Operating wrenches - Import export

The all-new TAC (Torque & Angle Control) is really two wrenches in one. First, and foremost, it is a traditional mechanical click-wrench. When the preset torque value is achieved, the internal mechanism moves, striking the side of the flattened case. That creates a distinctive sound. The operator stops pulling when the wrench clicked, the LED flashes green, and the display on the Global 400 advances the batch count and flashes green. Note that there are two torque values shown on the Global 400 display. There is the "click" torque value, the point at which the wrench clicked. There is also the peak value. This is the point at which the operator stopped pulling. The display to the right also shows that the appropriate torque value was achieved 22 degrees of rotation after snug torque was achieved. Compatible Controllers: - Global 400 - Global 400mp - TCV-e2

Battery System E-Wrench – Hybrid Technology Yokota impulse wrenches are powerful, very accurate and most important, have no kick-back. Yokota system e-wrenches have a built-in torque transducer and angle-encoder on the main shaft and is wireless connected to a controller. The Yokota battery system e-wrench is the perfect solution for applications where cables or hoses are disruptive, but you still need to have all data checked, controlled and documented. Wireless communication with the control unit WU-1 for up to 10 meters. Each controller can be paired with up to 4 independently operating battery system e-wrenches. For data-collection, the controller is equipped with a RJ-45 connector for LAN Ethernet TCP/IP. Optional Display DC-1 shows tightening result (OK / NG and torque level reached) and either the free running angle, the tightening angle or the number of bolts and number of impulses. Connection to the WU-1 controller by means of cable with 5 meter length (included in...

Colour Marking for Cap Screw Tightening A mark is made on the tightened cap screw and an adjacent location on your work. This lets you check for subsequent loosening. A marking torque wrench for tightening cap screws, which prevents human tightening errors. Upon reaching the set torque the marker is designed to stamp on the bolt and work. Because the stamped mark is put on the side of the bolt and the work piece, it can not only prevent missed tightening but also detect loosening of bolts. The marker is designed to stamp only when the torque wrench operates upon reaching the set torque. Marking stays on by use of quick dry ink. One refill of ink is capable of approximately 3,000 times of stamping. Marker is ink cartridge type. Only hand force required for tightening a bolt and marking the bolt simultaneously. Applicable for international use including the EU region. Compliant with ISO 6789 Type II Class B calibration procedures. Features Accuracy and calibration procedures...

Single FM-Wrench Control The TCV-FM 2.4 GHz is ideal when the application calls for accuracy, repeatability and simplicity of the 2.4 GHz Wireless Preset Clicker-Type Torque Wrench, and only a single tool at the station needs to be controlled. The TCV-FM provides verification to the operator on the quality of each use, plus DC 24V relays and I/O port for line controller communications (PLC). When a click-type torque wrench is operated on a fastener, the wrench spends a certain amount of time in the “clicked“ position; thus a small time slot occurs between releasing and easing the wrench. The TCV-FM detects proper use of the Switch Wrench via timer – like the PTV-FM, but without batch counting. It compares the duration of the click to the T-min and T-max specification limits and immediately communicates to the operator the acceptability of that use of the wrench. Thus missing or over-torqueing of fasteners and jerking torque wrenches is eliminated, the error rate is reduced and...

Blind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel Technical data Weight: 750 g Total length: 212 mm Total stroke: 16,2 mm Single action stroke: 1,8 mm Nosepieces/accessories Nosepieces:10/18, 10/24 and 10/29 1 maintenance wrench (on magazine) Operating instructions with spare parts list Advantages • The force increases when the handle is closed. This is made use of via the special arrangement of the lever when setting blind rivets: ergonomic design • The required manual force is reduced by around 40 percent if actuated several times. • Actuation lever with an opening spring for easy single-handed operation • Jaw mechanism with spring reset for safe and automatic mandrel ejection • Rivet mandrel collection container can be clipped to the body casing and is easy to empty • Larger device lift: a benefit when handling extra long blind rivets • Link pin on anti-twist bearings • Ergonomic lever positions and handle design

Working range Blind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel Technical data Weight: 480 g Total length: 275 mm Stroke: 8 mm Accessories Nosepieces: 10/18, 10/24, 10/27 and 10/32 1 maintenance wrench, operating instructions with spare parts list Advantages • Body casing in high-quality die cast aluminium • Body head made of forged steel • Narrow head for difficult to access rivet locations • Opening spring for automatic ejection of the mandrel • Ergonomic handles

Working range Blind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel Technical data Weight: 575 g Total length: 260 mm Stroke: 8 mm Accessories Nosepieces:10/18, 10/24 and 10/32 1 maintenance wrench, operating instructions with spare parts list Advantages • Body casing in high-quality die cast aluminium • Body head made of chrome-vanadium steel, forged • Steel inserts on all bearing points subject to wear • Intermediate lever system reduces the force required and dampens the tear-off effect • Narrow pliers head for difficult to access rivet locations • Ergonomic slip handles • Simple maintenance – fast jaw change

Working range Blind rivets from 3.0 up to 6.4 mm Ø all materials Technical data Weight: 1.93 kg Length when closed: 310 mm Length when opened: 810 mm Stroke: 10.5 mm Accessories Nosepieces for Ø 3.2 mm, 4.0 mm, 4.8 mm, 6.0 mm and 6.4 mm, 1 maintenance wrench, Operating instructions with spare parts list Advantages • Pliers casing and handle in high-quality die cast aluminium • Shear system in high strength steel, galvanised • Moulded handle — double bearing • Narrow casing for difficult to access rivets • Enclosed pliers casing prevents soiling • Favourable lever arm arrangement with 4-joint slide block bearing — reduced effort More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -Ideal for use on 5-axis machining centres -Reliable and fast clamping of unmachined parts, flame-cut and sawn materials with gripper jaws -Clamping of parallel pre-machined workpieces with optional step jaws -Gripper studs suitable for materials with a strength of up to approx. 1000N/mm² Product features: -Optimum accessibility for 5-sided machining thanks to the combination of compact base and large clamping width -Stamping and clamping in a single process, in the working area itself, without any additional accessories -The movable/pivot support jaw allows different workpiece contours to be clamped -Gripper studs can be changed without tools and are easy to adjust by hand -Operation with a torque wrench – max. 30 Nm -High-pressure spindle with power intensification