Support feet - Import export

Stock conveyors can be produced as radial type according to the location of the facility, land conditions and customer demand. The Belt Conveyor chassis is connected to the ground from the tail module with a fixed joint. High-strength steel construction feet made to support the weight of the intermediate modules and the drive module are attached to the axle located on the wheels. These wheels are preferred as filled wheels in order to be loose-proof. The gearbox is driven by a coupled motor. It is equipped with a special brake system to prevent movement due to environmental effects during operation or stopping. The center of rotation is the fixed hinge point in the tail module. It is provided to turn clockwise and counterclockwise by the angle allowed. In this way, the stock amount is much more than a fixed stock belt conveyor.

Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Inlet tray lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads . Supporting legs 50 ton capacity Side safety rails height 1.20m, removable Anti-slip surface in hot galvanized grating 2 lashing chains included dock with rolls bumpers

Inlet tray lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads . Supporting legs 50 ton capacity Side safety rails height 1.20m, removable Anti-slip surface in hot galvanized grating 2 lashing chains included dock with rolls bumpers

Inlet tray lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads . Supporting legs 50 ton capacity Side safety rails height 1.20m, removable Anti-slip surface in hot galvanized grating 2 lashing chains included dock with rolls bumpers

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by Electric motor. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by Electric motor. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Inlet tray and outlet lips hydraulically folded by Electric motor. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by Electric motor. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Brand: AZ RAMP- Type: FORMATION2020- 8 T Rated Capacity: 8 000 Kg Dimensions: Overall length: 12 152 mm Overall width: 2 400 mm Useful Width (Inside): 1.970 mm Length Inclined plane / Inclined part: 7 000 mm Length Platte-shape right: 4.800 mm Penetrating lip length: 750 mm Hydraulic leveling dock with electrical leveling Lifting height: Min Height: 800 mm- Max Height: 1 700 mm 6 Support feet, Side safety rails, height: 1.20 m Non-slip scalloped tread surface and hot-dip galvanized High resistance to corrosion.

Mobile loading ramp with hydraulic tilting bridge Brand: AZ RAMP - Type: STAR- 15 T Load capacity: 15 000 Kg Dimensions: Total length deployed: 10.55 m Overall Width: 2.07 m - Useful Width (Inside): 1.96 m Length Inclined plane / Inclined part: 7.15 m Length Flat-shaped horizontal: 3.31 m Input tray length: 2.10 m - Output lip length: 0.74 m Empty weight: 3 015 kg Adjustable lifting height: Mini: 1.00 m - Max: 1.60 m Slope: Min: 16.5% - Max: 22.37% The + Product: Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 35 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

loading ramp with integrated hydraulic dock. Brand: AZ RAMP- Type: FORMATION 2020 ADJ- 10T-ZR-STV Rated Capacity: 10,000 Kg Dimensions: Overall length: 16.18 m Overall Width: 2.22 m - Useful Width (Inside): 1.94 m Length Inclined plane / Inclined part: 6.60 m Length Height Flat-shaped horizontal: 1.10 m Integrated Hydraulic Leveling Wharf (Power Supply 220 V- 50 Hz) Lifting Height: Min: 0.60 m - Max: 1.55 m Support feet, 2 integrated dock stops with refuge zone of 500 mm. Side safety rails, height: 1.20 m, removable Non-slip bearing surface, and hot-dip galvanized Pre-drilled support legs

Mobile loading ramp with hydraulic tilting bridge Brand: AZ RAMP - Type: STAR- 12 T Load capacity: 12 000 Kg Dimensions: Total length deployed: 10.55 m Overall Width: 2.07 m - Useful Width (Inside): 1.96 m Length Inclined plane / Inclined part: 7.15 m Length Flat-shaped horizontal: 3.31 m Input tray length: 2.10 m - Output lip length: 0.74 m Empty weight: 2,815 kg Adjustable lifting height: Mini: 1.00 m - Max: 1.60 m Slope: Min: 16.5% - Max: 22.37% The + Product: Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 35 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Mobile loading ramp with hydraulic tilting bridge Brand: AZ RAMP - Type: STAR- 10 T Load capacity: 10 000 Kg Dimensions: Total length deployed: 10.55 m Overall Width: 2.07 m - Useful Width (Inside): 1.96 m Length Inclined plane / Inclined part: 7.15 m Length Flat-shaped horizontal: 3.31 m Input tray length: 2.10 m - Output lip length: 0.74 m Empty weight: 2,810 kg Adjustable lifting height: Mini: 1.00 m - Max: 1.60 m Slope: Min: 16.5% - Max: 22.37% The + Product: Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 35 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Mobile loading ramp with hydraulic tilting bridge Brand: AZ RAMP - Type: STAR- 8T Load capacity: 8 000 Kg Dimensions: Total length deployed: 10.55 m Overall Width: 2.07 m - Useful Width (Inside): 1.96 m Length Inclined plane / Inclined part: 7.15 m Length Flat-shaped horizontal: 3.31 m Input tray length: 2.10 m - Output lip length: 0.74 m Adjustable lifting height: Mini: 1.00 m - Max: 1.60 m Slope: Min: 16.5% - Max: 22.37% The + Product: Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 35 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Brand: AZ RAMP- Type: FORMATION 2020 ADJ- 8T-ZR-STV Rated Capacity: 8,000 Kg Dimensions: Overall length: 16.18 m Overall Width: 2.22 m - Useful Width (Inside): 1.94 m Length Inclined plane / Inclined part: 6.60 m Length Height Flat-shaped horizontal: 1.10 m Integrated Hydraulic Leveling Wharf (Power Supply 220 V- 50 Hz) Lifting Height: Min: 0.60 m - Max: 1.55 m Support feet, 2 integrated dock stops with refuge zone of 500 mm. Side safety rails, height: 1.20 m, removable Non-slip bearing surface, and hot-dip galvanized Pre-drilled support legs The + Product: specially designed for forklift school. Designed for use with self-mounted trans-pallet, 3 and 4-wheel forklift. Vertical platform of 45.64 m² to turn around with a trolley type 3 electric wheels

FREE ROLLER CONVEYORS DIAMETER MM. 60 AND PITCH MM. 80 FOR PALLETS The free roller conveyors P80 are characterized by a rollers diameter of mm. 60 mm and pitch mm. 80 and are the ideal solution when handling pallets, containers with reduced base and standard pallets with cross feed. They consist of a robust structure coated steel profile, with fixable supports and adjustable feet. The rollers are of high quality made of galvanized steel. Rotation on shielded ball bearings with permanent lubrication. The roller conveyors are built according to the scale, size and characteristics of packages to be handled.

PPF SERIES: PNEUMATIC FILLERS FOR CREAMS AND SAUCES STAINLESS STEEL AISI 304 - easy washable Volumetric dosing with pneumatic operation series PPF for the dosing of sauces and creams. Stainless steel AISI 304 construction with column for floor installation and adjustable support. Easy use and cleaning idael for small workshops and frequent variations in production. Designed for dispensing food products, chemicals, cosmetics, pharmaceuticals, etc. Available in five models with capacity max. 250 ml. - 500 ml. - 1000 ml. - 2000 ml - 5000 ml. The internal volume of the hopper is approximately 25-30 liters depending on the model. The dispenser is equipped with an adjustable work surface with a maximum height of mm. 500. To obtain a suitable working height to maintain a correct position during the dosage it is advisable to purchase the stainless steel support with feet.

MOTORIZED ROLLER DIAMETER MM. 60 PITCH MM. 80 FOR HANDLING PALLETS We realize motorized rollers conveyors with diameter mm. 60 and pitch mm. 80. They consist of a sturdy frame in painted steel and supports with fixable feet, adjustable height. The high-quality rollers are made of galvanized steel with rotation on shielded ball bearings and complete with pinions or sprockets. The transmission is a chain loops or tangential chain. The geared motors groups have suitable power with start/stop switches or photocells control. Normally the rollers have an useful width of mm. 800-1000-1200-1500 and module length of modules mm. 2000-3000. Ideal solution when handling pallets, containers with reduced base and standard pallets with cross feed.

The human feet have to carry us every day and are constantly exposed to great strain. However, they receive far too little recognition for their heavy duty. Feet need a lot of attention, yet very few people like to talk about our daily companions and their supporting role. They are always enclosed, they have to surround themselves with skin-unfriendly fabrics and with shoes that are too tight, too wide or too high. Incorrectly treated and neglected feet often fail their duty and a lack of care often leads to deformations of bones, muscles and tendons and to damaged skin and nails. Yet, good foot care only takes up a little time. Foot creams and foot balms care for, disinfect and scent the skin and provide a supporting massage of the feet. WFS produces corresponding care products on customer’s order.

GC pro 3560 TH 060 N contains 35% natural fibers from sunflower seed hulls and is an absolute allround natural fiber material for various packaging applications. Sunflower seed hull fibers are a by-product of sunflower oil production. They are GMO-free, have no competition with food and require no additional farmland. GC pro has a lower carbon footprint than comparable materials. Frequently, this material has been used for material trays, support feet and containers. The material can be colored using a masterbatch. Other advantages of GC pro: 100% recyclable Reduced cycle times No sink marks Improved CO₂ balance sheet Lower energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.

Heavy duty portering chair Nests to occupy reduced floor space & encourage tidy storage Seamless upholstery using flame retardant antimicrobial vinyl Moulded drop down arm rests allows side access for patients & porters Sliding footrest aids access as well as supporting feet during transit Design ensures chair will not tip should patient stand on the step X-ray / notes pocket on rear of seat Hook for patients' belongings Fittings to accept infusion poles 200mm fixed wheels / 150mm total stop braking castors (cushioned) Maximum load 190kg

-sturdy frame made of steel tubing -loading surface 30 mm softwood timber -rotating assembly with fork sleeves and feature to prevent slipping -2 supporting feet -2 heavy duty wheels Ø 300 x 100 mm Individual construction on request e.g. superstructures such as additional plug-in level, stakes, side walls, shelving, retention basins

The oxygen bottle is connected to SÖHNGEN® pressure regulator by hand connection system without any tools! Features of the oxygen bottle: Filling pressure 200 bar Test pressure 300 bar Cylinder coat painted white outside Inside are sandblasted Against corrosion protected Cylinder valve 19,8 DIN 477, chrome, with gum hand wheel Available in 1, 2 as well as 5 or 10 l Support feet (only with 10l- bottle) Height 345 – 980 mm Diameter 83 – 140 mm Weight 2.3 – 16.4 kg