Rail welding machines - Import export

Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...

Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...

Remplacement of Sleepers Remplacement of the Rubber Soles-Plates (Using of Pad Scrapers - See the Details on Hand Tools) Installation of Rollers under rails to free stress in continuous lengths of welded rails. Hydraulic Rail Lifting Machine - LVR.20 - Lifting Capacity = 1 Ton - Lifting Stroke = 120 mm - HONDA 4-stroke petrol engine = 2.4 KW - Dimensions = 200 x 85 x 90 cm - Weight = 200 Kg Mechanical Rail Lifting Machine - LVR.10 - Lifting Capacity = 1 Ton - Lifting Stroke = 120 mm - Manually controlled Jack - 2 Auto-Tighten Rail Tongs - Dimensions = 200 x 85 x 90 cm - Weight = 120 Kg OPTIONS - Hydraulic Units - Ref. CHT-140 or Ref. CHT-141

GOGS CO., LTD. has received presidential award in 2008 for our patent technology at KINPEX. Our machine is highly specialized in heavy industry such as marine engineering, shipbuilding and etc. Our machine SHI(Samsung Heavy Industry), STX shipbuilding, Seongdong Shipbuilding & Marine Engineering, Hanjin Heavy Industries and etc. - 2-CORE control using PLC-CSI communication technology - High quality welding of 1mm thin plate at a distance (up to 100mm) - Lightening and decrease in failure rate using the All In One Cable - Multi-feeder that is possible to set operation conditions of a welding machine (Control of crater current and voltage, Power supply for auto carriage providing error messages) - Memory function of welding conditions - IoT function for smart control - Maximization of interlocking with auto welding machine (Smart welding Integration System(C-SWIS)

The ALW is a comfortable, ergonomic, and compact seated workstation that offers plenty of legroom, and which can be adjusted to the height of the operator via the height-adjustable foot plate. The observation lens offers a variable viewing angle from 10° – 50°, thus ensuring comfortable working. The closed, laser-proof housing makes the ALW a laser-protected workplace that can be used in a normal production environment without additional safety precautions. The laser system is easy to operate. In addition to configuring via the display, the laser parameters can be adjusted via the patented multifunction footswitch or adapted accordingly during welding. The large doors of the ALW can be opened wide. This facilitates easy loading.

with 6kW fiber laser and MP Flex loading and unloading for sale in top condition. C0z3xdk3ol

Advantages of Laser welding: High welding speed (1-10 m/min). Welding without edges grooving. Minimal warp distortions. Minimal heat-affected zone. Applicable for welding of wide variety of materials. Welding process versatility. Possibility of automatization. Energy and wire saving. Comfortable labor conditions, working area maintained clean. Readme! Laser welding has a special property – it forms a high-density welding joint. Porosity and other defects that are inhere in other welding methods, are absent using this technology.

Advantages of Laser welding: High welding speed (1-10 m/min). Welding without edges grooving. Minimal warp distortions. Minimal heat-affected zone. Applicable for welding of wide variety of materials. Welding process versatility. Possibility of automatization. Energy and wire saving. Comfortable labor conditions, working area maintained clean. Readme! Laser welding has a special property – it forms a high-density welding joint. Porosity and other defects that are inhere in other welding methods, are absent using this technology.

We offer laser cutting of: - Structural steel - up. to 15mm thick - Stainless steel - up to 8 mm - Aluminum - up to 8 mm

Our laser tube cutting service includes all major tube and section profiles – including large tube laser cutting – with specialist profile capabilities accommodated with ease. Continuous investment ensures we can always offer our customers the broadest capabilities, so they remain at the forefront.

Achieving a cutting tolerance of +-0.25mm, lasers are firmly established as the accurate cutting technology. Capable of achieving fine contours and intricate cuts in seconds, laser cutting is leading the way in manufacturing efficiency gains.

We produce electrofusion machines that can weld diameters from 20mm to 1600mm.

Welding construction as required No matter whether pipes, small parts or large components - the welding construction department of Siempelkamp Maschinenfabrik GmbH is able to fulll your wishes thanks to its high-performance machinery. Our welding specialists are able to produce your components using MIG, MAG, UP, TIG, Emanual and electro-slag processes. Numerous certicates attest to the highest quality of our welding work. Key features procedure: MIG, MAG, UP, TIG, E-manual, electro-slag Component weight up to 100 t Pipe forming up to Ø168.3 mm Pipe neck up to Ø270 mm Advantages procedure: MIG, MAG, UP, TIG, E-manual, electro-slag Component weight up to 100 t Pipe forming up to Ø168.3 mm Pipe neck up to Ø270 mm Application of the most ecient welding process for your component Highest quality standards through certied welding work economic production of tubes by our forming and necking machine

TORUS-255 has the widest possible range of arc welding currents (from 20 to 255 A), which makes it possible to use it both for welding very thin metals, including in the TIG mode (welding with non-consumable electrode), and for continuous welding of large metal structures using an electrode up to 6 mm in diameter. The operating margin in the ТОРУС-255 device is such that it can be effectively used not only for the MMA and TIG modes, but also in the surfacing and cutting modes. At the same time, the weight of the device itself is traditionally not big – only 5.7 kg. Like all devices of the ТОРУС line, ТОРУС-255 has increased reliability with all its maximum parameters. A 3-year manufacturer’s warranty is a guarantee of its high performance in the most severe operating conditions.

ТОРУС-200 is a modern welding inverter device based on a digital high-frequency mains voltage transducer. The device is designed for electric arc welding of low-carbon, alloy and stainless steels, it can operate in TIG and MMA modes. Obtaining high-quality welding joints does not require high qualifications from the employee, which is important for novice welders. In short-circuit mode, the device almost does not consume current, which allows it to be powered from petrol power units with a capacity of 4 kW (6 kVA) and a household network with slumps up to 165 V. ТОРУС-200, like other inverter welding machines of the ТОРУС line, allows you to get welding with stable parameters. It is characterized by: small weight – 5 kg, high performance factor and the ability to work with electrodes with a thickness from 1.6 to 5 millimeters. In addition, the ТОРУС-200 welding inverter is designed for continuous operation not only indoors, but also outdoors.

The Frame Welding Machine is made of welded parts of different sizes and is designed to obtain the desired special H profiles. The machine body and the welding heads are fixed and the workpiece provide to be welded on both sides of the part to be welded by moving by means of driven conveyors. The hydraulic cylinders in the system provide the positioning of the H profile placing and fixing during welding.The system has adjustable backrests and accessories for the roofing of the conveyor group.The system has a hydraulic piston loading unit. The system might turn beam 90 degree with maximum weight and maximum dimensions by means of chain or mechanical structure.

The KLN QSW 400 L is a modular laser welding machine. The advantage of the modular structure is that the central laser welding machine can remain unchanged in the various welding tasks and only the housing and its frame structure must be adapted to the actual welding task. Thus, a well-tried laser welding unit can always be used. Moreover, adaptions to other welding tasks can be easily integrated, e. g. with rotary table, tool carrier, conveyeor or sliding table. Laser: Water-cooled diode laser with 300 W optical output power Wave length 980 nm ±10 nm Pilot beam at 650 nm ±15 nm (<1 mW) Optical fibre suitable for wave length 780-1030 nm Focal distance of collimation 58 mm Focal distance f-theta objective 635 mm Operating distance 728 mm Operating field (scan field) 415 mm x 415 mm

It’s designed upon you weld cylindrical, conical and rectangle shaped bended frameworks and in shape of flat slab metal sheet and plaque linearly. Frameworks that are between 200-3000 mm diameters can be welded on different types of machines easily. Its production can be made from the length of 0.5 meter to 4 meters. Upon customer demand the length can be increased. As to application method, TIG, MIG and submerged welds can be adapted. Materials’ like boiler, thermosiphon, solar power boilers, cooling tanks, natural gas funnels, lpg tubes etc., height welds are made on this machine.

Our latest additions to the line are the Swiss Bystronic Fibre Laser Cutting Machine 3 kw) and Bodor Precision Laser Machines 150 W, CO 2 We provide quality, high precision laser cutting and engraving service on a very competitive price This cutting method is very cost and time effective Products are highly customizable, unique shapes and various materials can be cut, such as plastic, wood, metal, etc.

Fiber optic welding machine L-WELD is designed to weld metal plates and pipes. Fiber laser creates a high-frequency beam, which is focused in one spot. This concentrated laser source provides thin, deep welding and is of high speed.

Length Welding Machine is designed for length welding of cylindrical, conical and rectangular bent parts and flat plate sheet metal and plates. Parts between 100-3000 mm diameter can be welded on different machine types. The length welding machine, which offers the ability to make welds internally and externally, is produced from 1 meter to 4 meters long. In some special cases, the length may increase even more. Currently, workpieces with a minimum wall thickness of 0.60 mm can be welded. In submerged arc applications, the wall thickness is up to 20-25 mm. Boilers, water heaters, solar energy boilers, cooling tanks, natural gas chimneys, LPG tubes etc. Length welds of materials are made on this machine. Submerged arc, gas metal, tig etc. Welding systems work synchronously with our machine.

Being able to walk on a suspended type tank Single-sided tank welding Single operator control 1000 – 3000 mm plate welding Tank welding machine is an automatic tank welding machine designed for welding cylindrical structures that can weld with submerged arc welding in the side position (3 o’clock). The welding unit is fixed on a cabinet. On the upper floor of this cabin, where all safety conditions have been provided for the operator, there are motor and gear systems that move the system on the hardware sheet. Tank Welding Machine enables horizontal circumferential welding of large storage tanks with Submerged Arc welding machine. • The minimum diameter it can weld is 4.5 meters. • The lowest sheet thickness that can be welded is 6 mm. The outer cover is produced to protect the user from the external factors of nature. Our Tank Welding Machine is designed to weld either internally or externally.

Welding inverters of the PRO series are light in weight and dimensions. The metal housing reliably protects the internal components, making it suitable for use on the construction site. Inverters are capable to operate with all brands of stick electrodes from 1.6 to 5 mm and 6 mm (VIKING 250PRO, VIKING 270PRO), including the УОНИ 13/55 brand. The minimum arc welding current is 30 A, the maximum one corresponds to the model. TP at maximum current for all models is 60%. Mains voltage range is 160 ... 260 V.

Machine is ideal for welding process of PVC plastic profiles at four corners. Fully automatic four corner welding of PVC window profiles at an angle of 90° Welding of a complete window frame or sash in one cycle All profile related welding parameters are individually programmable User-friendly operating system compatible to all optimization programs Parameters are set easily by means of 8’’ LCD color touch screen Automatic line can be made by combining with Cooling Unit (SA 250),Corner Cleaning Machine (CNC 608-610) and Rotating Robot (SA 260) Automatically setting of standard (2 mm) or seamless (0.2 mm) welding options Long time of Teflon using period by means of the roller system Automatically discharging of the frames after welding operation Colored and white profiles selection modes Saving of time by means of practical mold change system Operator safety barrier Adjusting the heat between 0-300°C via electronic thermostat Minimum welding measurement : 400 x400 mm