Lubricating system - Import export

Lindemann Diesel Boost cleans and lubricates the entire diesel fuel system. By regularly adding Lindemann Diesel Boost to your tank, you keep the engine and fuel system clean and in good condition

Jung JF520 surface and profile grinding machine in very good condition. Machine No. 1569. Year of construction 1981 - Grinding length max. 600 mm - Sliding width: 200mm - Magnet size: 500x175mm - Grinding wheel dimensions: 250x25x50.8mm Bcspaqsayd8 - Spindle speed: stepless 4200 omw./min. - 380V 4kW - Weight about 2000kg Equipment: - 1 axis digital display, - Flanges - Infinitely adjustable spindle speed - Infinitely variable hydraulic supply in transverse direction - auto lubrication system, - Automatic height feed with rapid traverse - machine books

Lincoln P205 lubrication sytem pump 8 Liter 400V Suitable for grease to NLGI 2 Includes pump element K6 with an output of 172 cc/hour. Can be extended to a maximum of 5 pump elements, see related products. Connection pump element 1/4"G Supply voltage 340-420V/50Hz - 440-480V/60Hz Maximum pressure 350 bar Protection class IP55 Temperature -20 to 70°C The advise is to use a pressure relief valve for every pump element. Click here for an overview.

Lincoln P215 Lubrication system pump 30 Liter 400V Suitable for grease to NLGI 2 Includes two pump elements K7 with an output of maximum 47-189 cc/hour. Can be extended to maximum of 15 pumpelements, see related products. Connection pump element 1/4"G Supply voltage 340-420V/50Hz - 440-480V/60Hz Maximum pressure 350 bar Protection class IP55 Temperature -20 to 70°C The advise is to use a pressure relief valve for every pump element. Click here for an overview.

SKF High Viscosity, High Load and High Temperature Grease SKF LGHB 2 is a high viscosity mineral oil based grease using the very latest calcium sulfonate complex thickener technology. Due to its specific composition, the product can withstand high temperatures and extreme stress and can therefore be used for a whole range of applications, especially in mining and in the metal and cement segments. This grease contains no additives and the (EP) high pressure properties are due to the soap structure. • Excellent anti-oxidation and anti-corrosion properties • Good EP performance in high load applications • Withstands peak temperatures up to 200°C Typical Applications: • Steel-on-steel ball joint bearings • Pulp and paper machines • Asphalt vibrating screens • Continuous casting machines • Sealed spherical roller bearings with an operating temperature up to 150 °C • Roller bearings in the steel industry • Forklift mast rollers

WATTSAN M1 2030 wide-format machine has a large working area of ​​2000×3000 mm with a slatted table top. The design includes a spindle with an ER-25 collet chuck and a power of 6 kW. An air cooling system and a built-in vacuum cleaner for collecting wood chips and dust are also available for an additional fee. The leadshine 860 stepper motor driver is responsible for moving the portal, the machine is controlled by the operator through NcStudio. The body of the machine is a welded structure made of steel profile, the weight of the machine is 1400 kg. The maximum travel speed along the axes is 25 000 mm/min, the maximum travel speed during operation is 15 000 mm/min. The spindle speed reaches 24 000 rpm. If you want a more upgraded machine, we can install: Vacuum table. DSP controller. Syntec control system. chip removal system. manual auto lubrication. more powerful spindle or additional cutting heads. rotary device for processing cylindrical products. tool sensor.

CNC milling and engraving machine WATTSAN A1 1325 is a multi-purpose equipment for engraving, cutting and 3D milling sheets of materials. WATTSAN A1 1325 has a grid type working table of 1300×2500×200 mm, but additionally we can install a vacuum table, that holds the sheet material in place and significantly ease the process. A spindle ER-25 with collet has power of 3 kW, water cooling system. The portal moved by step engine controlled by driver Yako 2405. Frame of the machine is welded from steel profiles construction; weight of the machine is 800 kg. Max speed of movement along axis is up to 25 000 mm/min, max working speed is 15 000 mm/min. Spindle rotation speed can reach 24 000 rpm. The machine controlled by NC-Studio control system. We can modernize the machine with the following: vacuum table, DSP controller, Syntec control system; chip removal system, automatic lubrication, more powerful spindle or additional cutting heads, rotator for cylinder shaped parts, tool sensor.

CNC milling and engraving machine WATTSAN М1 1616 belongs to М1 series, that is considered more technically sophisticated than A1 series and has a massive frame. The frame is more stable and allows process more complex parts. The machine is applicable for cutting of wood, MDF, chipboard, acryl, plexiglas, PVC, aluminum, composite. Using WATTSAN М1 1616 you can also perform a 3D milling. WATTSAN М1 1616 has a grid type working table of 1600×1600×300 mm, but additionally we can install a vacuum table, that holds the sheet material in place and significantly ease the process. Max speed of movement along axis is up to 25 000 mm/min, max working speed is 15 000 mm/min. Spindle rotation speed can reach 18 000 rpm. The machine controlled by NC-Studio control system. We can modernize the machine with the following: vacuum table, DSP controller, chip removal system, automatic lubrication, more powerful spindle or additional cutting heads, rotator for cylinder shaped parts, tool sensor.

CNC milling and engraving machine WATTSAN A1 1616 is a cost efficient, easy-to-use and multi-purpose equipment. The machine performs a cutting and engraving, also WATTSAN A1 1616 can perform a 3D milling. WATTSAN A1 1616 has working area of 1600×1600×200 mm, spindle ER-25 with power of 2.2 kW, water cooling system. The portal is moved by step engine controlled by driver Yako 2405. Operator controls the machine with control system NC-Studio. Frame of the machine is welded from steel profiles construction; weight of the machine is 500kg. Max speed of spindle movement along axis is up to 25 000 mm/min, max working speed is 15 000 mm/min. Spindle rotation speed can reach 24 000 rpm. The working table has a T-slot grid plate. We can modernize the machine with the following: vacuum table, DSP controller, chip removal system, automatic lubrication, more powerful spindle or additional cutting heads, rotator for cylinder shaped parts, tool sensor.

WATTSAN М1 1313 has a grid type working table of 1300×1300×200 mm, but additionally we can install a vacuum table, that holds the sheet material in place and significantly ease the process. The construction includes a spindle ER-25 with collet and power of 2.2 kW, water cooling system. The portal moved by step engine driver Leadshine 860. Operator controls the machine with control system NC-Studio. Frame of the machine is welded from steel profiles construction; weight of the machine is 700kg. Max speed of spindle movement along axis is up to 25 000mm/min, max working speed is 15 000mm/min. Spindle rotation speed can reach 24 000 rpm. We can modernize the machine with the following: vacuum table, DSP controller, chip removal system, automatic lubrication, more powerful spindle or additional cutting heads, rotator for cylinder shaped parts, tool sensor.

WF 9245-35 – Single needle, flatbed, walking foot machine with 35 cm working space. This is a high quality machine suitable to sew on leather, furniture and upholstery. This machine is equipped with a large hook, safety clutch and semi-automatic lubrication system.

WF 9245 – Single needle, fl atbed, walking foot machine. This is a high quality machine suitable to sew on leather, furniture and upholstery. This machine is equipped with a large hook, safety clutch and semi-automatic lubrication system. WF 9245 B – Same as WF 9245, but equipped for binding work (binder not included). Products WF 9245, WF 9245 B Table Top No Table Top, Table grey C WF 9245 (120x55x4 cm), Table Top D 105x55x4 cm Stands No Stand, Stand C (China), Stand K (912 mm), Stand K short (667 mm), Stand Z Motor Set External synchroniser SY0129 (600-29), G 60 Servomotor (optional: external synchroniser G series), i60-4-GL-220, MT0175 – 750 Watt mini motor, No Motor Set, NS clutchmotor 1400 RPM 220 V, NS clutchmotor 1400 RPM 380 V Option External synchroniser for G-series, No option, Thermical switch 220 V, Thermical switch 380 V Option for i60-4-GL-220 pneumatic presser foot lifter WF 1335, 9245, ZZ 1266, Pneumatic backtack WF 1335, 9245, Set PFL + BT WF 1335, 9245,...