Insulation - injection materials - Import export

Bossong injected anchors with sock and Presstec grout with RBOS bars. Injected multibars anchors with sock and Presstec grout with RBOS bars. Stainless steel reinforced bars. On demand carbon steel bars.

Bossong injected anchors with sock and Presstec grout with TBOS bars. Stainless steel threaded bars. Couplers, turnbuckers, nuts, standard end and architectural end plates.

Bossong injected anchors with sock and Presstec grout with GBOS bars. Stainless steel bars fully threated. Stainless steel smooth bars. Couplers, turnbuckers, nuts, standard end and architectural end plates.

Over the last recent years a greater and greater attention to the existing building heritage and to the activities aimed to the preservation of both buildings with high architectural value and those belonging to the category of traditional buildings has been developed. Among the restoring interventions of existing buildings there are often strengthening works, in which one provides the embedment of metal anchors into masonry or wood stitching of cracks, bonding between reinforcement metal anchors and the existing structures, tierod or reinforcement ring put to contain the action of pushing elements such as arches and vaults, connection between floor slabs and outside masonry walls, embedding of anchorages inside the walls in order to increase their resistance and the global behaviour of structures also for seismic upgrading.

The need to begin studies in the field of injection anchors is testified by the stronger and stronger request by the designers for instruments and guidelines for the design of anchors and their application in the strengthening of masonry structures. One of the main aims of research is just that of supplying design recommendations which may be of help for designers and technicians working in this field. Laboratory tests In collaboration with the Civil Engineering Department (DICATA) of the University of Brescia a set of laboratory tests were carried on masonry samples in order to check the capacity of the injection anchors with sock in terms of adherence and mechanical interlocking with the substrate. The execution, during the research activity, of a great number of tests has lead to the definition of parameters that are fundamental for the design of injected anchors with sock, as the bond strength at the steel barinjected grout interface an at the injected groutsubstrate interface.

Highadhesion epoxy resin for heavyduty fastenings for use in different base materials as concrete, solid masonry and wood. This Bossong resin can be used also with wet concrete and flooded hole including underwater fixing (reduction of the recommended loads of 20%). Suitable for electrically insulated fastening. It has longterm resistance to hydrolysis. Excellent for applications with reinforced bars. Thixotropic consistency. The resin, due to its strong adhesion value and the ease with which it penetrates holes and hollow areas, permits secure fixing without expansion and so without stresses in the base material. It does not need premixing, the resin and hardener are only mixed during extrusion in the special mixer. It can also be used for repair and refilling. SERVICE TEMPERATURE RANGE Between 40°C /+ 40°C with T°max long period of 24°C and 40°C/+80°C with T°max long period of 50°C (ambient temperature after installation).

There are certainly technical and theoretical reasons determining whether an anchorage should be realized with resin or grout. However, in the practical application it is not so easy to define such limit, because of many factors, such as the compatibility with the original materials or simply feasibility problems during the execution. Significant parameters for choosing the type of anchors are type of substrate anchorage length hole diameter setting time and fixing mode waiting times for the loading of the anchorage The thixotropic consistency of the resin, that is useful to prevent from excessive spreading in the interstices of historical buildings, complicates the deep extrusion stage and limits the anchorage length in comparison with the application where the injection is realized with grouts.

Cooperation with the designer The characteristics of Bossong anchorages are defined on the base of the specific parameters of each single project, as well as the dimensions of the hole they must be embedded in, that depend on the type of material constituting the substrate. The change of information relating to the knowledge of the building’s state of preservation and of the aims of the provided interventions, drawings and pictures, the pattern of cracks and deformations, as well as the design of interventions, are very important to define the type of anchor that better fits the application and also to evaluate the intervention from the economic point of view. Tests in place The need to give to design engineers the possibility of an assessment of the behaviour of injected anchors in a particular application and in a specific setting has lead Bossong to equip its technician with a mobile instrumentation that allows the execution of onsite tests.

Bossong anchors are embedded into boreholes made in the masonry to be strengthened through drilling machines with diamond bits, that work only with rotation movement in order to avoid vibration and percussion effects on the masonry. Depending on the type of masonry and on the particular setting of the site drilling works can be done with water or air cooling or with techniques that help to avoid the spread of cooling liquids. The choice of the drilling technique is decisive when works are done in unique and precious settings where painting, ancient plasters and stuccoes are present and have to be saved and preserved. The borehole diameter is designed according to anchors size it is usually about three times the steel bar diameter; the length of the anchor is another parameter to be evaluated for the right choice of the borehole diameter.

Bossong plastic sleeves with thread ends for continuous protection system; nylon insulation washer; metallic pipe fittings drilling machine/BOS TP plastic sleeves.

Injection foams are liquid resins that can be injected into all gaps from capillary cracks to large cracks in concrete structures. It can be used in areas such as crack repair and building consolidation, especially in waterproofing, by converting from polyurethane liquid to solid by creating chemical reaction in seconds after injection process. Injection foams offer the possibility to apply in different forms for different purposes, from hard to very soft.

The steel pipes used in the manufacturing of pre-insulated pipes are manufactured longitudinally welded (ERW) or spirally welded (SAW) in accordance with the norms required by the standard TS EN 253 or customer demands. Pipes comprise three basic materials. Carrier pipes are established as steel, copper or plastic based according to the properties of the carried fluids. Casing pipes are manufactured from high density polyethylene (HDPE) raw material, with UV resistance, 100% waterproof and with online corona. PUR ( POLYURETHANE INSULATION MATERIAL) that is injected between the carrier pipe and casing pipe provides heat insulation besides enabling two pipes operating as one pipe by bonding them together.

Ceiling sound insulation is done to prevent air circulation sounds coming from the upper floor to the rooms on the upper floor. Floor sound insulation is done to prevent vibration sounds coming from the upper floors or to prevent noise-making activities downstairs from being reflected to the upper floors. For example, walking sounds upstairs may cause discomfort downstairs. For this reason, floor sound insulation should be made at the point where the sound occurs. The reason for sound insulation on ceilings may only be the sounds propagated in the air, such as speaking sounds. Since vibration-related sounds can travel downstairs through the walls as well as the ceiling, you should block the sound at the point where it occurs.

Radio room sound insulation is a special sound insulation system used in the production of radio programs. This system ensures a high-quality broadcast recording by preventing outside noise and other disturbing sounds from entering Acoustic regulation and sound insulation in radio rooms are necessary for better sound quality, work environment, focus and performance. For these reasons, acoustic regulation and sound insulation in radio rooms are very important and indispensable for a quality radio broadcast.

Introducing our high-quality and versatile GEOMEMBRANE, a revolutionary solution designed to address a wide range of environmental and civil engineering challenges. Crafted from durable and flexible synthetic materials, our GEOMEMBRANE offers exceptional strength, resilience, and impermeability, making it an ideal choice for various applications.

Sound Comfort Extra DFIR plasterboard, consists of higher density gypsum core reinforced with special additives and fibers, enclosed between paper for superior sound and fire protection. Application: • Ceiling • Wall • Areas with higher requirements for sound insulation and fire protection. Ideal for indoor use in areas with normal humidity up to 60% Advantages: • Enhanced sound insulation performance • High density of gypsum core for better sound insulation and stability Type D • Increased resistance to high temperatures Type F • Impact resistance - type I • Exceptional strength and durability - type R TECHNICAL INFORMATION: Thickness (mm) Width (mm) Length (mm) Weight (kg/m2) Sheets per pallet 12.5 1200 2000, 2600 12.00 40 pcs 15 1200 2000 14.00 40 pcs

Our Thermo bags work perfectly for shipments of refrigerated and frozen products. Our covers are water resistant, heat reflective and recyclable. The bags are easy to use and to place in a box and take up little space in your warehouse in volume. The bags are 75 cm high x 50 cm wide and 8 mm thick

EXPANDED PERLITE (2 Plants ) Filter Aid Perlite Cryogenic Perlite Construction Perlite Agricultural Perlite Textile Perlite PERLITE ORE for various industries (Production capacity 300.000 mt annually ) 0,074-0,30 MM 0,15-0,60 MM 0,60-1,20 MM 1,20-2,40 MM PROJECTS COMPLETE PERLITE EXPANSION PLANTS INSULATION PROJECTS (TANKS Natural Gas, Oxygen, Nitrogen & COLD BOXES )

Thermal, Sound and Acoustic insulation felts produced from %100 recycled polyester fiber by needle punching with non-woven technology. It has a high thermal conductivity value (λ 0.033) , Impact sound reduction 30 dB, up to 45dB sound insulation, breathing material (µ 1,1) , no harm to human health and the environment. Antibacterial. It is not affected by water. It provides heat and sound insulation at the same time. Has moisture resistance. Long life. Does not dust, It does not emit particles. It does not cause discomfort during its application. The product with Oeko-tex certificate, which should be in baby clothes. It has successfully passed the Reach and Rohs tests. The fire class is Bs1d0 . It does not conduct flames, does not drip, does not emit toxic gas. They are light, thin products that do not take up space. They are environmentally and human-friendly felt products.

Thermal, Sound and Acoustic insulation felts produced from %100 recycled polyester fiber by needle punching with non-woven technology. It has a high thermal conductivity value (λ 0.033) , Impact sound reduction 30 dB, up to 45dB sound insulation, breathing material (µ 1,1) , no harm to human health and the environment. Antibacterial. It is not affected by water. It provides heat and sound insulation at the same time. Has moisture resistance. Long life. Does not dust, It does not emit particles. It does not cause discomfort during its application. The product with Oeko-tex certificate, which should be in baby clothes. It has successfully passed the Reach and Rohs tests. The fire class is Bs1d0 . It does not conduct flames, does not drip, does not emit toxic gas. They are light, thin products that do not take up space. They are environmentally and human-friendly felt products.

Brand Name: Knauf Product Name: Knauf Earthwool 044 Name: Knauf Earthwool Rolls Certificate: ISO 9001 CE Size: 1200x10000mm Thickness: 50x140mm Application: Interior - Roof Material: Mineralwool Type: Insulation Material Model Number: Earthwool 040 Warranty: 5 Years Item: Value

TempGuard box insulation is an innovative and sustainable solution for shipping temperature-sensitive products such as fish, meat and medicines. The material consists entirely of paper and insulates comparable to EPS material (styrofoam). TempGuard insulation sheets can be disposed of with the old paper after use! As an added advantage, these insulation sheets protect the products against shock and moisture. For optimal results of temperature retention, use 2 TempGuard insulation pads per box. Box dimensions 300x300x300 mm

Superglass Superwhite 42 is a glass mineral wool blown loft insulation with a water repellent additive to enhance it resistance to moisture. Installed by professional insulation contractors to a minimum density of 16kg/m3 the product will have a declared Lambda 90/90 value of 0.042W/mK

Do not hesitate to contact us for your requests for industrial and HVAC insulation tools, insulation rockwool, foamglass, aluminium foils etc... www.soliso.fr screiche@soliso.fr +33.6.76.18.78.74 (Whatsapp)

Injection, bi-injection and overmolding of technical and appearance parts Series from 100 to 1 000 000 parts Single and multi-cavity injection and overmolding Injection of structural parts Injection of appearance parts Injection of transparent parts Overmolding of inserts Finishing: painting, surface treatment,... Metrology follow-up