Particle counters - Import export

The Trotec PC200 Particle Counter features 6 measuring channels (0.3, 0.5, 1.0, 2.5, 5.0 and 10.0 μm) with three counting modes (concentration, cumulative and differential) and counting efficiency of 50% at 0.3 μm and 100% for particles beyond 0.45 μm. The internal pump allows flow rate of 2.83 l/min (0.1 ft³/min) and the zero count is < 1 particles / 5 min with a coincidence loss of 5%, 2 million particles per ft³ (28.3 liters). The Laser class 3B with wave length of 780 nm and 90 mW is used as a light source while isokinetic probes serve as sample inlet. The device can be used to easily acquire readings on air temperature, humidity, dew point temperature and wet-bulb temperature.

Fluid analysis is a crucial component of any oil management program. Early detection of potential problems can prevent costly repairs and downtime. The LasPaC II makes it possible to detect the ISO Cleanness levels of the hydraulic media. The LasPaC II is available in three different versions. ▪ Compact and Convenient ▪ Twin-laser, 100% Coverage ▪ Integrated Clock ▪ Adaptable - Software Updates ▪ Electric operated flush valve ▪ option of adding an integral moisture / temperature sensor Power Supply ▪ Voltage range: 110 ... 240 V, AC 12 ... 24 V DC ▪ European, UK and US power plug adaptors included Pressure / Viscosity ▪ Pressure range: 2 ... 400 bar / 29 ... 5801 PSI ▪ Viscosity range up to 400 cSt Calibration ▪ ISO Medium Test Dust (MTD) acc. to ISO 11 171:1999 ▪ Analysis range: ISO 8-24, ISO 4406 Code, NAS 1638 Code 2-12, SAE AS 4059 Code 2-12 Laser Sensors ▪ High accuracy laser: 4 ... 6 μm(c) ▪ Standard accuracy laser: 6 ... 68 μm(c) ▪ Measured channels: 4, 6, 14, 21, 25, 38,...

The Gelbo Flex Tester with Particle Counter is to measure the amount of loose fibres (lint) shed from non-woven materials in a 30 second time period of flexing. It is important that non-woven textile materials must have a low tendency to lint. The IDM Gelbo Flex Tester with Particle Counter is a fast and accurate instrument for determining the linting of non-woven materials. This test can also be applied to other materials like tissues. The sample is subjected to repetitive twisting and compression cycles, air is withdrawn from the testing chamber and particles in the air stream are counted and classified with the laser particle counter. Gelbo Flex Tester with Particle Counter consists of two 82.8mm diameter mandrels, one fixed and the other attached to a moveable arm to perform the flexing action. The moveable mandrel twists and compresses the sample at 60 cycles/min of 180° rotation over 120mm of stroke.

The LPM-II-plus Particle Monitor determines the contamination level of the measured fluid on eight size channels and offers precise and complete determination of particle sizes in accordance with international standards. The LPM-II-plus is an automatic, optical particle counter with high-performance LEDs that work on the light obscuration principle. STAUFF recommends recalibrating the measuring equipment at regular intervals. LPM-II-plus-D ▪ with display and keypad LPM-II-plus-O ▪ without display and keypad LPM-II-...-CX ▪ ATEX compliant (Zone 2 / Category 3G)

STAUFF offers on the basis of the SMFS-U-060 / -110 series an elaborate extension of filtration capabilities: the SMFS-U-CM-110. Beside the SMFS-U-060 / -110 filtration systems' benefits the integrated 8-Channel Particle Counter offers a precise analysis and monitoring of the filtration process. Compact in design and easy to operate on the one hand, but also made for permanent use with high flow rates on the other hand, Mobile Filtration Systems are essential tools for the preventive maintenance either to transfer new oil or to purify hydraulic and lubrication oil systems. Replacement Filter Elements ▪ Filter Elements of the NR-630 series ▪ Micron rating available from 3 ... 25 μm Clogging Indicator ▪ STAUFF Clogging Indicator Type HI Construction ▪ Mobile filter system - mobile filter unit Weight ▪ SMFS-U-060: approx. 165 kg / 364 lbs ▪ SMFS-U-110: approx. 177,2 kg / 391 lbs ▪ SMFS-U-CM-110: approx. 220 kg / 485 lbs Nominal Flow Rate ▪ SMFS-U-060: max. 60 l/min / 15 US GPM ▪...

Geiger Counter detects beta particles and gamma rays and X, called ionizing radiation, with great sensitivity. It has Beta particles, and ionization created by X and Gamma radiation, indicating the 'amount of energy, transmitted to the material per unit time.

Principle of operation: Geiger Counter detects beta particles and gamma rays and X, called ionizing radiation, with great sensitivity. It has Beta particles, and ionization created by X and Gamma radiation, indicating the 'amount of energy, transmitted to the material per unit time.

Geiger Counter detects beta particles and gamma rays and X, called ionizing radiation, with great sensitivity. It has Beta particles, and ionization created by X and Gamma radiation.

Geiger Counter detects beta particles and gamma rays and X, called ionizing radiation, with great sensitivity. It has Beta particles, and ionization created by X and Gamma radiation, indicating the 'a

Geiger Counter detects beta particles and gamma rays and X, called ionizing radiation, with great sensitivity. It has Beta particles, and ionization created by X and Gamma radiation, indicating the 'a

Geiger Counter detects beta particles and gamma rays and X, called ionizing radiation, with great sensitivity. It has Beta particles, and ionization created by X and Gamma radiation, indicating the 'a

Lightweight, portable and wearable, this accurate and easy to use optical particle counter is the latest and continually developing innovation in monitoring technology.