Ornamental plants - Import export

Milled peat/Sod peat Fraction:0-20 mm /7-20 mm Raw material: sphagnum light peat, perlite Chemical characteristics: EC 0,8-1.5 mS/cm pH 5,5-6,5 (H2O) Additives: Limestone 4,0 kg/m3 NPK Multimix 1,2 kg/m3 Wetting agent 0,1kg/m3 Radigen 0,05kg/m3

A natural high-moor peat substrate of large size fractions with a fertiliser amount of up to 2.0 g/l, balanced pH level ranging, mostly from 5.5 to 6.5, improved water absorption and ideal air permeability. It is intended for replanting and cultivation of ornamental plants and growing of plants which are not very salt-sensi ve. Sod Peat Fraction:0-20 mm Raw material: sphagnum white peat Chemical characteristics: EC 0,8-1,5 mS/cm pH 5,5-6,5 (H2O) Additives: Limestone 4,0kg/m3 Wetting agent 0,1kg/m3 NPK Multimix 1,2kg/m3 Radigen 0,1kg/m3

NPK 12-12-17+TE is a special grade fertilizer based on Potassium Sulphate, with high level of Potassium, Magnesium, Sulphur, and low content of chlorine compounds. It contains micronutrients in balanced ratio to fulfill plant needs. It can be mixed with soil amendments and Humic acid before application. And besides It helps to promote absorption rates of nutrients to increase flowering and blooming strength in crops, landscape plants, ornamental plants, and fruit trees.

The sunflower spread from North America to Europe during the great geographical discoveries. It became established as an ornamental plant in the gardens of gentlemen, then moved to peasant gardens, and later to fields. Even today, its seed is one of our favorite snacks, and its oil is an important element of healthy nutrition. Its moderate consumption has a positive effect on our body as a whole thanks to its valuable ingredients. According to research, it contributes to the prevention of many diseases. It is rich in magnesium, a mineral that plays an important role in the metabolism of proteins, fats and carbohydrates, in normalizing circulation, in reducing cholesterol levels. The phosphorus contained in it contributes to the proper functioning of the nervous system, and plays an important role in the development and strengthening of bones and teeth.

Walnuts, which are especially popular in winter, contain a lot of useful nutrients for our health. It is an essential element of both traditional and reform nutrition. The walnut or nut tree is a genus belonging to the Nutaceae or Nutraceae family. It is native to Hungary as well, and in the Carpathian basin you can find two types more often: one is the edible ordinary walnut, and the other is the black walnut planted as an ornamental tree in Europe. It has spread in folk medicine due to its blood purifying effect, and is used in cases of gastritis and enteritis. Externally, it is used to treat skin diseases, acne, ulcers, and eczema. Rich in minerals. The calcium content helps maintain the health of bones and teeth, contributes to the prevention of osteoporosis, and plays a role in the proper functioning of nerves and muscles. Zinc is necessary for the production of insulin, growth and the metabolism of carbohydrates, proteins and fats.

is the oil of the evening primrose. It is a biennial plant that blossoms after two years for the first time. These blossoms contain the seeds, from whom the oil is obtained. The evening primrose grows in its original country North America and Mexico with over 120 different types. At the beginning of the 17th century it came as ornamental plant to Europe. Nowadays the evening primrose can be found in South Africa, Asia, New Zealand and South America. The plant is very undemanding and grows perfectly on dry and stony ground. During the first year the plant only grows leaves close to the ground. During the second year the plant reaches a height of 150 cm. The flowering period is from july to september during the evening hours. That is why the plant has its name evening primrose. One fruit contains up to 200 seeds, each seed is about 1.2 to 2.2 mm long and contains 15 % - 20 % vegetable oil.

The elmor 650 Multi-Channel Counter is primarily used as a fast seed counter, but also as a counter for any small parts, such as: Vegetable seeds Seeds of ornamental plants Cereals, Maize, Rice, Canola Pills, Pharmaceuticals small mechanical parts All these products have in common is that they are either irregularly shaped or very small and that they are difficult to handle manually. Dosing these parts with scales is often flawed or impossible. The 650 Multi-Channel Counter is specialized for fast counting and dosing of medium to large quantities. For counting and dosing of small quantities, our seed counter elmor C1 can be used. With the 650 Multi-Channel Counter, the product being counted is fed along different channels in parallel, separated and counted. The number of counting channels may be freely selected between 5 and 25. The counting channels are supplied via a supply hopper with a capacity of several litres. The counting speed is determined by the number of channels and the size and shape of the products. A multichannel counter with 25 channels can count more than 1 Million parts of 2mm diameter per hour. Like all machines from elmor, also the multichannel counters can be manufactured in different variants, in order to be combined optimally with other devices. Picture: 650 Multi-Channel Counter with 25 channels Technical data Count parts from 0.5 to 20 mm in diameter Modes of operation: Preset counter, Totaliser The conveyor speed is reduced shortly before reaching the desired quantity to achieve a high dosing accuracy. Counting error: 1/1000 or better The elmor 650 Multichannel Counter is controlled by a PLC, thus the combination with subsequent packing machines, fillers or printers is easily possible elmor Green Design Our label for: high energy efficiency longevity no standby power loss most components may be recycled production without solvents, ROHS conformity

The PC controlled, high sensitive elmor C3 Seed counter is preferably used in scientific counting tasks in laboratories Universities, research and breeding projects or in seed quality control etc. Parts that can be processed with the C3 seed counter are, for example: Dust fine plant seeds such as Arabidopsis thaliana or Begonia semperflorens Vegetable seeds, grains or seeds of ornamental plants Insects, pupae and eggs Small mechanical parts Pharmaceuticals Semiconductor chips etc. The C3 Counter is controlled solely via PC. Thus new solutions for the ever growing demands of the customers are possible. All settings and the results of all operations are logged and saved . This is an essential prerequisite for quality control and traceability of test results. The parts that can be counted with the C3 seed counter can be extremely small and irregularly shaped. Thus they are very difficult to handle manually. Dosing these parts with scales is often flawed or impossible. Therefore the use of the of C3 opens new options, since e.g. smallest parts in the sub-milligram range can be dosed faster and more accurately by counting than weighing the pieces. With additional software modules also further evaluations can be performed. These are currently: direct 1000 grain weight determination and the grain size analysis. Technical data Counts Parts from 0.1 to 18mm in diameter For spheres of 2mm diameter: Counting rate: 50’000 parts per hour Typical counting error: less than 1/1000 Runs under Windows XP/7/8.1 Free Serial Port (RS232) or USB needed Software included Totalizer Preset Counter Additional software available: Direct determination of the 1000 Kernel Weight Analysis of the size of the counted particles: Particle Size Analysis Conveyor bowls The parts to be counted are transported in a vibrating conveyor and are singularised by means of a sorting element. Both the conveyor bowl as well as the sorting element can be selected among different variants , depending on the properties of the product to be counted. A) Standard conveyor bowl made of anodised Aluminium with universal – sorting element FS0. FS0 is manually adjustable for all part sizes from 0.1 to 18 mm in diameter. B) Special sorting elements instead of FS0: FS1, manually adjustable, optimised for cereals, rice, paddy and products of similar shape and size FS2: manually adjustable, optimised for corn, soybeans, peas, beans and products with similar shape and size FS3: fine-drive adjustable in height and width, for very flat seeds or flat mechanical parts with the following dimensions: width: 0.5 to 10 mm, height: 0.5 – 8 mm, maximum length: 20 mm C) Special conveyor bowl with additional lateral opening for mechanically eliminating of accompanying substances, suitable for corn, cereals, soybean, paddy, etc. The height of this opening can be adjusted from 0 to 5 mm and allows unwanted accompanying substances laterally be sorted out. Not suitable for parts smaller than 1 mm in diameter. Can be used with sorting elements FS0, FS1, FS2, or FS3 combined. D) To meet the needs of various industries, the conveyor bowls can be made ​​of other materials . These bowls are for example extremely impact resistant or correspond to the rules of the FDA, etc. Such trays can be made ​​from various basic materials like Titanium, PEEK, Polyamide and others. E) The standard aluminum bowls can be treated or coated in order to satisfy specific requirements. With increased mechanical stress or when in contact with food, the surface can be hard anodized. A hard coating of nickel has a high surface hardness and is FDA approved, Polyurethane (PU) coating permits rapid transport of heavy mechanical parts and prevents noise and wear. Again, FDA approved materials can be used. F) Feeder Bowl with vertical outlet: Short cycle times are possible, as the seeds leave the bowl after a short run time. Advantageous when many different lots must be processed, often used for the fast 1000 grain weight measurement. Used for seeds which can be easily singularised like Crop, Soy, Corn, Canola etc. The seeds should have a diameter of 2 mm or more. Volume 0.8 litres, or about 2500 kernels of Corn. Automatic 1000 Grain Weight Measurement By means of an additional software module, an electronic balance and a special frame, the precision counter C3 can be used for the direct determination of the 1000 kernel weight of a sample. Both the C3 as well as a balance are connected with the control computer. A freely selectable quantity is counted and falls on the scale pan. At the end of the counting operation the weight of the sample and the corresponding number of particles is transmitted automatically to the PC, where the 1000 kernel weight is calculated. With the conventional 1000 grain weight determination, the number of items and the weight must be entered manually into a calculating machine. In many cases, exactly 500 or 1000 kernels are counted and weighed; and then the 1000 grain weight can be determined without no arithmetic exercise, but the danger exists that the result is falsified by separation effects during the operation of the vibrating conveyor (grain size selection). With the simultaneously determination of seed quantity and weight all potentially faulted manual inputs are eliminated. But most important is that in this procedure the particle size selection is impossible. If necessary the result can be printed out or processed electronically. Further the danger of the grain size selection can completely be avoided. Particle Size Analyzer The precision seed counter C3 can be used as particle size analyzer to determine the particle size distribution of a given sample by means of a special software module. The size of the singularised and free falling parts is measured in one dimension with a resolution of some 1/100 mm. This measurement is intended primarily to compare different samples qualitatively. With spherical parts the measurements give also quantitative information. The measured values of the particle size analyzer are stored as txt file. This makes it possible to further process the raw data individually by means of appropriate standard software. Filling Carousel The C3 parts counter can be combined with the elmor 780 carousel filler. The carousel filler allows semi automatic, to a large extent unsupervised filling of vials, tubes, small containers as well as bags from paper, glassine or composite material. Feeding Conveyor elmor 610 Feeding conveyor and storage hopper for automatic refilling of the conveyor bowls of our counting machines C1, C3 or CX elmor Green Design Our label for: high energy efficiency longevity no standby power loss most components may be recycled production without solvents, ROHS conformity Click here to add your own text Click here to add your own text

MPS1 is a fine-structure mix for germination, for trays and blocking, for manual and automatic filling. This is the mix for growing young vegetable and ornamental plants from seed. The peat moss has been screened, the particle size is 0-6 mm. The structure of the substrate is suitable for automatic filling of trays. For tenaciousness and for inhibiting water evaporation the substrate includes in majority black peat and a small part of white peat for root aeration and better water absorption. pH of the substrate is adjusted to 5.2-6.0. For better rewetting, the substrate includes wetting agent. This substrate can be used in greenhouses, as well as for open-air plant production. The substrate includes starter fertiliser, nutrient level is average to meet the needs of a very wide choice of plants. The product is available in non-compressed bags and also big bales. Palletised ready products are shipped in sea containers or trucks. Makes your plants grow better!

The extra fine fertilised substrate with adjusted pH is ideal for trays and very small pots. The formula suits ornamental plants and vegetables alike, for all seedlings in trays. Depending on the growing technology and plants the substrate may be ordered of very little decomposed white peat or a bit more de-composed brown peat. All plants with average nutrient need may be grown in the substrate because the fertilisation level is medium. The substrate includes starter fertiliser with trace elements. All our professional substrates have wetting agent, this facilitates the initial wetting and also the movement of water and nutrients during the whole vegetation period. In order to guarantee maximum outcome and density, please water the peat before use during the opening of the bag, this enhances the process of decompression. The product is available in compressed small bales and also big bales. Palletised ready products are shipped in sea containers or trucks.

Peat moss is the most forgiving medium with the highest buffering of nutrients and the best water holding ability. Selected quality from our own resources Constant control Ready for use substrates for all growing stages The whole world of horticulture uses white peat as growing media, so far no adequate replacement for peat has been found, it still is the most plant friendly environment available. The high share of organic matter which attracts microflora necessary for nutrient and water transport, high porosity and thus buffering ability, water retention capability are just a few in the row of advantages of peat. Natural white peat can be used as raw material for growing media, for soil improvement and in some cases as growing medium for plants. Our peat moss is of Sphagnum Sp. mosses, the product is a little decomposed, with good features of aeration, porosity and water retention. Product is suitable for making growing media for vegetables and ornamental plants.

Magic Leon is a Organic proprietary fertilizer specially formulated for use on most crops. Through our patented (turan) fusion technology process, organic matter, humic and fulvic acid, NPK with trace elements and sulfur are fused into one nutritionally balanced granule, creating a single source for balanced crop nutrition. Our products can be used in agricultural products, garden plants, fruit trees, ornamental plants, seeds and grains, as well as application from foliar and soil. Product Uses: Soil, base fertilization and micro element deficiencies during the growing season. Bad Weight: 25 kg pp bags and 1 ton bigbags

Our products can be used in agricultural products, garden plants, fruit trees, ornamental plants, seeds and grains, as well as application from foliar and soil. %100 Water Soluable. Ormin K Plus Humate is a dense high biostimulant consists of humic and fulvic acids. The humic and fulvic acids of this preparation stimulate the growth of plants and act as regulators of the soil, particularyl in sandy and non porous (clay) soils. In these types of soils, Ormin K Plus improves the water capacity, the aeration and activation of micro-organisms at the region of the root system. More over, it activates root system growth, increases absorption of nutritive elements. Furthermore, it acts in synegy with other fertilizers, thus intensifies its activity.