Construction products - Import export

Spunbond polypropylene nonwovens are mainly used in medicine, hygiene, cosmetics and pharmacy. They are applied as independent materials, offering low masses with relatively high strength properties. They can also be bonded with other materials (meltblown nonwoven), gaining completely new properties. These compositions are mainly used for hygienic applications, products for construction and the automotive industry. Application: spunbond nonwovens are applied in products such as, protective and medical clothing: disposable clothing, gloves, hats, caps, footwear protectors, surgical clothing, surgical field underlays and foiled underlays, disposable sheets and foiled sheets, single-layer medical masks, surgical gowns, shoe covers, sanitary pads, diapers, tampons, bandages, patches, dressings, compresses, linings, pockets, partitions, masking elements in products such as bags, belts, cases.

Bitumer Elaston 2K is a two-component, liquid and flexible fiber-reinforced asphalt-rubber membrane. The high dry matter content mass allows the creation of a durable protective coating that effectively protecting building structures from moisture contained in the soil. Elaston 2K is a product that forms a flexible corrosion barrier with strong adhesion to the surface to which it is applied. Bitumer Elaston 2K can be used: •to isolate water leaks in covered areas wet areas such as bathrooms, kitchens, toilets, etc, •in external insulation of ground walls, basements and underground warehouses, etc, •along with reinforcement such as fiber mesh, non-woven polyester, etc. in cracked surfaces, •in insulation applications where strength is required-resistance to high water pressure, •on all horizontal and vertical surfaces.

Big bags, also known as flexible intermediate bulk containers (FIBCs), offer a practical alternative for transporting and storing bitumen. These large, durable bags, typically made of woven polypropylene, provide a secure and convenient means of handling bitumen throughout its journey from production to construction site.

Product Specifications: Construction: Sturdy frame made of high-quality materials, ensuring durability and stability. Lighting: Built-in LED spotlights that illuminate the products, highlighting their details and exclusivity. Shelves: Multiple horizontal shelves offering ample space for displaying eyewear. The shelves are easy to clean and scratch-resistant. Drawers: Spacious drawers at the bottom of the display, ideal for storing additional products or marketing materials. Finish: Smooth and elegant finish that is pleasant to touch and aesthetically pleasing. Interactive Elements: Built-in screen for displaying advertisements and multimedia. Modularity: Easy assembly and disassembly, facilitating transport and installation in various locations. Style: Minimalist and modern design, perfectly blending with luxurious store interiors.

Nowadays, engineers use highly specialized licensed software. Due to the construction complexity of certain diagram types or providing a strength calculation directly on the designs and parts blueprints, such software is a completely separate area of the engineering arsenal.Professional strength expert’s specialization allows taking a completely new look at the preliminary calculations of production and construction. Thanks to the masterful work of such specialists, each manufacturer may apply the famous «Rockefeller formula» when saving on one rivet or a couple of millimeters of material save millions on an industrial scale. Expert calculations of structural strength, presented in several versions, depending on the shape and material of the part, are extremely voluminous and require plug-ins to complement engineering programs. Services included in the professional strength engineer portfolio: Dlubal RFEM 5; ANSYS; NX Nastran; Robot Structural Analysis; Static and Seismic Calculat

The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification f construction products and building elements). The fire resistance was tested as per PNEN 136622001P (Fire resistance tests for service installations Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA12 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN100, DN125, DN160, DN200, DN250, and DN315. All fire dampers have a pull spring control gear and a fusible thermal trip (in FDA12T) or a returnspring actuator coupled with a thermal trip (in FDA12M).

The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification f construction products and building elements). The fire resistance was tested as per PNEN 136622001P (Fire resistance tests for service installations Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA12 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN100, DN125, DN160, DN200, DN250, and DN315. All fire dampers have a pull spring control gear and a fusible thermal trip (in FDA12T) or a returnspring actuator coupled with a thermal trip (in FDA12M).

The FDA212 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN200, DN224, DN250, DN280, DN300, DN315, DN355, DN400, DN450, DN500, DN560, DN600, DN630.

The FDA212 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN200, DN224, DN250, DN280, DN300, DN315, DN355, DN400, DN450, DN500, DN560, DN600, DN630. All fire dampers have a torsion spring trip (in FDA212T) or a returnspring actuator coupled with a thermal trip (in FDA212M).

The FDA212 square fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal sizes 160x160 – 1000x500 mm. All fire dampers have a torsion spring trip (in FDA212T) or a returnspring actuator coupled with a thermal trip (in FDA212M).

Round ventilation duct made of expanded polypropylene (EPP). The most important features of the product are rigid construction, low weight, easy assembly and good thermal insulation. EPP ducts, used, for example, as sections of the supply and exhaust ventilation systems with heat recovery, do not require additional insulation. The system eliminates the formation of thermal bridges. Ducts na fittings do not require additional couplings. Lenght EPP ducts 1 m sections Diameters 125, 160 and 200 mm. Wall thickness 43 mm Thermal conductivity 0.039 W / m*K Airtightness class ATC2 (old D) @110Pa acc. to PNEN 17192201901

Round ventilation duct made of expanded polypropylene (EPP). The most important features of the product are rigid construction, low weight, easy assembly (integrated malefemale coupling) and good thermal insulation. EPP ducts, used, for example, as sections of the supply and exhaust ventilation systems with heat recovery, do not require additional insulation. The system eliminates the formation of thermal bridges. Lenght EPP ducts 1 m sections Diameters 125, 160 and 200 mm. Wall thickness 15 mm Thermal conductivity 0.039 W / m*K Airtightness class ATC2 (old D) @ 90Pa acc. to PNEN 17192201901

We have been specializing in welding of construction for marine and other products used in the maritime sector for years. Structures manufactured for the maritime sector are of high quality and in accordance with the international standards. We have produced machines called scrubbers – fume scrubbers used in maritime industry and many other products customized according to our customers’ projects. We manufacture high quality steel constructions for marine in accordance with the international standards: ISO 3834-2, EN 1090-2 and EN 1090-3, Offshore Standard DNV-OS-C401 and ISO 9001:2015, ISO 14001:2004.

We have been specializing in constructions for marine and other products used in the marine sector for years. We manufacture of Flotation Units. The pruduct made from stainless steel and constituted waste water treatment systems.

The certification of gauges is based on checking that the instrument maintains the prescribed measurement tolerances and MSA processes that confirm the stability of the measurement process of the gauge used in different conditions and by different people. Tests and control and measurement devices undergo the process of checking the current state, and then we carry out the calibration process and recertification. We carry out the certification and calibration process of the gauges in accordance with the procedures resulting from ISO 17025 , which confirms the credibility of our work. At the client's request, we perform work in accordance with the requirements and processes resulting from the individual features or parameters of a given measuring instrument. Calibration of the gauges Calibration is an integral part of the construction and production processes of control and measurement devices and gauges, and is also used during service or repair work.