layers, the twisting is performed in opposite directions.

For laying in ground, open air, in concrete, inside buildings, in cable channels, in electrical stations, in industrial plants and in the commutation systems where there is no danger of mechanical damage of the cable. Because the permissible operating temperature of the conductor is + 90 0C. Core isolation (XLPE) polyethylene provides higher current loadThe aluminum cores with section 2,5-16mm2 inclusive are produced of single wire of 1 class flexibility, 25-240mm2 inclusive with twisted multi-core wires of 2 class flexibility, according to standard IEC 60228 : 2004. Number of cores in the cable 1,2,3,4,5.Label attached to wooden drum or bundle, or in case of request of the customer with inscription on top: “JSC Sakcable” cable brand, date of production. Labeling of conductive cores with colors or figures 0,1,2,3,4 with inscription on the top of insulated cores

NSPV solar cable is used in photovoltaic power generation and solar system which interconnects solar panels and electrical components. The cables applicable for humid environment, medium-sized machinery and equipments, refrigerators, washing machines, dryers and similar household appliances.

From the design phase of your project, we take care of installing all the electrical and electronic components: electrical studies PLC studies and programming production of electrical diagrams, wiring and installation logbooks wiring of power cabinets, control cabinets (automation), pneumatic cabinets and frames installation of cable trays on-site connection final inspection, power up and validation

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Standard luminaire, Standard with Power box(built-in Constant current power supply), AC220V Plug-and-Play Support no dimming/0-10V/DALI dimming Up and down lighting design with suspension way, 25mm slender lighting surface . 100 Lm/w high light efficiency design, lumen output up to 3600 Lm/m . Multiple light distribution options(Diffuser, Microprism, Grating 30°, Grating 60°) to meet variety application requirements Electric wire& suspension wire with two-in-one design, invisible and beautiful

25mm slender lighting surface 105 Lm/w high light efficiency design , lumen output up to 2100 Lm/m . Multiple standard corner ( L type , X type , T type optional ) available for free connection . Multiple light distribution options (Diffuser , Microprism, Grating 30°, Grating 60°, Block frosted diffuser) to meet variety application requirements . Electric wire& suspension wire with two-in-one design, invisible and beautiful

Standard luminaire，Standard with Power box（built-in Constant current power supply）, AC220V Plug-and-Play. Support no dimming/0-10V/DALI dimming. 25mm slender lighting surface. 100 Lm/w high light efficiency design, lumen output up to 1700 Lm/m. Multiple light distribution options (Diffuser , Microprism, Grating 30°, Grating 60°, Block frosted diffuser) to meet variety application requirements. Electric wire& suspension wire with two-in-one design, invisible and beautiful

Up and down lighting design with suspension way , 25mm slender lighting surface . 105 Lm/w high light efficiency design , lumen output up to 4200 Lm/m . Multiple standard corner (L type , X type , T type optional) available for free connection Multiple light distribution options ( Diffuser , Microprism , Grating 30°, Grating 60°) to meet variety application requirements Electric wire& suspension wire with two-in-one design, invisible and beautiful.

Today, electrical and wired devices are the most needed products. Computers, televisions, internet, chargers or many machines are used wired. In order for the cables to have a long service life and be used without problems, they must be very well maintained. For this, there are also cable regulators. These regulators prevent and protect the cable from damage. In this way, there are no situations such as breaking, breaking, crushing or bending. It is one of the most preferred materials.

# Description Taihan Fiberoptics offers an extensive selection of metallic fiber optic cables designed to protect overhead transmission lines from lightning strikes and to prevent fault currents (over voltages) and to created a path for communication through its optical fibers. We have a wide range of OPGW cables and we can accommodate specific requirements of various clients and projects in order to provide customized bespoke design to suit customers' needs. # Features - Crush Resistance (Shield Wire) - Electrical Performance (Aluminum Pipe) - Cost Saving (Fast Splicing) # Products - OPGW Steel Tube - OPGW AL Tube - OPGW non-Metal

New 5-in-1 retractable cable, made of 100% recycled plastic RABS, recycled TPE for the cable, bamboo top. 3 connectors, Lightning, Android, and Type-C connectors. 2 functions, charging and data transfering. All in 1, made for all your mobile phone devices. Restractable cable, convinient to bring it with you. 1 meter length, optimal to use it.

NSPV Solar cables 1000VDC 1500VDC Manufacture according to customer's special request. Application: Specifically designed for connecting photovoltaic system components inside and outside of building and equipment with high mechanical requirements and extreme weather conditions. For permanent installations. General characteristics: Cable made of electron-beam cross-linked insulation and coating; high resistance against heat, cold, oil, abrasion, ozone, UV and weather; with improved reaction in case of fire. low smoke, halogen free, flame free , flame retardant; flexible, easy to strip, very low space requirement, extremely, extremely mechanically robust, very long lifetime.

The NEW TWIST SE 120 is the tying system with wire twistband most innovative and affordable on the market. Unlike the other models uses a non-reciprocating motion mechanism that eliminates the wire jams and allows the use of only 76 mm of wire for tying, saving about 25% of consumables. For its characteristics the machine is suitable for each type of application for bakery and confectionery products for example cookies or chocolates. Besides being very silent it can be used wherever compressed air machines cause problems of noise and pollution. Use gold wire twistband (plastic tape with the central metal core) which is automatically wrapped around the bag creating a robust closure but easy to open.

The X2000NC is a modular, fully servo-electric wire and tube bending machine that can be configured to customer specifications with various servo-electric units such as NC finger benders, bending slides and presses up to a force of 7000kN. Due to the variable positioning possibilities of the units, a great variety of different forming processes can be realized on the machine. This makes it possible to produce a wide variety of wire, tube and strip products on one X2000NC. Dimensions: from app. 5,50m x 2,50m, app 10 - 30 to.

NSPV Rigid Electrical Conduit with Belled Ends MD grey and HD orange types Features: UV resistant; Australian Standard; PVC Conduit protects and allows runs of cables and conductors; For routing electrical wiring aboveground or underground.

NSPV Solar cables 1000VDC 1500VDC Manufacture according to customer's special request. Application: Specifically designed for connecting photovoltaic system components inside and outside of building and equipment with high mechanical requirements and extreme weather conditions. For permanent installations. General characteristics: Cable made of electron-beam cross-linked insulation and coating; high resistance against heat, cold, oil, abrasion, ozone, UV and weather; with improved reaction in case of fire. low smoke, halogen free, flame free , flame retardant; flexible, easy to strip, very low space requirement, extremely, extremely mechanically robust, very long lifetime.

Electrical flange type immersion heaters The series of electrical Flange Type FHK-L provides a solution for the heating of liquids / molten salts or similar applications in process tanks or underground tanks. It can also be tank filling levels with very low heat, since only the lower horizontal portion is heated. The flange heater consists of a number of heating elements, which are built into the process flange. The electrical wiring is done in a robust electrical terminal box.

NORPLAST® PVC-CU 384 AS is an antistatic suction and transport hose. It’s heavy, has a smooth interior and a grounding wire. Electrical and surface resistance is approx. 10⁹ Ohm

CSN® copper and nickel are temperatureresistant connecting cables for internal wiring of electric household appliances such as hotplates, glass ceramic plates, grill appliances or storage heaters. In industrial applications CSN® Cables are preferably used for the wiring of heating elements, heating cartridges, tubular heaters, panel heaters, and quartz radiators. We manufacture these singlecore cables in cross sections up to 6 mm². Owing to their high temperature resistance up to 250 °C in the case of glass silk insulation and 600 °C in the case of mineral fibre insulation, these connecting cables meet the most demanding requirements.

Our fully automated winding centres for fine and self-bonding wire make us the perfect partner for any tasks you require. Our coils are tinned with lead-free coatings (RoHS). We can wind onto any desired coil form using many different press-in ferrite and metallic cores. Multiple tap coils are also possible. Pins are automatically applied to the coil connections during the winding process, with wire drawing electrically controlled. Our winding machines handle single-chamber and multi-chamber coils with wire thicknesses from 0.045 to 0.71 millimetres.

The PEEK Flat Wire for New Energy Vehicle Motor is a cutting-edge solution designed to revolutionize the performance of electric vehicle motors. Engineered with precision using PEEK (Polyetheretherketone) material, this flat wire offers exceptional electrical conductivity, thermal stability, and mechanical strength. It enables higher power density, increased efficiency, and extended driving range in new energy vehicles. With its lightweight and compact design, the PEEK Flat Wire optimizes motor performance while reducing overall weight. Its outstanding resistance to corrosion, wear, and high temperatures ensures long-lasting reliability. Experience the future of electric mobility with the PEEK Flat Wire, empowering your vehicle with enhanced power and efficiency.

Where are magnetic field mats used? The coils currently manufactured by us are processed by our customers into so-called electromagnetic field mats. These mats are used in Pulsed Electromagnetic Field (PEMF) therapy. Many PEMF devices are suitable for private use at home. However, various health service providers including physical therapists as well as non-medical practitioners offer therapies based on magnetic fields. Why is our embroidery technology used for production? This technique creates circular-shaped structures that form the basis for a homogeneous flow/direction of the electric current. At the same time, the mechanical wire laying has an extremely high level of accuracy. The distances can also precisely be determined. How is the magnetic field created? Simply put, this is how electromagnetic fields are created: pulsating magnetic fields are generated by the electric current flowing through the wire. The more wire, the stronger the magnetic field.

At our sites in Rothenburg/Saale, Hamm, Brandenburg and Nedri Industriedraht (Hamm), we manufacture iron and fabrication wire for the machine, plant and steel construction industry, shopfitting, displays, automotive, furniture industry, household goods, chains, blasting material, tool carriers, filter industry, fence construction, garden and landscape design, connecting elements, logistics, construction industry, electrical and cable industry, bent wire parts, household appliances and gastronomy, animal husbandry, welding technology, lightning protection systems, gabions, packaging industry.