Inks - Import export

Water based, pigment ink for DTF (direct to film) printing. ✔ Fine pigment dispersion ✔ OEKO-TEX certified ✔ Great prices ✔ Intense colors ✔ Low clogging ✔ Approved for EPSON i3200-A1 print heads Colors: CMYK+White, Spot colors, fluorescent colors Our DTF inks are tested and approved for DTF printing. With particles smaller than 0.3μm they can be used in a wide range of print heads. The unique formulation creates a perfect balance of color density and drying behavior. By this we make sure that your print heads stay open for as long as possible without sacrificing the opacity of your prints. With spot or fluorescent colors, you can run these inks in 2, 3 and 4 head printers to increase your color gamut or add special effects. The overall compatibility of these inks makes them a great and affordable partner for many adhesives powders and films.

The disadvantage of traditional textile covered rollers is that they do not assure uniform inking jobs at high printing speeds. Hannecard has developed a solid alternative: DoseRight, a laser-engraved 60 Shore A rubber roll covering. Different laser engraved patterns (squared, pyramidal, honeycomb, scattered, etc.) are available, in function of inking type and application. Laser engraved inking rollers assure a uniform and correct inking of the printing roll, avoid ghost image appearance and reduce the ink spillage. The advantages of DoseRight include: Inking rollers No cell filling No lines No ghost image

REA JET offers various ink and primer supplies - the right solution for every customer requirement. Always good to go - industry suitable ink and primer supply units — Highest chemical resistance — Best mixing performance for inks and primers — Avoidance of sedimentation — Greater range through higher filling capacity — Flushing function optionally available — Automatic or manual operation — Comprehensive accessories — Over 500 inks and primers

Printa company was founded in 2003 and is specialised in textile screenprinting.We use precise 2 manual presses (6 and 4 colours) with micro registration made in USA as well as quality textile inks made in Italy.We take small orders from 10 t-shirts to thousands.The price depends on the quantity,the printed colours,the size of the image and the colour of the t-shirts.We guarantee for the quality of the printing.The inks are printed directly to garment and cured with infrared heater so they cannot be washed out.Please visit our website:www.printadesigns.com and have a look at the numerous clients and the pictures we have added to the gallery. Since 2017 we offer sublimation printing as well on t-shirts,mugs,etc.,screen printed heat transfers for different types of textile decoration.

In most cases our treatment process is composed of three phases. The first size reduction operation takes the pigment and colour particles down to D97 at 80µ. A second phase of microselection often occurs before the final stage of micronization

» Plastoprint phthalate free is opaque plastisol printing inks which contains PVC but free of phtalates. » Easy to get soft handle and opacity in both manual and automatic printing systems . » They give excellent results in High density(3D), rubber, foam(puff), transfer printing applications. » Plastisol inks in Plastoprint series do not contains phtalates or heavy metals.

» Ecoplast Pvc free is the only plastisol printing inks that do not contains phtalates and 100% ecologically organic GOTS certified product. » Plastisol inks in Ecoplast series meet ecologic standards with all printing effects including direct, high density(3D), foam(puff), rubber. » Inks with high opacity and fastness can be used in both manual and automatic systems of printing. » Plastisol printing inks in Ecoplast series cover the requirements of international brands and standards like Inditex RTM, Oekotex 100 Class 1,REACH,Nike,GAP,H&M. » Plastisol inks of Ecoplast series are meeting the high ecological standards, should not be used with other plastisol or water-based products and additives.

Abrasion resistance/Zirconia ceramic ring for sealed ink cup/pad printing/innovacera 1. Introduction: Round Zirconia ceramic ring is used for a Ever Bright pad printing ink cup machine, electronic control, lighting and electrical temperature control and other industries.Zirconia ceramic scraper ring is also used for thermostat,technical ceramic,temperature control. The temperature controllers,manufactured with Zirconia,have revolutionary breakthrough if compared with traditional plastic parts.They are highly improved in strength,insulation performance,heat resistant performance,especially sensitivity to temperature Innovacera is offered Yttria Tetragonal Zirconia Polycrystal(Y-TZP), there are many applications of Zirconia ceramics in the chemical and petrochemical industries. They provide economic payback in the way of reduced maintenance and down time. Zirconia ceramics is also becoming the material of choice for components in healthcare applications.

This water based printing ink is developed for coated and glossy surfaces like pizza box, label printing, paper bag printing which requiring high print quality. Suitable for flexographic printing. PROPERTIES It has superior performance in high quality printing with its high brightness and coverage. It is designed to provide high coverage on absorbent surfaces. Provides high color strength in printing. It dries to allow high speed printing applications. APPLICATION Used as water based ink on flexographic printing machine. Mix well before use. Printing viscosity is 18-22 s (Din cup N°4). The product should be diluted with water. Packaging is 20KG tinplate bucket. * The information on this technical data sheet is based on our general experience.

The MOYU Ball Pen feels great in the hand and provides a super smooth writing experience. The pens contain the original Frixion ink and came out on top in the test against 20 other erasable pens. Quality assured.

The MOYU Clicker Pen is filled with the original Frixion ink, making it super easy for you to erase and rewrite your notes.

The MOYU Clicker Pen is filled with the original Frixion ink, making it super easy for you to erase and rewrite your notes.

The MOYU Clicker Pen is filled with the original Frixion ink, making it super easy for you to erase and rewrite your notes.

The MOYU Clicker Pen is filled with the original Frixion ink, making it super easy for you to erase and rewrite your notes.

Original ink rolls in Meto quality are available for all Meto hand-labelers with standard ink (paper / indoor use) or with UV-resistant ink (plastic labels / outdoor labeling).

The FPA2-PRO marker is the most professional version of inkjet markers. It allows to write up to 12,7 mm on several lines of printing, even on non-porous surfaces (boxes, bottles, glossy cards, jars, etc.). It can reach a speed of 72 m/min. It allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 12,7 mm. The minimum printing height is about 2,7 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. The marker is however equipped with an automatic nozzle cleaning system Thanks to the SD card (included in the package) you can save up to 999 messages, setting them in any size (maximum 12,7 mm) and any Word font format.

PORTABLE INKJET MARKER MOD. FPA2-SMART MOB - MAXIMUM PRINTING HEIGHT 12.7 mm New portable inkjet marker, suitable for marking on porous, semi-porous (boxes, cardboard boxes) in different work stations. Allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on 4 lines with a total height of 12.7 mm. The marking speed is set directly on the marker keypad and you can always write accurately and without deformation of the characters. The cartridges are independent and directly in contact with the print head. The marker is equipped with an automatic nozzle cleaning system so in case of very long machine stops, there is no danger of blocking, but simply replace the exhausted cartridges without further maintenance. The message to be printed can be set by PC in any Word font format. To use it, simply save it on the SD card included in the machine.

The ONE inkjet marker is a professional model but very simple to set up and use. It is suitable for marking mainly on porous (boxes, carton boxes) and semi-porous surfaces (with special cartridge). It allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 25,4 mm. The minimum printing height is about 5,4 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. Following tests, unlike other cartridges, they proved to be working even after leaving them uncovered for weeks. The marker is however equipped with an automatic nozzle cleaning system. Thanks to the SD card (included in the package) you can save up to 999 messages, setting them in any size (max 25,4 mm) and any Word font format.

The SMART inkjet marker is the simplest professional model in the series. It allows printing up to 12.7 mm on porous surfaces (boxes, cases, etc.). It allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 12.7 mm. The minimum printing height is about 5.4 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. Following tests, unlike other cartridges, they proved to be working even after leaving them uncovered for weeks. The marker is however equipped with an automatic nozzle cleaning system. Thanks to the SD card (included in the package) you can save up to 999 messages, setting them in any size (maximum 12,7 mm) and any Word font format.

Laser segmented ink fountain blades

Increase consistency of ink flow within printer Precisely controlled ink delivery is critical for consistent ink flow within printers. Porex creates customized ink delivery wicks, vents and retention media that ensures the proper functionality in even the most complex printer systems. request sample ask an engineer

Deliver precise control of ink absorption and release As a global leader in inkjet printer media, Porex creates the materials with the highest capacities and ink release rates in customized shapes and sizes to meet your specific printer system’s needs. Our ink reservoir media can be offered in complex geometries and various gradient density configurations for precise control of ink absorption and release to: Deliver the highest release rate on the market – Customized HRM (High Release Media) materials release from 80% - 90% of your ink for maximum cost effectiveness and customer satisfaction. Absorb and deliver high ink capacity–Ink management components can be customized in various shapes and sizes based on your printer’s design needs. request sample ask an engineer

As AYBERKSAN Kalıp Sanayi, we make the most suitable designs in line with the demands of our customers and start production after receiving their approval. We have made the ink bottle cap mold.

A prerequisite for the adhesion of an adhesive or coating to a surface is wetting. For wetting to take place, the surface energy of the substrate must be greater than that of the coating. In particular, very many plastics have a very small surface energy and are correspondingly difficult to bond. Often the aim of a plasma treatment is to make a surface wettable and bondable. The wettability can easily be tested with test inks. Diener electronic supplies a test ink set with 8 liquids with surface tensions between 30 and 73 (105) mN/m suitable for most practical applications. There is also a set of 23 test inks, with additional gradations between 30 and 73 (105) mN/m.

Machine suitable for closing bags mm height. 200 mm. 320 and max weight. 5 kg. The welding system belt PTFE allows closing bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc.. The temperature is controlled by an electronic controller and thespeed is adjustable. The distance between the sealing and the edge of the bag is 10 mm. The sealing head is adjustable in height. The machine is equipped with a marker rotary heat and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy readingand comes complete with photocell to make a mark at the desired point.

Heat transfer films for easy to peel heat transfers. ✔ High ink uptake ✔ Nice, matt finish ✔ Soft feel ✔ Great price ✔ Anti-static ✔ Thermally stabilized ✔ Hot or cold peel! Our instant-peel film for DTF (Direct to Film) printing is your best bet for a safe and easy process. It comes with many layers of coating which guarantee a great ink uptake and an easy release. Furthermore, the transfer film leaves you to choose in-between a quick hot peel straight after pressing or to peel it cold. The anti-static feature of this film makes sure that no hot-melt powder particle sticks to the unprinted area, giving you a clean transfer result. Additionally, the film is matt on both sides so that the print won't stick to the film once rolled up and to make sure, that it can be processed perfectly in your DTF printer and transfer press.

Machine suitable for the closing of bags with height, mm. to 150 mm. 270 and max weight. 3 kg. The welding system with belts PTFE allows for closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is adjustable from 0-250° C. and the feed speed is adjustable from 0 -12 mt. / min.The welding head is adjustable in height and the distance between the welding and the edge of the bag is 10 mm. The machine is equipped with rotary solid ink marker and interchangeable characters (up to 20 characters with a height of 5 mm.), The system works with inked rollers for easy management and is complete with a photocell to do the marking in the desired location. This model is constructed in the standard version, that is, the advancement of the product occurs from right to left.

Ramirex - Plasticos de Agueda, Lda is a Portuguese company with 40 years of experience in the plastic injection field. We produce our products using our own moulds and exclusive items using our client's moulds.Visit our website to get our catalogue.

Ramirex - Plasticos de Agueda, Lda is a Portuguese company with 40 years of experience in the plastic injection field. We produce our products using our own moulds and exclusive items using our client's moulds.Visit our website to get our catalogue.