Plastic hose clamps - Import export

Work thread – Hose clamp DIN 3017, Form A with hexagon head screws SW 7 S

This clamp made of galvanized steel is a special clamp for connecting medium and heavy-duty hoses to connectors on mobile and stationary units. Bandwidth approx. 20-25 mm. Band thickness approx. 1.0 – 1.8 mm

This clamp is a special clamp for right-lay hoses.

Brake ventilation hoses with visible or concealed wire spiral. The inside is coated with neoprene or silicone, depending on the version. Due to the wire spiral, the hoses are very flexible and can be laid very well even with larger hose diameters.

Complete Hose clamps programme with shaped not perforated band. Clamps width 9 mm and 12 mm. Available in W1, W2, and W4 versions. Furthermore the complete hose clamp series available in W1 and W4 version.

Housing steel. Clamping lever plastic. Threaded spindle grade 12.9. Version Housing nickelplated. Clamping lever, spindle black oxidised. Note Manually operated clamping elements for static clamping tasks. Manual clamping process using the freely adjustable clamping lever. The floating clamp ensure symmetrical application of force onto the rail. Up to 50,000 static clamping cycles (B10d value). In general, a friction connection is created between the clamping element and the the linear guide on the open faces of the profile guide rail so that the ball guide tracks are not damaged. The retaining force is tested on an oil smeared profile guide rail. An adapter plate, dependent on the type of carriage used, is required for height adjustment.

By using clamping levers with integrated clamping force intensifier, the clamping force can be increased by up to 75% compared to standard clamping levers. Furthermore, this product can also be used by persons with limited hand strength (e.g. in rehabilitation) to achieve comparable clamping forces with less effort. Less effort is also needed to loosen the clamping lever. The increase in clamping force is achieved by the integral needle roller thrust bearing, which generates very low surface friction on a rigid contact surface during clamping. The hardened thrust washers are designed for high clamping forces and the bearing with its high load rating guarantees a long service life. The clamped component is permanently protected by the large, stationary contact surface. A washer is no longer required. Due to the modular construction many special designs are available.

The Silcap Hose is the proven superiority of silicone hookah hoses. These hoses are extremely durable, 100% washable and even have a wide range of color combinations to match the set up of virtually any hookah. The wide gauge of the silicone tubing creates a smooth inhale experience with virtually no drag or resistance. This will give your customers bigger clouds with minimal effort. With all those monster clouds of flavor, you are going to appreciate it's washable components. Simply run warm water through the hose and handle to eliminate any lingering flavors. You may even try a mild soap and water solution or lemon juice if you have put off cleaning for a while. Luckily this hose will bounce back to 100% freshness, so the next bowl will be just as pure as the first

Bolt clamp with rubber inlay

NORPLAST® PVC-CU 384 AS is an antistatic suction and transport hose. It’s heavy, has a smooth interior and a grounding wire. Electrical and surface resistance is approx. 10⁹ Ohm

The Master-PUR HX Trivolution is a highly abrasion resistant and vacuum proof PU suction hose and transport hose with reinforcement underneath the spiral. It’s antistatic, microbe-resistant and hardly inflammable according to DIN 4102 B1. Surface resistance is < 10⁹ Ohm.

The Master-PUR H Trivolution is a PU suction hose & transport hose, which is very flexible. It’s antistatic; microbe-resistant and hardly inflammable according to DIN 4102 B1.Surface resistance is < 10⁹ Ohm:

Housing and arm carbon steel. Jaw tool steel. Version: Housing, black oxidised. Arm and jaw tempered and black oxidised.

1. Screw the locking screw into the collar bush, fixture clamp and clamping unit and screw onto the baseplate. 2. The workpiece is clamped by tightening the fixture clamp with a spanner. Advantages: Compact design Quick and easy clamping of components Pull-down effect Drawing reference: 1) Locking screw 2) Collar bush 3) Fixture clamp 4) Clamping unit

NSPV Rigid Electrical Conduit with Belled Ends MD grey and HD orange types Features: UV resistant; Australian Standard; PVC Conduit protects and allows runs of cables and conductors; For routing electrical wiring aboveground or underground.

Connect LP tank gas cylinder to BBQ 12-feet propane tank air hose adapter

PFLITSCH offers various hoses to provide comprehensive protection against mechanical and thermal damage to cables, for example where cables are installed in a corrosive environment or where cables run across the floor between a machine and a mobile operating enclosure. The UNI Dicht® system has suitable solutions in metal and plastic for safe connection of hoses to cable glands in these situations. Clampless variants are most suitable e.g. for the food industry, where no contamination or dirt is allowed to build up. These variants have all the advantages of the UNI Dicht® system, including a excellent seal up to IP 68, superior strain relief values, EMC and Ex-compatibility as well as great versatility of application. Also available are cable glands for Smooth hoses Spring-stiffened UL hoses Hoses with external steel braid Availability in sizes from M6 to M120 and Pg 7 to Pg 29.

The swimming pool hose made by FRÄNKISCHE INDUSTRIAL PIPES boasts extremely high stability and flexibility. It’s a child’s play! Easy to install and easy to handle. It can be separated along the preformed couplings and connected without any difficulty. Due to its chemical resistance and impact strength, the plastic hose can be used for years. Material: PE / – 40°C to + 70°C Other materials on request. Dimensions: NW 32, spacing between couplings 1.1 m NW 38, spacing between couplings 0.5 or 1.5 m Other dimensions on request. Application: Pool bottom cleaners, Pool cleaning brushes, Sand filters, Pumps, Skimmers

Sedir Automotive can supply following hoses varieties; "KRAFT" Hose Varieties "INTERCOOLER" Hoses "FILFLEX" R -2 AT Hydraulic Hose "FILFLEX" R -1 AT Hydraulic Hose "Çelik" Branded Spiral Hoses "Çelik" Branded Air Hoses Twin Welding Hose/twin oxygen gas hose/ acetylene hose Flexible Cable Protection Tube "SEL" Air Hoses "SEL" Compressed Air Hose (Black) "SEL" Heater Hoses (Rubber) "SEL" Knitted Hose (as meters) "SEL" Air Compressor Hoses "RAPRO" Fuel Hoses (with internal fabric) "RAPRO" Fuel Hoses (with external fabric) "R - 9" "HP FLEX" Hydraulic Pipes Polyamide Pipes Turbine Exhaust Hose Standard Type Clear Hoses Single Layer Teflon Hoses Polyurethane Hoses (Blue, yellow, clear, black) Knitted Clear Hoses Clear Plastic Vacuum Tubing (PVC) Clear Spiral Hoses Brake Pipes "SEL" THERMO Pulverisateur Hoses "SEL" Polyetilene Spiral Protector "SEL" KUKA Hose (Canalization) For more varieties please contact with us.

Flexplas designs and manufactures turnkey extrusion lines for flexible PVC hoses reinforced with a spring steel wire and PVC coated spring steel wire helix. That is, we build all the machines and tooling systems that are necessary to produce “PVC-steel wire hose”. We realize this with our technological know-how and perfected craftsmanship. With our complete equipment you can produce a wide range of hose diameters extending from small to larger, according to your need. The complete line is automated, equipped with modern production management systems, and constructed as energy-efficient which includes the use of energy-efficient motors of the latest generation and LED lighting concepts. Furthermore, the machine has been designed to ensure a safe, easy, and time-saving operation after an accidental power failure or emergency stop. This also applies to relevant data items.

-High flexibility -Tangle free performance -Optimal quality These products are known for accurate dimensions, heat resistance, easy installation, dimensionally accurate and abrasion resistance

The hose is an anti-static, heat resistant, lightweight and innovative product with reduced material that conforms to the required standards. Pending approval, Kee Connections will be able to offer CE Certification for customers to add to their own technical documents.

We started roducing very soft hoses that are at the same time very flexible and heavy duty. These hoses have a special mixture of flexible PVC with much additives.

Our corrugated tubes or hoses for windshield and headlamp washer systems can be supplied with one or two mounted Quick connectors as fully assembled units. The Quick connector is a reliable way to connect a corrugated tube to the connecting cuff and allows for quick and easy assembly or disassembly. Our product line includes a wide range of accessories and diameters. Application: Automotive, agricultural machinery and construction engines; for applications in headlight cleaning systems

Fan-Coil Metal Hoses For Water ** / Size: (30 cm- 40 cm- 50 cm- 60 cm- 70 cm- 80 cm- 90 cm- 100 cm- 120 cm- 150 cm- 200 cm) / Hose Type : Standard Corrugated Metal Hose / Hose Material : Stainless Steel AISI316L / Cover : Fan Coil- Rubber Based Speical Inslation / Connection : Female-Female / Male-Female *** Application Areas: Heating ,Air Conditioning Systems / Combi,fan heating connections / Water heaters connections / Floor radiator Connections / Tank connections

Metal Hoses For Water ** / Size: (30 cm- 40 cm- 50 cm- 60 cm- 70 cm- 80 cm- 90 cm- 100 cm- 120 cm- 150 cm- 200 cm) / Hose Type : Standard Corrugated Metal Hose / Hose Material : Stainless Steel AISI316L / Cover : Non-covered / Connection : Female-Female / Male-Female / Standard : EN 10670 *** Application Areas: Heating Systems / Combi connections / Water heaters connections / Room Heater Radiator Connections / Tank connections

Flexplas designs and manufactures turn-key extrusion lines for the manufacture of PVC hoses. We build all the machines and tooling systems that are necessary for production. Flexplas PVC hose extrusion line boasts the latest technology enabling optimum performance at the highest line speeds. The whole extrusion system is controlled via a single master control panel including a large touch screen PLC. With our complete equipment you can produce a wide range of PVC hoses with diameters extending from small to larger, according to your need. Flexplas hose extrusion line helps the customer renovate their line of production for the purpose of increasing productivity, quality, and traceability with the contemporary design and fully controlled unit with or without the operator. The complete line is automated, equipped with modern production management systems, and constructed as energy efficient.