Low-pressure compressors - Import export

OIL FREE 2 stage PISTON LOW PRESSURE Air Solutions More info More info More info More info More info More info More info Move your cursor over a bullet to get more info AF Piston Compressors : Simple and Robust DESIGNED FOR LONG LIFE and RELIABILITY Piston Rods are made of a high resilient stainless steel and chromium plated to provide a hard wearing surface. Cross heads The ratio between the connecting rod length and crank radius (nearly 5) and the large pressure lubricated area of the crosshead and guides ensures optimum life. Connecting rods The white metal connecting rod main bearings are inherently long life items. All bearings are pressure lubricated by a gear driven pump. Crankshaft Is supported by two self aligning bearings having two rows of generously dimensioned rollers to ensure perfect alignment. Connecting rods The white metal connecting rod main bearings are inherently long life items. All bearings are pressure lubricated by a gear driven pump. Cross heads The...

ESSLA80 Series Liquid Accumulators are system protectors, designed to be placed the compressors low pressure line. The main purpose of the ESSLA80 is to prevent refrigerant to reach to the compressor in liquid state. By the internal design, ESSLA80 Liquid Accumulators, can prevent fluctuations / irregularities, during the “off-cycle” and Liquid Hammering. Also it promotes the oil return to the compressor. At the first assembly stage, it is advised to add sufficient amount of oil in the liquid accumulator. For the special internal designs, different equipment bearing or different designed products, please refer to the Special Productions section or please contact us. Properties : – ESSLA80 Series has ODS solder connection, – Full protection at every stage, – Working temperature range -40°C, +70°C

ESSLA Series Liquid Accumulators are system protectors, designed to be placed the compressors low pressure line. The main purpose of the ESSLA is to prevent refrigerant to reach to the compressor in liquid state. By the internal design, ESSLA Liquid Accumulators, can prevent fluctuations / irregularities, during the “off-cycle” and Liquid Hammering. Also it promotes the oil return to the compressor. At the first assembly stage, it is advised to add sufficient amount of oil in the liquid accumulator. For the special internal designs, different equipment bearing or different designed products, please refer to the Special Productions section or please contact us. Properties : – ESSLA Series has ODS solder connection, – Full protection at every stage, – Working temperature range -40°C, +70°C, – Maximum working pressure 40 bar, – Compatibilty with Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants

Material: A356, A360, A380, ADC12 Process: Sand casting + machining Gravity casting + machining Die casting + machining Low pressure casting + machining Application: Air compressor Pumps Concrete plant equipment

Frcgen* R-22 is an HCFC refrigerant that operates with high pressure but low compressor displacement. Frcgen# R-22 is popular in residential, commercial and industrial applications. Frogen# R-22 is also used as an intermediate to produce fluoropolymers and as a blowing agent in rigid foam applications.General InformationASHREA ft R-22Class HCFCRefrigerantT Pure FlutdTypeLubrication Mineral OilCharging _ .....The system must be evacuated before charging.Use of R-22 is being phased out glcoally- consider the use of Frogen# R407C, Frcgen* R422D. or FrogenG R507. Nonflammable at ambient temperature and pressure, ether-like smell. Always use in accordance with the Material Safety Data Sheet <MSDS).

Real time x-ray system for low pressure compressors and stators inspection The AIS203RD has been created to inspect metallic and non-metallic components in all sorts of industry but mostly in Aeronautics. Every single element of the installation is configurable and highly flexible to be used in different applications in digital radiography. The system is built around a robot for the detector/source movements in order to provide the user with every possible inspection angle that could be required and that can be fitted on the main manipulator. All sequences of inspection can be manual with a digital axis manipulation or automated with the Inspection Suite of software, allowing the user to simply load the part inspection process and press start. It is not only automated but can also be installed with the ADR module which will considerably increase the efficiency and speed of inspection.

The Drallim Dehydrator type 12269 is an energy saving integrated unit for supplying low pressure dry air to, for example, telephone cables, waveguides and aerial feeders. Design emphasis is on reliability and low maintenance given the critical role of this unit within an operator’s system. These products provide a continuous supply for dried air, at pressure, to maintain the operational integrity of cable systems and broadcast transmitter feeds. This very high-performance unit is home to two 3/4HP compressors. This unit can produce more than 185 cubic feet per hour, this is regulated and split between up to 80 outlets, each with its own flowmeter for a visual indication of each cables demand for air. Mains Failure, High Humidity, Low Output Pressure, High Output Pressure, Compressor 1 and 2 Duty indicator. It’s low noise level of around 60dBA is quiet enough to allow it to be sited in manned areas.

Most advanced ecological & environmental friendly machine fully automatic & pneumatic operation, Loading door 500 mm for easy loading Ecological friendly – no external contamination solvent containment, filling, discharge and venting are completely sealed Adjustable Solvent Level with Computer closed circuit with heat pump compressor Freon R407a LOW NOISE – Scroll technology - Advanced super fast & efficient drying circuit Fridge gauges and pressostat group (High & low pressure) , with safety valve, soundproof compressor Advanced super fast & efficient drying circuit with automatic electronic temperature adjustment self cleaning fully automatic tank with frontal windows + S.S. insert Distillation Unit in stainless steel with internal inspection light & service hatch Ergonomic shape for faster distillation and avoid overflow – fully hermetic pressurized distillator Continuous OR fractional distillation

100 - 1800 CFM / 170 to 3,050 m³/h The GARO line of liquid ring compressors expands the capacity and pressure ranges of the Nash line to meet the ever growing requirements of our customers. Found primarily in petroleum refineries and chemical plants, these rugged and reliable compressors handle highly toxic, explosive and corrosive gases in applications such as flare-gas, chlorine and Vinyl Chlorine Monomer (VCM) recovery. The GARO line, available in single and two-stage designs, comes in: cast iron, stainless steel, carbon steel, spheroidal cast iron, 316 stainless steel, duplex stainless steel, and Hastelloy or Titanium on select models. Together with other NASH liquid ring compressors, including the HP-9, the 14 GARO models form the NASH core compressor product line, which provides compression greater than 200 psig (15 Bar abs). Low pressure compressors are available to 30 psig (3 Bar abs), and 20,000 CFM (34,000 m³/hr). As a result, NASH offers the widest pressure and capacity ranges of liquid ring compressors available worldwide.

1800 - 2600 CFM / 3,050 to 4,400 m³/h Found primarily in petroleum refineries and chemical plants, this rugged and reliable compressor handles highly toxic, explosive and corrosive gases in applications such as flare-gas, chlorine and Vinyl Chlorine Monomer (VCM) recovery. Together with the 14 new GARO models and other NASH liquid ring compressors, the NASH HP-9 compressor form the NASH core compressor product line, which provides compression greater than 200 psig (15 Bar abs). Low pressure compressors are available to 30 psig (3 Bar abs), and 20,000 CFM (34,000 m³/hr). As a result, NASH offers the widest pressure and capacity ranges of liquid ring compressors available worldwide.

Low pressure screw air compressor series is a new compressor produced according to the national policy of energy saving,emission reduction and environment protection.It changes the traditional compressor with relatively high pressure.It transfers the compressed air after pressure reduction to the air consumer,which waste large amounts of energy. The low pressure screw air compressor can be distributed according to the air pressure of the user,to satisfy the process flow with minimum energy.The manufacturing cost of your product can be largely improved.For example,if your process system only needs 3 bar pressure and the used compressor can provide 7 bar, then it can be reduced to 3 bar, It may take two times power to satisfy you process system, you can choose our low pressure screw compressor only to consume half of the power,and the air pressure in the process system can still be ensured, thus realizing energy saving and emission reduction.