Special steels for tooling - Import export

EAF+LF+VD+ESR ROUND AND FLAT BAR

Tapped cylindrical pins are chiefly used in blind holes. The milled flat prevents air compression in blind holes. The tapping makes it possible to use the extractor 03328.

• For fitting snap rings and retainer rings without finger holes for shaft retainers of any description • With opening spring • Made of tool steel, forged, oil-hardened

• For loosening, cutting and attaching balance weights • For opening and pressing together the retaining springs • With cutting edge for separating the balance weights • Made of special tool steel, forged, oil-hardened

• Cutting edges inductively hardened • Precision cutting edge for piano wire (D2 quality) • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• Most popular shape for assembly work, trimming printed circuit boards, also for radio and telephone work • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Tight-fit joint movement • With box-joint and opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For straight cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting hard and soft wires • With cable stripper function for all common cables ranging from Ø 8 mm to Ø 13 mm • For accurate, fast and safe stripping of all common round cables • Cutting edges inductively hardened • Precision cutting edge for the finest wires • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For cutting hard and soft wires • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Cutting edge hardness approx 62 HRC • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles coated with plastic • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• Cutting edges inductively hardened • Precision cutting edge for piano wire (D2 quality) • Precision cutting edge for bolts, nails, rivets, hard wires and similar materials • Cutting edge hardness approx 62 HRC • Power transmission with optimum leverage for easy and effortless work • Tremendous cutting performance, up to 50 % power saving compared with conventional power side cutters • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• Pliers for electrical installation • 4 Functions: cutting - stripping - crimping - bending • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • For shortening screws M 3.5 • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• Pliers for electrical installation • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• Specifically geared towards the requirements in the building and manufacturing industry • Cutting edges inductively hardened • Precision cutting edge for bolts, nails, rivets, hard wires and similar materials • Asymmetrical cutting edge for easily cutting long workpieces, too • Power transmission with optimum leverage for easy and effortless work • Tremendous cutting performance, up to 50 % power saving compared with conventional end cutting pliers • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• Pliers for electrical installation • 4 Functions: cutting - stripping - crimping - bending • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

The POWDRYER™ PD08 metal powder dryer is used to dry inorganic metal powder for the complex additive manufacturing (3D printing) process. It corrects the manufacturer’s fluctuating metal powder qualities, thus optimizing the metal powder’s flowability. It also reduces the number of air inclusions in finished workpieces. Significantly higher material densities are the result. Fields of application > Particularly for metal printing products where maximum strength is required > For the printing of alloys of aluminium, titanium, tool steel, etc. > Special tools for the metal-processing industry, machine and system engineering, prototype development, and more > Aviation, aerospace, and automotive industries, plus medical and dental technology

HNS HYDRAULIC NUT SPLITTER “Dial-in” feature on HNS150 makes adjustment of splitter simple, without the worry of damaging the bolt Specially designed “tool steel” cutter blade penetrates the nut to the precise point where it cracks, stopping short of the bolt threads Nut splitter features a dramatically improved cutter blade with an 800% greater resistance to chipping and breaking over previous models All models feature a rugged one-piece cutting frame coupled to a heavy-duty hydraulic cylinder Compact size allows you to use it in confined areas where it will delivers enough force to split the toughest “fused” or rusted-on grade 2H nuts Simply split nut on one side, spin nut splitter 1/2 turn and make second cut on opposite side; nut separates into halves for easy removal Uses a standard 3/8" high flow coupler

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

AMETEK offers a range of wear resistant tool steel powers used in P/M, MIM, and metal additive manufacturing. Tool steels use a combination of C, Cr, Mo, V, and W in an Fe based alloy to generate a carbide microstructure in the metal alloy. Powder Metallurgy (P/M) tool steels offer the highest grade of performance, especially in respect to toughness, due to the extremely fine and uniform distribution of carbides resulting from the atomization process. AMETEK offers multiple grades in the M, D, and T series of tool steels including M3-5, D-2, and T-15 among others. Each tool steel is optimized for its respective purpose to give exceptional properties. Some tool steels, such as our premium T-15 grade, can result in hardness near 70 HRC when appropriately processed and heat treated. Materials that have been routinely produced include M-2, M3-2, M3-5, M4-2, D2, and T15.