Wooden beams - Import export

The wood offered and the care used in our precision manufacturing and drying technologies, demonstrates our commitment to meeting our customers’ needs and enables us to provide our customers a variety of sizes, types and manufacturing in accordance with the individual specifications of products. Beams: 78x78x2400/3000/1200 78x98x1200/2400

3 center plank holder. It is fixed to the wooden surface by tightening Galvanized coating

2 center plank holder. It is fixed to the wooden surfoce by tightening. Galvanized coating

pıne/cedar/ıroko/fir/ oak / beech / spruce glulam ( laminated) T: 30-290 W: 90-1250 L: 500-18000

Wood pine and (linden) panel A/A, A/B, B/B grade: Thickness 15 mm — 45 mm Width: 200 mm — 900 mm LENGTH: up to 6000mm Available 2 layers panel up to 6000mm

The wood offered and the care used in our precision manufacturing and drying technologies, demonstrates our commitment to meeting our customers’ needs and enables us to provide our customers a variety of sizes, types and manufacturing in accordance with the individual specifications of products. Beams: 78x78x2400/3000/1200 78x98x1200/2400

In the softwood category will find a variety of pine wood beams. Pine beams are designed primarily for construction purposes such as traditional construction and wood construction. You can get it air dried pine timber beams or killed dried in the oven as well as before or after planing, in different sizes on demand. Wooden pine beams lumber are intended mainly for industrials purposes using several of qualities, sizes, and shapes

White wood beams are made for industrial and construction purposes such as Traditional construction and wood construction. You can get air dried timber or killed dried in the oven as well as before or after planing, in different sizes and shapes on demand. Solid wood spruce beams are intended mainly for the industry to get a rustic warm and clean appearance qualities.

Owing to the fact the the TFV 10 S model is crafted of literally indestructible polythene, it is extremely easy to operate and lightweight yet it is rigid enough to withstand the wear and tear of daily use. Adding to this, it consists of parts that are all crafted from metal, which not only assures that the turbo fans are purposed to cater to the challenges that are daily put forward on them, but also proves that they are built for long service life. The TFV 10 S can perform at several angles such as 0°, 45°, 90°, which shows that the turbo fans are are extremely versatile and hence are perfectly suited for requirements such as plaster, screed, cavity drying, carpet, maintenance cleaning, floor drying, ventilation of seep surfaces in office spaces, bowling alleys and gyms, ceiling and wall drying and particularly wooden beams.

Cantilever racking systems are highly load-bearing storage systems intended for storage of long and/or bulky storage materials. Such goods include timber, wooden boards, metal sheets, sections, beams or steel elements, building materials but also scrap cars and all kinds of heavy loads. Cantilever racking by OHRA is distinguished from standard racks using solid steel sections for all load-bearing elements. Thanks to this slim construction of our racks a high storage capacity can be achieved across a small floor space. There are specific types of cantilever racks for every product and for every industry. They differ based on requirements, height, useable depth, load-bearing capacity or section thickness. All cantilever racking are produced individually according to customer requirements; they are equipped with a high-quality powder coat or hot-dip galvanised for outdoor storage.

OPEN STRUCTURE The M40 rotary engraver is 8.26x12in engraving area benefits from an open structure that allows larger items to be engraved when needed. Create custom engraving on very long plastic signage plates, electrical labels, thin wood beams, golf clubs, swords, irregular-shape items, and simply use as a sign engraver. GIFT ENGRAVING WITH THE M40 GIFT The M40 Gift includes an automatic lubricant tank and a rotary device to personalize glasses and bottles. The rotary device can be tilted for conical items. Engrave and personalize any flat or cylindrical items up to 4.33in height. BEGINNERS ROTARY ENGRAVER Control and adjust your work with our dedicated Gravostyle™ or ABC engraving software, thanks to several options. The M40 comes with an auto-centering jig and a laser beam (Point & Shoot) to help you place the item to engrave, while the engraving software automatically picks up its position. The included Gravogrip™ table firmly holds the item without leftover residue on it.

The coated wooden beams do not absorb oil or water and, due to their officially proven antislip properties, are perfectly suited as a load securing aid. The wooden beams become considerably more robust thanks to the secuGrip coating, and our customers praise the drastically improved service life, even in tough transport applications. Directly sprayed surfaces can be produced seamlessly and without joints; these surfaces permanently seal the substrate against water and air. The secuGrip coating can also be sprayed directly onto hooks and other constructions.

In our primary wood processing facilities, we produce sawn wood according to market standards. The plants are located in two locations- Podgorica and Bijelo Polje-and are equipped with modern automated machines. We offer: Sawn wood for construction of all dimensions (beams, planks, laths) wood elements and semi-finished products for further finalization

All products in this edition are made of high quality Cherry Wood. Luxury Edition offers designs combined with beautiful hand cut crystals. Some of the designs are refined with various ribbons. The whole production is Hand made, including magical branded gift wrapping from Choralis Art.

Suitable for restoration, protection and preserving of antique furniture, carvings and frames. Bio Renaissance Wax rejuvenates treated wood and preserves any raw wood indoors, such as wood ceiling, wall cladding, beams, railings and cork. Also suitable for treating stained wood. Retains diffusivity, is anti-static and protects against moisture and environmental influences (especially during the heating period). Bio Renaissance Wax retains the natural beauty of wood.

Suitable for wooden decks, cladding, ceiling beams, carvings, shelves and furniture. Wax Stain is very well suited for spruce and pine but also suitable for other domestic wood indoors. Wax Stain is a solvent and ammonia-free wax emulsion and positive stain. All colors can be mixed among another. Transparent Wax Stain may brighten or dilute other colors.

Suitable for restoration, protection and preservation of antique furniture, carvings and picture frames. Antique Wax rejuvenates treated wood and nurtures indoor raw wood such as wooden ceilings, wall cladding, beams, railings and cork. Antique Wax is also suitable to treat stained wood. It is diffusible, anti-static and protects against moisture and atmospheric influences (especially during the heating period). It preserves the natural aesthetic of wood.

This anchorage point (Ø 16 mm) and its base plate (100 x 100 mm) are manufactured completely from stainless steel. The device is simply screwed permanently onto a wooden beam. It is available in different lengths and comes with the 4 stainless steel screws required for installation. EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Min. beam dimensions: 100 mm x 120 mm Incl. installation set Add a supporting tube for usage as an end or corner post in a lifeline system

If you are looking for an unobtrusive anchorage point to secure up to 3 individuals, simply attach this stainless steel anchor loop (Ø 5 mm) to a wooden beam. Once installed on a pitched roof, this anchorage device is virtually invisible. All you need for quick-and-easy installation are the 2 stainless steel screws provided. EN 795:2012, A + CEN/TS 16415:2017 Virtually invisible anchorage loop Designed for load-bearing wooden structures The loop is simply screwed onto a wooden rafter (also suitable for over-rafter insulation) Minimum rafter dimensions: 60 mm x 120 mm

Simply clamp this stainless steel anchorage point (Ø 16 mm) onto a beam (max. 150 mm) using its base and counter plates. Do the dimensions of your beam differ? Upon request, we can also supply anchors with national technical approval in custom sizes. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 Clamped onto a wooden beam using a base and counter plate (max. girder width: 150 mm) Add a supporting tube for usage as an end or corner post in a lifeline system Incl. stainless steel installation set Available for other beam sizes upon request

Simply install this stainless steel anchorage point - which includes a welded-on supporting tube (Ø 42 mm) - on a pitched roof surface. The flexible crossbar, which is screwed onto a wooden beam, allows you to adjust it according to the roof pitch. It is installed using the 4 stainless steel screws supplied and then sealed up using a standard antenna tile. EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Minimum beam dimensions: 60 mm x 120 mm Adjustable angle and crossbar position Installation materials included

This stainless steel anchorage point is equipped with a wavy aluminium base plate which fits snugly to the waves of a fibre cement roof (wave distance 177 mm). The anchor device is simply screwed onto a wooden beam using the screws provided. EN 795:2012, A + CEN/TS 16415:2013 Special wave design, e.g. for Eternit and similar roof systems Developed for load-bearing wooden structures Simply screw it onto one single wooden beam Min. beam dimensions: 100 x 120 mm

Once attached to a beam using the 2 long screws provided - with the 14 smaller ones screwed straight into the wooden panelling - this stainless steel anchorage point (Ø 16 mm) and its base plate (200 x 200 mm) reliably protect roof workers & Co. from falling. This device was awarded national technical approval by the German Institute for Construction Technology (DIBt). National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 abZ: Wood min. 24mm EN 795: Wood min. 24mm Incl. installation set Add a supporting tube for usage as an end or corner post in a lifeline system

The thread of this no-nonsense stainless steel anchorage point (Ø 16 mm) is screwed straight through the wooden panelling into the beam. Simply drill a hole through the panelling (at least 18 mm) and into a load-bearing wooden beam (min. 80 mm x 120 mm). EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Minimum beam dimensions: 80 mm x 120 mm Depth of wooden panelling: ≥ 18mm

This stainless steel roof safety hook with its flat shaft is simply installed on a continuous wooden beam. The 2 stainless steel screws supplied are screwed into the beam through the counter lathing/panelling. Special screws are also available for installing the device on top of over-rafter insulation. This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included