Operation levers - Import export

Well-rounded: The ASP 460 derinder was designed specifically to process round cuts such as ham, shoulder and haunch. Advantages Clean removal of the rind without remnants Perfect speed regulation in combination with the Weber tension roller Variable adjustment of the rind or cutting thickness Moveable with swivel and fixed castors Space-saving With integrated bucket support and low space requirement User friendly Foot lever as standard Options: Foot switch or body operated lever Special tables Special rollers Special voltage

Design as item HS1000K, but with long operating lever as well as extended outlet in order to allow hygienical operation with the elbow. Measurements in mm (W x H x D): 100 x 280 x 230 Contents: 1.000 ml

LEVER OPERATED YELETTING MACHINE, WITH SINGLE HEAD, automatic feeder, cast-iron frame, without stand. Suitable for smaller volume applications and where one eyelet are required. Ideal for automatic application of warranty seals in cardboard industry, bank office, post office and in many others field. It is especially used in food industry for to seal and at the same time for to apply a printed card on plastic bags.

The transparent food dispensers help to reduce the amount of outer packaging. Sell loose goods such as rice, noodles, pulses, cereals or baking ingredients for independent dispensing in the individually required quantity. The food dispensers are available in different sizes. They are filled from above via a large lid opening. Due to gravity, the bulk material always falls down where it can be filled into a container by operating a lever. The suspension device on the rear side is designed in such a way that even containers with different capacities end uniformly at the removal height. A conversion to unpackaged articles is child's play with the help of our products!

MANUAL DISTRIBUTORS OF LABELS MOD. TOWA AP 65 Manual dispenser for pre-printed labels on rolls. Fast and precise on flat and curved surfaces. The patented Mecha-sensor system automatically adjusts the application pitch according to the length of the labels. Each time the lever is operated, the label advances by max. 60 mm., If the label is longer, several drives are required.

The manual table clipper FP HR PS II is a small, handy and versatile table clipper with lever operating. It’s ideal for closing bags and net sacks where the number of packaging is not very high and therefore does not justify the purchase of a pneumatic machine. All parties have an anti-rust treatment and are easy to clean. Use aluminum clips diameter 2 mm, internal width 6 mm and length 13 mm, bars of 50 pcs. The clipper FP HR PS II is also used to close bags of mozzarella or other products containing liquid as it makes an airtight seal.

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The bucket is secured to the forks of the forklift truck by means of the supplied chain and to carry out the overturning it is sufficient to operate the release lever directly from the driver's seat of the forklift truck (by means of a rope) and therefore to operate in maximum safety. The tipping container is complete with polyurethane wheels with brake and gas shock absorbers to control the tipping speed Features - Rotational molded monobloc container (robust, handy and light) - Double wall with cavity, smooth interior and rounded edges - Reinforced base with ribs - Forked structure built with galvanized steel - N° 2 gas shock absorbers and end-of-stroke device for progressive tipping - N° 2 fixed wheels and 2 swivel wheels with brake

Immersion length: 1000 mm (sealless) suitable for emptying 200 l drums Suitable for mixing and pumping of corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas. Liquid examples: Emulsions, suspensions and dispersions, paints and lacquers Features: Two functions („pumping“ and „mixing and pumping“) in one unit Optional with electric or air driven motors No grease fillings Modular, service friendly design Radial-flow impeller (L) for higher delivery head Benefits: Change between "pumping" and "mixing and pumping" without moving during operation via a small lever below the handwheel High mixing performance and flow rate for thorough homogenisation and rapid drainage Lube-free pump tube, thus no contamination of the liquid Special lengths on request. Note: The drum must always be covered during the mixing process. Material: PP (polypropylene) Explosion Protection: not explosion-proof PURE version: without PURE version

FPX800 LEVER HAND DISPENSER - FOR GUMMED PAPER Manual dispenser suitable for measuring and cutting the gummed paper. Lever operation. Equipped with automatic cutting blade and water tank. The length of the paper strip is adjustable by lever with adjustable stroke. By simply pressing the lever, a strip of wet paper is obtained, ready to be applied to the box. The wetted paper ensures a much higher seal than the adhesive tape and provides a clear indication on the tampering of the box. Unlike the adhesive tape, to open the box it is necessary to break the paper and it is not possible to close it again.

Mechanical seal, with rotor for higher flow rates Suitable for mixing and pumping corrosive and neutral, aqueous up to slightly monitoring in non-explosive areas. Liquid examples: Emulsions, suspensions and dispersions, paints and lacquers Features: Two functions („pumping“ and „mixing and pumping“) in one unit No grease fillings Modular, service friendly design Benefits: Change between "pumping" and "mixing and pumping" without moving during operation via a small lever below the handwheel High mixing performance and flow rate for thorough homogenisation and rapid drainage Lube-free pump tube, thus no contamination of the liquid Note: The drum must always be covered during the mixing process. Material: Stainless steel Explosion Protection: not explosion-proof

sealless, with impeller For higher delivery head Suitable for mixing and pumping of corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas. Liquid examples: Emulsions, suspensions and dispersions, paints and lacquers, etc. Features: Two functions („pumping“ and „mixing and pumping“) in one unit No grease fillings Modular, service friendly design Benefits: Change between "pumping" and "mixing and pumping" without moving during operation via a small lever below the handwheel High mixing performance and flow rate for thorough homogenisation and rapid drainage Lube-free pump tube, thus no contamination of the liquid Note: The drum must always be covered during the mixing process. Material: PP (polypropylene) Explosion Protection: not explosion-proof PURE version: without PURE version

Vertical sealing machines for hanging garments, suitable for packaging ironed garments such as jackets, shirts and suits. They can seal all types of bags between 400 and 700 mm in width and of any thickness. The machines carry out an impulse welding (the resistances heat up only during the welding). Welding times vary from a minimum of 0.6 sec. to a maximum of 1.2 sec. The sealing machines for hanging garments are available in the following versions: FPMM MANUAL MODEL The FPMM manual model only performs the upper sealing of the bags containing the garments. The bars are closed by manual command from the operator who acts on a lever located on the control panel. The bottom of the envelope remains open. FPMA/FPMA PLUS PNEUMATIC MODEL The FPMA model is more professional and robust and has a minicomputer that manages the functionality of the machine, from the safety devices to the working times. Thanks to it, it is possible to work in three different operating mode.

The GEMÜ 717 2/2 or 3/2-way plastic ball valve has an ergonomically designed hand lever and is manually operated. The seat is made of PTFE. — High flow rates — Low weight — Nominal sizes: DN 10 to 100 — Operating pressure: to 16 bar depending on version and/or operating parameters — Media temperature: -20 to 100 °C depending on version and/or operating parameters

For pneumatic control of the tipper position (up/down), this hand lever operated valve when actuated, operates the hydraulic valve and engages PTO. Optionaly can be integrated with Rotex’s patented Solenoid valve integration to prevent tipper operation in unsafe positions IP6K5 Compliant 0 to 10 bar pressure rating Vibration compatibility up to 15g

This is a powerful 20.000 rpm straight grinder based on the SRD 8-20/2. To overcome the high load it is subjected to, the tool spindle has a double support.

Due to its revolution speed and high performance this quality machine can be used diversely, e.g. with a collet for tools of 3–8 mm diameter. A very impressive machine that stands for endurance and strength whilst meeting all ergonomic and weight requirements. A version with a pair of supports for hard applications is also available.

The machines are available in short, medium (L100) and long (L200) versions and thus ideal for jobs in hard to reach scopes.

The basic version of this ergonomically precise straight grinder is available in three different types. all have a sound damping exhaust air direction and are also available with a safety lever valve.

These small-powerful angle grinders have a flat head, robust gears and, with their double bearing sets, are superbly suited to transferring high torque. You have the choice of two tool-receiving sockets: •6 mm collet •M10 mounting thread

The angle head of this machine is very small. Carrying out good work in very inaccessible places is now much easier. Another advantage: the drive is in the angle head. This means that gears are not required, meaning less weight and no wear.

The finish of the angle grinder with elongated neck and a small angle head is particularly suited to working in not easy to reach places with a high degree of precision and performance.Two versions are available: version with 90° head (ZL 90) version with 45° head (ZL 45)

The UBM 6-20 M is a universal bending device for steel pipes up to 20 mm OD. It comes with a set of bending rolls for common applications. An integrated scale for angle detection helps you to reach the required pipe dimension in only one work step. The telescopic lever keeps the operator’s forces low when bending rigid pipes. •Compact design •Compact for mobile usage •Standard with a set of 6 bendings rolls •User friendly •Easy handling •Simple adjustment •Wide workpiece range •Innovative design •Angle scale included •Telescopic lever

The one pole indoor used disconnector EME type MI-UI is based on the MI-UNEL family and has the following characteristics: Robust welded frame of punched bended steel, with a specific anti-corrosion coating. Mechanical endurance class M0; 1.000 close-open cycles. Contacts and blades in silverplated or tinplated electrolytic cupper or brass. Epoxy resin insulators and drive rods in epoxy resin reinforced with fiberglass. Below you'll find the different executions and accessories of the MI-UI:MI-UI with motor drive H(eavy). Complete integrated motor drive, available in several supply voltages, with an electromagnetic clutch which allows normal manual operation with removable lever on the main shaft of the switch.

Description The multi-coupling has been created for connecting and disconnecting several hydraulic lines at the same time. This is done by an operating lever the guide crank of which is designed for a minimum of operating force. The connection of the hydraulic lines is done with flat face couplings. Due to the secial sealing it is possible to couple against trapped pressure on the male halves (max. 4x100 bar/ 5802 PSI) The main features of the multi coupling are: · Safety against commutability of hydraulic lines · Quick connecting · Coupling against trapped pressure · Optimally minimized leakage during coupling process Working Pressure 250 bar / 25 MPa / 3626 PSI Material Steel Surface Finishing Zinc-Nickel Standard Seal Material(s) NBR (Buna-N®), PTFE, PU

The AL100u is operated with a lever. With the AL 100u you can grind material from Ø20 to Ø76.1. The cross support and the slide with rotatable clamp are infinitely adjustable. This allows all tube profiles to be grinded at any desired angle from 30° to 90°. The Al150u has a wider belt (150mm), and can grind material from Ø20 to Ø114.3, and is operated by either a lever or handwheel operation for greater precision. Both machines grind square, rectangular and round pipes with different wall thicknesses and is suitable for all common material types. Thanks to the ALMI belt adjustment system, adjusting the grinding belt is now even easier with the supplied hex wrench. The grinding belt can be tensioned quickly and changing grinding rollers can be done in just a few seconds. Fitted with a deburring table, when a pipe has been ground it can be easily deburred on the deburring table. This makes the machine truly multifunctional.

Bomar Ergonomic 275.230DG Standard Details: Heavy duty one-piece cast bow Precision control hydraulic downfeed Substantial vices, quick set lever operation Bow rotates 45-90-60° Easy to read mitre scale Carbide blade guide pads and rollers Heavy duty blade tensioning unit Heavy duty, 3 phase motor Re-circulating coolant pump Adjustable guide arm Heavy duty gear train Blade speed: 35 & 70 m/min 500mm length stop included

Simultaneously connects several ports securely in one operation. Greatly reduces changeover time in multiple ports replacement. Handles several ports at once. Simple manual lever action completes easy connection / disconnection. Twostage lever operation prevents Cupla from accidental dropping due to sudden detachment. Twostage lever operation prevents Cupla from accidental dropping due to sudden detachment. Comes with lock mechanism to prevent accidental disconnection. Large flow equivalent to that of SP Cupla Type A. Two kinds of plates are available for each size. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Selfaligned valve design provides safety sealing of individual socket or plug when disconnected.

Simultaneously connects several ports securely in one operation! Greatly reduces changeover time in multiple ports replacement. Handles several ports at once. Simple manual lever action completes easy connection / disconnection. Twostage lever operation prevents Cupla from accidental dropping due to sudden detachment. Comes with lock mechanism to prevent accidental disconnection. Large flow equivalent to that of SP Cupla Type A. Two kinds of plates are available for each size. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Selfaligned valve design provides safety sealing of individual socket or plug when disconnected.

Clamps directly on straight copper pipes ! Double seal construction withstands a vacuum of up to 1.3 x 101 Pa. Clamps direct on to a straight copper pipe eliminating unnecessary welding or flaring. Withstands a vacuum of up to 1.3 x 101Pa (when connected) making it possible to be used in leak testing, evacuation and refrigerant gas charge. Select from three standard types of seal materials to be used with fluids for air conditioner and refrigerator production lines. Many models to suit various pipe sizes. One lever operation simultaneously clamps and seals pipe. Double seal construction for tight fit on end and outside surface of pipe ensures excellent sealing and vacuum resistance.