Ph measurement equipment - Import export

The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.

Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

Low-noise coaxial measuring cables are used wherever the smallest voltages or charges have to be reliably measured, e.g. in pH measurement technology or nuclear research. The method was developed by bda connectivity and ensures reproducible results. Depending on the requirements, these cables can be supplemented with supply or power supply wires as well as additional shields.

The high-performance optoNCDT ILR2250 laser distance sensor is used whenever large measuring ranges and high accuracy are required. The optoNCDT ILR2250 can be installed at distances up to 100 m, and even up to 150 m with a reflector film. This sensor impresses when measuring dark, structured and poorly reflecting surfaces, while providing stable measurement results to millimeter accuracy. The optoNCDT ILR2250 laser distance sensor is used in transportation, logistics and conveyance technologies as well as automation and the metals industry. This is where the sensor enables reliable measurement results even when it is, e.g., installed at a safe distance from heat emitting measuring objects. In addition, difficult-to-access places via mirrors or through glass sheets can be detected.

Broadley-James offers the widest range of autoclavable and steam sterilisable pH & redox electrodes available on the market today. Electrodes are available in a 12 mm body with a PG13.5 mounting thread and insertion lengths up to 420 mm. Connector options are industry standard S8, K9 or Variopin in both straight and right angle formats. The new F-800 Series offers a zero drift measurement with a noise resistant design and enhanced regulatory documentation.

HEIDENHAIN angle encoders with integral bearing are characterized in particular by very high system accuracy. The integral bearing in the encoders eliminates any effect on measuring accuracy from the bearing of the machine components. The integrated stator coupling in the RCN/RON/ECN series encoders guarantees lowest possible error from the effect of tolerances in the shaft coupling. All angle encoders with integral bearings feature shaft seals that ensure resistance to contamination (IP64 protection). These encoders enjoy an entire spectrum of possible applications in machine tools, measuring machines, telescopes, printing machines and many other areas. Absolute measuring method Hollow shaft diameter (up to 50 mm) Integrated stator coupling Simple installation Typical field of application: Rotational axes with reduced accuracy requirements

The angle encoders without integral bearing (modular angle encoders) ERP, ERO and ERA consist of two components—a scanning head and a graduation carrier, which must be aligned with each other during mounting. The eccentricity of the shaft as well as installation and adjustment therefore have a decisive effect on the achievable accuracy. Modular angle encoders are available with various graduation carriers. The vacuum-compatible encoders are distinguished by the following features: • Air vents • Production in a clean room • Specialized cleaning and packaging • Cable with PTFE insulation and tin-plated copper braiding

The digital magnetometers of the DM Series are based on STL’s unrivalled high resolution ADC technology with 32 bit resolution and 26 bit dynamic range. The magnetometers use fluxgates as their magnetic sensitive elements and have integrated DXS. As a result of consequent digital signal processing, our magnetometers are quasi ideal sensors with digitally corrected geometry and temperature errors. The DM Series provides a measurement range of up to 1 mT, with an ultra precise digitization taking place immediately after the sensor output. All magnetometers measure the 3 orthogonal field components with a maximum sample rate of 10 kHz and offer very low intrinsic noise from 60 pT/√Hz @ 1 Hz down to 6 pT/√Hz @ 1 Hz. The software also offers the total field as an extra virtual channel. Typical error sources like axes misalignment, scaling, offset and phase errors are eliminated to the greatest possible extent due to its consequent digital signal conditioning strategy.

-Static Pressure Test Equipment -LOSS OF PRESSURE TEST EQUIPMENT -WATER METER ENDURANCE (ABRASION) TESTING EQUIPMENT -HEAT METER DURABILITY TEST EQUIPMENT -DOMESTIC WATER METER TEST AND CALIBRATION EQUIPMENT -WOLTMAN WATER METER TESTING EQUIPMENT -HEAT METER TEST AND CALIBRATION EQUIPMENT -MOBİLE TEST UNIT

CERTO Highlights: - High degree of protection - Compact design - Ball-bearing guide High degree of protection - Protection up to IP67 Compact design - Station width of 13 mm Ball-bearing guide - Ball-bearing guide with low friction - High-precision measuring loop - Rugged design Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

METRO highlights: - High accuracy - High repeatability - Various gauging force variants - Long measuring ranges of up to 100 mm High accuracy - System accuracy of ±0.2 µm High repeatability - Repeatability is typically < 0.03 µm for a measuring range of 12 mm ZERODUR scale - Scale expansion is close to 0 ppm/K at between 0 °C and 50 °C Actuation by cable-type lifter - Defined velocity of the plunger - No counting errors - Precision mechanics - Ball-bearing guide with low friction - High-precision measuring loop Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

The angle encoders without integral bearing (modular angle encoders) are intended for integration in machine elements or apparatuses. They are suited for the following requirements: — Large hollow shaft diameter (up to 10 m with a scale tape) — High shaft speeds up to 20000 rpm — No additional starting torque from shaft seals Angle encoders with graduation on glass disk Field of application: High-resolution rotary axes with high reproducibility — Very high number of signal periods — Small mounting space — Small interpolation error and low signal noise — Segment solutions

The angle encoders without integral bearing (modular angle encoders) are intended for integration in machine elements or apparatuses. They are suited for the following requirements: — Large hollow shaft diameter (up to 10 m with a scale tape) — High shaft speeds up to 20000 rpm — No additional starting torque from shaft seals — Segment solutions Field of application: High-resolution rotary axes with high reproducibility — Very high number of signal periods — Small mounting space — Small interpolation error and low signal noise

HEIDENHAIN angle encoders with integral bearing are characterized in particular by very high system accuracy. The integral bearing in the encoders eliminates any effect on measuring accuracy from the bearing of the machine components. The integrated stator coupling in the RCN/RON/ECN series encoders guarantees lowest possible error from the effect of tolerances in the shaft coupling. All angle encoders with integral bearings feature shaft seals that ensure resistance to contamination (IP64 protection). These encoders enjoy an entire spectrum of possible applications in machine tools, measuring machines, telescopes, printing machines and many other areas. Incremental measuring method Large hollow shaft diameter (up to 60 mm) Integrated stator coupling Compact size for limited installation space System accuracy includes the deviation caused by the shaft connection Outstanding dynamic response Simple installation Typical field of application: Rotary tables Swivel heads

ACANTO Highlights: - Absolute measuring method - Protection up to IP67 - Online diagnostics - Serial data transmission with CRC Absolute measuring method - Position value is available immediately after switch-on - No counting errors - No reference runs necessary, because the measured value is always available Compact design - Station width of 15 mm EnDat 2.2 interface - Additional data on the status of the length gauge is available (diagnostics, warnings, alarms) - Serial data transmission with CRC Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

• from high quality plastics • for all common spirits • for 0,7 - 1,0l bottles • not anise-resistant • Note: measure pourers only function flawlessly with unsweetened spirits