Ventilators and fans - Import export

Anemostat is a component that is mounted on the supply vents of a mechanical ventilation system. Its main function is to distribute air from outside to the interior. It performs well in buildings where there are frequent problems with proper air circulation. 50 years of DOSPEL'S manufacturing experience is the highest quality guarantee

The EURO 2 axial duct fan with dimensions of fi 120 mm is designed for ventilation of residential, office, catering and small industrial spaces. Made of ABS plastic, which provides protection against adverse weather conditions. Produced in Poland and based on Polish electronics. 5-year manufacturer's warranty. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

Industrial Fans - Comprehensive production

Domowy fan in dimensions fi 120 mm with a white cover is characterized by quiet operation. Designed for wall mounting due to the use of a plain bearing. The fan is made of ABS plastic. Modern design and glass finish will emphasize the character of a given interior. The fan has an IPX4 protection level, which means that it is resistant to water splashes from various directions and class II insulation, so it is protected not only against direct but also indirect contact thanks to the introduction of additional insulation. The fan has a timer switch that keeps the fan running for a certain period of time after we supposedly turn it off, so we can be sure that when we leave the room, the fan will continue to effectively ventilate the room for the time set on the clock.

Modern and easy to use wall fan with dimensions of 200 mm. It has two versions of the motor speed LS - low speed and HS - high speed. The fan is made of ABS plastic. Varnishing with a UV coating means that the white-dyed fan does not turn yellow, but retains its original color. The fan has an IPX2 protection level, which means that it is resistant to water ingress with drops falling vertically on the device tilted by 15o from the vertical position and class II insulation, so it is protected not only against direct but also indirect contact thanks to the introduction of additional insulation.

The M-Box fan is used for general ventilation in rooms where people stay. All motors used to drive the fan have thermal winding protection against overload. The fan capacity is regulated by voltage regulation or by means of a frequency converter. It was produced in Poland. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

Variable section connector made of white ABS plastic. The connector with dimensions of 104/110x55mm connects flat ducts D/P 110x55mm with round ducts D/O 104mm or ventilation grilles with 104mm diameter. The connector with dimensions of 125/220x55mm connects flat ducts D/P 220x55mm with round ducts D/O 125mm or ventilation grilles with 125mm diameter. The elements of the ducts are joined using the "push-in" method without the need for sealing. Element made in Poland. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

Round mounting bracket made of white ABS plastic. The holder is available in fi 100mm, 104mm and 125mm. It is used to attach round D/O ducts to a stable surface. Element made in Poland. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

Round tee made of white ABS plastic. The T-piece is available in fi 100 and fi 125 versions. It is used to connect circular ventilation ducts D/O 100 or ventilation grilles. It is used to connect circular ventilation ducts D/O 125 or ventilation grilles. The elements of the ducts are joined using the "push-in" method without the need for sealing. Element made in Poland. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

Round duct connector with damper made of white ABS plastic. The damper regulates the air flow in the ventilation system. The elements of the ducts are joined using the "push-in" method without the need for sealing. Connector made in Poland. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

The KZP DOSPEL 220x55 ventilation endings with an external flat grille offer a practical solution for ventilation systems. Equipped with a damper, these grilles prevent the backflow of air, ensuring efficient airflow control. They are easy to assemble and specifically designed for use in low and medium pressure ventilation systems. With a traditional look, these grilles can seamlessly blend into various building types and architectural styles. DOSPEL's 50 years of experience in production guarantee the highest quality standards, ensuring reliability and durability. Choose the KZP DOSPEL 220x55 ventilation endings with an external flat grille for effective airflow management and a visually pleasing solution for your ventilation needs.

The DR DOSPEL 200x200 ventilation endings with inspection doors are designed for use in both private homes and public buildings. These doors provide convenient access to water meters, siphons, and various types of installation valves, making maintenance and inspections easier. Constructed with the best materials, these ventilation endings are built to withstand regular use and offer long-lasting durability. They are available in a variety of colors to suit different aesthetic preferences and blend seamlessly into any environment. With DOSPEL's 50 years of experience in production, you can be confident in the highest quality standards. Choose the DR DOSPEL 200x200 ventilation endings with inspection doors for reliable and efficient access to crucial components in your residential or commercial building.

Innovative ventilation grille with shutter. It is distinguished by an elegant appearance. Practical and comfortable. The mechanical shutter is opened and closed with two strings. It is very easy to adjust. The ventilation grille protects the room against dirt that could escape from the ventilation system to the outside. 50 years of experience of DOSPEL in its production is a guarantee of the highest quality.

The metal diffuser is the only visible element of the ventilation system. You can place it on the wall, ceiling or floor. Thanks to this, you can easily match this element to the overall decor of the room. The metal diffuser is perfect for both modern and traditional interiors. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

The LUNA 350 Eco ventilation unit with a capacity of 350 m3 is a recuperator that meets the economic expectations and needs of customers. This product is characterized by an unbeatable price while maintaining a very high level of heat recovery up to 95% and low energy consumption (energy class A). The control panel is perfect for single-family houses and multi-family buildings. Thanks to the use of a special material for the construction, the device is very well soundproofed, which makes it practically inaudible to users.

Rotating chimney cowl protects the chimney against the harmful effects of weather conditions such as: wind, rainfall, snow or other impurities that may get inside the chimney. Thanks to special blades, it perfectly uses the wind power and prevents the phenomenon of reverse thrust. The rotating cowl is characterized by a long service life. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

Kom is used to distribute warm air to rooms using insulated ducts. Suitable for continuous operation. It is equipped with a thermostat that allows you to adjust the activation temperature. The modern design of the turbine ensures high efficiency and reliability. Single-phase asynchronous induction motor adapted to speed regulation, thermally protected. Casing made of galvanized sheet steel resistant to corrosion and mechanical damage, insulated with mineral wool.

Axial fan with dimensions of fi 100 mm. It has a very low energy requirement. Equipped with ball bearings that not only reduce noise, but also ensure a long period of trouble-free operation of the fan. Modern design allows it to be used in even the most demanding interiors. Fan for ceiling or wall mounting. Produced in Poland and based on Polish electronics. 5-year manufacturer's warranty. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

Axial fan POLO 4 with dimensions fi 100 mm in the standard version. Made of high quality materials. Wall or ceiling mounting possible due to the use of a ball bearing. The fan is made in Poland and based on Polish electronics. 5-year manufacturer's warranty. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

Ventilation duct made of aluminum reinforced with spirally wound steel wire, which stiffens the duct and gives it the right shape. The cable is resistant to temperatures in the range -30°C÷+250°C. The pipe is available in diameters of 80mm, 100mm, 110mm, 115mm, 120mm, 125mm, 130mm, 140mm, 150mm, 160mm, 200mm, 250mm and 315mm. Standard length before stretching is 1m, and after stretching is 3m. Element made in Poland. 50 years of DOSPEL experience in production is a guarantee of the highest quality.

Indoor air handling units are designed for indoor operation in premises such as machine rooms, basements, etc. The housings of the air handling units are made of sandwich panels filled with rigid polyurethane foam or mineral wool, covered with galvanized sheet on both sides. The thickness of the panel depends on the size of the air handling unit. Sandwich panels provide excellent thermal insulation and meet strict acoustic requirements, providing sound insulation of 28-30 decibels. The units use high efficiency centrifugal fans with backward curved blades located directly on the motor shaft, ensuring optimal performance of the system. Their speed is controlled smoothly by means of a frequency converter. For climatic zones with moderate-cold climate the northern version of the casing is used. Panel thickness 50 mm, inspection doors with hinges and rotary lock, rubber seals, air damper with electric heating, profile with thermal lock.

Ventilation duct made of aluminum reinforced with spirally wound steel wire. which stiffens the canal and gives it the right shape. The cable is resistant to temperatures in the range -30°C÷+250°C. The pipe is available with a diameter of 80mm. 100mm. 110mm. 115mm. 120mm. 125mm. 130mm. 140mm. 150mm. 160mm. 200mm. 250mm and 315mm. The standard length before stretching is 1m. and after stretching 3m. Element made in Poland. 45 years of experience of DOSPEL in production is a guarantee of the highest quality.

Ventilation duct with thermal insulation made of reinforced aluminum foil. It guarantees minimal heat loss and reduces the noise level. The temperature resistance of this cable reaches 250°C. Available in diameter 100mm. 125mm. 150mm. 160mm. 200mm. 250mm and lengths of 5m or 10m. The outer cover is a laminate of aluminum foil. Element made in Poland. 45 years of experience of DOSPEL in production is a guarantee of the highest quality.

Patented "Double - flow patent" system used in our filters. thanks to its pioneering construction technology. that we can filter the air much more effectively than the filters available on the market so far

Problem with dry air? SPA 200 is a device designed to humidify the air, mounted behind the recuperator to the supply duct. First of all, the use of this type of equipment is intended for single-family, multi-family and office buildings. The humidifier is characterized by a low noise level and a compact design

The heaters are standard equipped with an electronic control module that maintains the temperature set by means of a potentiometer located on the front panel of the heater. The element that activates the electric heaters is a triac, thanks to which the heaters are always turned on when the current reaches zero. The safety of the heater is ensured by three protections, an electronic module controlled by a temperature sensor, a pressure sensor that turns off the heaters if there is no air flow in the duct and a thermocouple turns off the heaters when the temperature rises above 75°C

Water heaters are designed to heat the ventilation air supplied to the rooms. They can be used in residential, public and industrial buildings. The device has been adapted to work with air handling units.

The LUNA 250 Eco ventilation unit with a capacity of 250 m3 is a recuperator that meets the economic expectations and needs of customers. This product is characterized by an unbeatable price while maintaining a very high level of heat recovery up to 95% and low energy consumption (energy class A). The control panel is perfect for single-family houses and multi-family buildings. Thanks to the use of a special material for the construction, the device is very well soundproofed, which makes it practically inaudible to users.

MATRIX is, above all, great efficiency up to 435 m3 with a Ø200 mm connection. It is characterized by simplicity of assembly and configuration. The ease of use of this recuperation unit is primarily bilateral access to filters and by-pass, but also a user-friendly application for mobile devices and a 7-inch, intelligent control panel. The comfort of use is ensured by complete soundproofing thanks to the EPP housing used, while the double filters in the EU5 hypoallergenic class ensure phenomenal filtration of dust particles and many allergens, such as pollen and fur. The UVC lamp and ozonator make the supplied air aseptic, free from viruses, bacteria, fungi and pathogens. Thanks to the use of high-quality components, such as a cross-flow heat exchanger and double EC DC motors, we provide an 8-year warranty.