Electronics - Import export

From the design phase of your project, we take care of installing all the electrical and electronic components: electrical studies PLC studies and programming production of electrical diagrams, wiring and installation logbooks wiring of power cabinets, control cabinets (automation), pneumatic cabinets and frames installation of cable trays on-site connection final inspection, power up and validation

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator: Calculation of motor position according to customer-specific framework conditions — Speed control according to sensor input — Input of light barrier impulse signals — Reading a load balance via analogue inputs — Input of an external speed impulse

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of acids. * Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

■ Configurable output signal (4...20 mA, 0...20 mA, 0...5 V, 0...10 V, ±5 V, ±10 V) ■ DIN rail mounting ■ Low residual noise ■ Built-in cable break detection with alarm-output

The market for an ever-increasing array of consumer electronics parts is made possible by continuing innovation in integrated circuitry, new software applications and the exceptional properties of industrial aluminum, such as its light weight, high formability, superior heat dissipation, electrical conductivity, high corrosion resistance and attractive surface properties. Whether it is smartphones, tablets, laptops or flat screen TVs, aluminum is an integral component in the design, development and production of the latest personal devices and in-home entertainment systems. Novelis is leading the way in producing customized, premium flat-rolled aluminum for many consumer electronics parts and products, including aluminum enclosures and aluminum cases. Our aluminum products, developed according to customer specifications, are supplied in coil or sheet form, then slit or cut to length by third-party distributors or customers themselves.

Specifications: 75W Power Total maximum power: 140W Rated soldering iron power: 75W Temperature selection range: 90-450C Antistatic control box Weight 2.4kg There is no soldering iron tip included in the package. technological materials Strict QC test Less than 1% failure rate 12 Yes Garanti

Specifications Power: 1200W Voltage: 220V 50/60HZ Temperature Range: 100℃-500℃ Air flow Range: 6-200 Maximum air flow: 200L/minute Dimensions(L*D*H): 188(L)*245(D) *135(H)mm Weight: 3.65kg Zero Cycle Count, so you have the maximum amount of cycles remaining. Lithium-Ion Polymer technological materials Strict QC test Less than 1% failure rate 12 Yes Garanti

• For allen keys • The ergonomic multi-component punch handle with rotating cap and soft fine precision zone makes it possible to transfer the smallest torques • Blades hardened and chrome-plated with black tip • Blades made of chrome vanadium steel

Compact, light thermal barriers protect temperature data loggers in reflow ovens with tight space restrictions. Their stainless-steel casings and microporous ceramic insulation ensure maximum protection and service life. The most popular model weighs only 0.7 kg (1.6 lb) and can survive temperatures of 300 °C (572 °F) for over eight minutes. The DATAPAQ Reflow Tracker program provides in-process temperature monitoring solutions for reflow soldering processes. It includes a data loggers,analysis software and thermocouples.

A HC49 crystal with formed leads and clip for SMD application. Available in fundamental and 3rd, 5th 7th and 9th overtones. Close tolerances and specifications available. Low-cost, industry-standard crystal unit formed for SMD Available with close tolerances Frequency range 1.0MHz to 200MHz Specifications fully customisable

90SMX(N) crystals are miniature surface-mount crystals specifically designed to provide a low-cost and reliable source of real time clock 32.768kHz frequency fro mass-marlet applications. The crystals are low-profile and encapsulated in epoxy resin. Frequency 32.768kHz Industry-standard package Compact and low-profile Supplied on EIA tape and reel

A miniature 4 pad SMD TCXO in a 5.0 x 3.2 x 1.3mm package. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Frequency range from 6.4MHz to 40.0MHz. Supply voltage of 2.5V, 3.0V, 3.3 Volts. RoHS compliant. Low cost TCXO with short delivery A miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Wide frequency range: 6.4MHz to 40.0MHz Supply voltage 2.5, 3.0 or 3.3 Volts RoHS compliant Wide frequency range. RoHS compliant. High spec with low cost. Quick delivery

EQ212 crystals are the smallest package currently available. The ultra-miniature SMD crystal, dimensions 2.0 x 1.2 x 0.6mm is available at 32.768kHz . Frequency 32.7680kHz Miniature package: 2.0 x 1.2 x 0.6mm Low mass, rugged construction Amongst the smallest possible crystals at 32.768kHz. Ideal for miniature, battery-powered equipment

EQ156 crystals provide 32.768kHz in an ultra-miniature package. The part is designed to provide the smallest possible component size for real-time clock applications. Their miniature size and rugged construction make them ideal for battery powered, hand-held equipment. Frequency 32.7680kHz Ultra-miniature package: 3.2 x 1.5 x 0.9mm Low mass, rugged construction Packaged in standard EIA tape and reel Miniaturized 32.768kHz crystal for real-time clock applications The part is ideal for battery powered, hand-held equipment

PECL output TCXO in a 6 pad, 7.0 x 5.0mm SMD package. Frequency range 10MHz to 800MHz. Stability from ±1ppm -30°~+75°C. Wide frequency range: 10.0MHz to 800.0MHz. PECL 'W' Group characteristics. RoHS Compliant. Miniature 7 x 5 x 2.3mm ceramic SMD package Frequency range: 10.0MHz to 800.0MHz Supply voltage 3.3 Volts Low cost, low jitter for general applications RoHS compliant

LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. 'W' Group characteristics. RoHS Compliant. LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. W' Group characteristics. RoHS Compliant

Miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. 'V' group TCXO characteristics. Frequency range 27.0MHz to 200.0MHz. RoHS Compliant. Miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Frequency range 27.0MHz to 200.0MHz. RoHS Compliant.

PECL output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 10MHz to 800MHz. Stability from ±1ppm -30°~+75°C. 'F' Group characteristics.RoHS Compliant. TCXO PECL output, 6 pad, 7 x 5mm SMD. Stability from ±1ppm -30°~+75°C. PECL square wave output. PECL 'F' Group characteristics. Supply voltage 3.3 Volts Less than 1ps phase jitter, ideal for SONET, xDSL RoHS compliant requency Range 38.880MHz to 432.0MHz

LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. LVDS 'F' Group characteristics. RoHS Compliant. TCXO with LVDS output, 6 pad, 7 x 5mm SMD. Stability from ±1ppm -30°~+75°C. Miniature 7 x 5 x 2.8mm ceramic SMD package Supply voltage 3.3 Volts Low cost, low jitter for general applications RoHS compliant 'F' Group characteristics. Frequency Range 38.880MHz to 432.0MHz.

A miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Wide frequency range. RoHS compliant. This part has been revised, for new designs see EM572T. A miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Wide frequency range. RoHS compliant. Industry-standard SMD package Low phase noise RoHS compliant This part has been revised, for new designs see EM572T

Clipped-sinewave output TCXO in the industry-standard 7.0 x 5.0mm SMD package. Stability from ±1ppm over -30° ~ +75°C. The clipped sinewave output level 0.8Vp-p min. into a 10k Ohms //10pF load. Clipped-sinewave output TCXO in the industry-standard 7.0 x 5.0mm SMD package. Frequency range: 10MHz to 27MHz Close tolerance stabilities from ±0.5ppm over 0° to +50°C ±1ppm over -40 to +85°C Very low power consumption Supply Voltage: +2.5, +3.0 or +3.3 Volts Stability from ±0.5ppm 0°~+50°C. The clipped sinewave output level 0.8Vp-p min. into a 10k Ohms //10pF load. Frequency Range 10MHz to 50MHz

HCMOS square wave TCXO With ultra-low current consumption, from 2.3mA. The part is packaged in a 7.0 x 5.0mm SMD package. Stability is from ±1ppm -30°~+75°C. Part is RoHS compliant. HCMOS square wave TCXO With ultra-low current consumption, from 2.3mA. Miniaturized 7 x 5mm SMD package Consumes less than 4mA at 20.0MHz with 3.3V supply Low phase noise RoHS compliant The part is packaged in a 7.0 x 5.0mm SMD package. Stability is from ±1ppm -30°~+75°C. Part is RoHS compliant

A miniature 4 pad SMD TCXO (EM572T) or VCTCXO (VEM572T). Stability from ±0.5ppm. HCMOS square wave output. RoHS compliant. For a CMOS TCXO from 40MHz to 156MHz see part EML572T. A miniature 4 pad SMD TCXO (EM572T) or VCTCXO (VEM572T). Stability from ±0.5ppm. HCMOS square wave output. Frequency range: 1.25MHz to 40.0MHz Supply voltage 2.5, 3.0 or 3.3 Volts For a CMOS TCXO from 40MHz to 156MHz see part EML572T