Handling%20-%20machines%20%20&%20%20equipment - Import export

Developed for feeding systems of poultry farms, PX/PPC series are preferred thanks to their silent and trouble-free operations and lightweight structures.

Helical and worm gear units with 90° input and output axis range. Casing with feet, flange F options Rigid case structure and suitable for heat transfer. System resistance calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options may be provided (Coupled motor, IEC, PAM, W, Servo motor connected, ...). Different output options available (Solid shaft, Hollow shaft, With shrink disc, ...).

Offered for drive systems with low moments and regular loads, worm gear units stand out with their light, modernly designed bodies with high strength, as well as silent operation.

PCS series gear units of PGR Drive Technologies serving up to 60 tones of capacity are optimum solution partners for crane industry thanks to their silent, compact bodies and easy maintenance features.

PYK series products that have wide reduction ratio and high resistance against heavy and variable loads in horizontal, vertical and inclined feed mixing systems provide optimum solutions in TMR systems for cattle and small cattle livestock facilities.

PGR Drive Technologies provide solutions with PEX series extruder systems with high axial and radial forces thanks to their rigid, strong case and wide reduction ratios.

The rotation of high speed shaft should not be more than 1500 rpm; The circumferential velocity of gear tranmission should not be more than 20 m/sec; The temperature of work environment should be -40-45°C. If it below 0°C, before start, the lubricating oil should be pre-heated to above 0°C. This speed reducer can be run at clockwise and counterclockwise direction.

The most important feature of the PCD series, which has a different design from traditional gearboxes, is that the drive elements transmit the movement by rolling over each other, instead of the friction movement of the gears with each other as in normal gears.

These series which are provided in foot- (PA) and flange (PF) mounted options serve up in drive systems that need wide reduction ratio and maximum 26900 Nm of output moment.

Helical bevel gear units with 90° input and output axis range. Casing with feet, flange F options. A rigid structure in case. System resistance calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options may be provided (Coupled motor, IEC, PAM, W, Servo motor connected, ...). Different output options available (Solid shaft, Hollow shaft, With shrink disc, ...).

PD / PM series parallel shaft mounted gear units produced with hollow shaft or solid shaft are commonly preferred in conveyor drive systems.

PGR Drive Technologies provide solutions in planet gear units with PTO, IEC, parallel shaft input options which offer high reduction ratio in small volumes in drive systems with heavy and variable loads thanks to their compact and modular structure up to 850000 Nm of moment values.

Industrial type gear units operate especially under heavy working conditions, have rigid case, bear high moments up to 480000 Nm and stand out with silent operation and easy maintenance features

Preferred in various transfer systems thanks to their wide reduction ratio, compact structure and easy maintenance, PGR Drive Technologies Pt/A Series gear units can be driven with belt-pulley or chain mechanisms.

The twisterchain product line offers a wide range for circular movements and is available in four sizes. Modular in width and radius, therefore flexible in applications where rotary and spiral movements up to 360° and more with high loads and smooth operation are required. The twisterchain applications are available with guide trough, which has the following advantages: guidance of the energy chain, reduced abrasion of the energy chain, optimal operational smoothness, rotation angle up to 360° from stock. - Strong, high fill weights, smooth operation, weight-optimised - Rotary speeds up to 1m/s and more - Circular/spiral movements up to 360° from stock (up to 400° upon request) - Cable-friendly, smooth interior crossbars openable along the inner and outer radius - Successfully tested for over 1 million cycles in the igus laboratory

Drum clamp to be installed on the forks of the forklift. The clamp is made of a sturdy steel frame and fork mounted with a forklift, the locking is ensured by two screws and a chain with safety catch that prevents the clamp from sliding off the forks. The coupling and release system of the drum is automatic and the operator must not get off the forklift. It is sufficient to bring the clamp close to the drum and lift. Closing of the clamp is favored by the weight of the drum; to unhook it, simply place the drum on the floor. The clamp cannot be used to handle empty drums. The clamp is suitable for 210 lt metal drums with a diameter of about mm. 580. The pliers can also lift plastic drums with edges but only of the type that can be seen in the picture.

WHEELED BASES FOR DRUMS SERIES SD FP55 (DRUMS DIAMETER mm. 580/600) Reinforced wheeled bases for the transport of drums with a diameter of about 610 mm. and weight max. 250 Kg. The SD Series enables a high stability and security because it has wheels polyurethane installed outside the structure. The wheeled bases are available in yellow. Available models: SD FP55B wheeled base made of painted steel SD FP55D wheeled base made of stainless steel SD FP55F wheeled base made of painted steel - reinforced

LF FP800 – TILTER FOR DRUMS SUITABLE FOR FORKLIFT The tilter for drums LF FP800 it has fork mounted structure with elevator cart and is suitable for lifting and emptying 200 liter metal drums with 580-600 mm. diameter. The device is complete with bracket for locking the drum, frontal safety rod and bevel gearbox with handwheel for rotation. More about CE certification The equipment is supplied complete with CE certification and manual of use and maintenance related to the sole subject of the sale. Before using the machine, the customer must check that the elevator cart on which the object will be installed is in compliance with all regulations, including lifting combination and equipment. It is also responsibility of the customer to inform of any special tests that must be performed before use. By purchasing the customer, he/she becomes aware of this information and, where necessary, undertakes to test his/her elevator before using it with the mounted equipment.

CART DRUM MOD. DE FP 450 The trolley for drums DE FP 450 allows a single operator to lift and carry in a fast and secure way metal drums with a maximum weight of 300 Kg. The cart has an automatic hook grip with height adjustment, rubber wheels, roll-back support, handle with rubber grips. Suitable for use on smooth floor. Operation: The operator must approach the trolley to the full drum by inserting the bottom of the catch hook under the rim of the drum and levering it with the foot on the bottom of the trolley, tilting it slightly to lift the drum. Thanks to the weight of the drum, the hook automatically snaps and locks the drum firmly. To unhook the drum simply place the base of the drum on the ground, pull the bottom of the trolley toward it, then disengage the bottom of the catch that automatically reopens. In the case of empty drums, the operator must manually apply a pressure on the drum to allow hook activation.

Clamp for drums to install on the forks of the forklift. The clamp consists of a sturdy steel frame and fork mounted on a forklift. Operation: The connection and disconnection of the drum is automatic and the operator should not fall from the cart, simply push the caliper to the frame, apply light pressure and lift. The clamping device is extremely safe because it is constituted by a double hook, the release is done automatically by placing the drum to the floor. The trolley is suitable for lifting full drums, it is possible lifting the empty drums by pressing it over a pressure to hook the trolley. In the case of empty drums, a second operator must manually apply a pressure on the drum to enable the hooks to be activated.