Die heads - Import export

Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

Ball-end thrust screws with full ball are used when a clean, polished contact surface is required.

The Hygienic DESIGN fastening system was specially developed for use in food processing facilities. Special attention was paid to the cleaning-optimised geometry and a surface finish of Ra ≤ 0.8 µm. The quick and easy installation due to a pre-installed sealing washer rounds off the overall package.

Universal fastening element. The hammer-headed screw is twisted into the profile slot and so can mounted into an existing systems at a later date. The serrations break through the anodised film and creates a secure, electrical conductive connection.

Ball lock pins are used for easy fastening or joining of components. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. When the push button is released, the balls lock the connection securely. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values.

Steel grade 8.8, black. Stainless steel A 2-70, bright. Drawing reference: L2 = approx. 2x thread pitch

The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other. The floating joint unit is mainly used when: a temperature change alters the dimensions of a component assembly inaccuracies occur manufacturing tolerances must be compensated for the position of the components varies due to dynamic loads

Ideal elements for fastening cladding panels, Plexiglas covers etc. The oversized flange and the thread undercut ensure a stress-free, uniform force distribution on the respective surfaces. Projecting edges are kept to a minimum by the head height being kept as low as possible. An open-end spanner is used to screw the fastener in. The surface of the ball head screw is polished and, with regard to design optimised for the use in hygienic environments. The surface is polished to a surface finish of less than Ra 0.8 µm. Dirt and residue from products or cleaners seldom adheres and easy cleaning is ensured.

EN ISO 7380-1 Form A: Hexagon socket button head screws. EN ISO 7380-2 Form B:Hexagon socket button head screws with collar.

The surface of the hexagon head bolt is polished and, with regard to design optimised for the use in hygienic environments. The bolt head is convex on the top face and the collar has a conical formed top surface. Instead of troublesome embossing or indentations, the bolt head is smooth with a surface finish of Ra 0.8 µm. Dirt and residue from products or cleaners seldom adheres and easy cleaning is ensured.

Form A with full ball is used when a clean, polished contact surface is required. Surfaces which are not flat and parallel can be firmly clamped or supported with Form B with flattened ball, the movable ball can adapt itself up to 9°. Drawing reference: Form A: full ball Form B: flattened ball Form BV: flattened ball, rotation lock Form F: serrated flattened ball Form FV: serrated flattened ball, rotation lock

Surfaces which are not flat and parallel can be firmly clamped or supported with with a flattened ball, the movable ball can adapt itself up to 9°. Longer versions have been designed especially to be glued in. This allows mechanical connecting elements with external thread to be made cost-effectively for small and medium-sized series. The ball has a rotation lock.

ENGINE MODEL F2CFE613L A026, F2CFE613C A011, F2CFE613N A010, F2CE9684E E017, F2CFE613C B004, F2CFE613N A011, F2CFE614G B002, F2CFE613C B006, F2CFE613R A021, F2CFE614G B003, F2CFE613C B041, F2CFE613S A020

Its recommended height is 120 cm and the width can be selected from all standard sizes, depending on the dimensions of the bed base and mattress. The Aarhus HDB headboard can be attached to the bed or to the wall with special brackets, and the set also includes legs that can be screwed on, if desired.

N ° 1 factory nova adduction head with 40 mm internal passage Top or side attachment Shaft with thread on request With adjustment screws With wear bush on gasket work area

The main purpose is to attach materials and equipment to concrete, natural stone, and brick. This is a simple and quick installation, namely: it is installed in a pre-drilled hole corresponding to the diameter and length of the anchor; it is wedged with a spacer cone when screwing into the anchor: a metal element (bolt, stud).

Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285

Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285

Material: PC Colour: transparent

Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285

FRIMO PURe Mix mix heads are available as two-component or multiple-component mix heads for various PU product manufacturing. Different sizes for the smallest and the largest output rates are available. FRIMO offers a patented PU spraying system for the production of high quality PU surfaces, such as for automotive interiors.

Head Cover (HC1) Wide Elastic Fastener

M6.4 x 25mm Dome Head Blind Rivets Steel Head Steel Mandrel Pop Rivets DIN 7337. A wide range of Bright Zinc Plated fasteners including Dome Head Blind Rivet Steel Bright Zinc Plated DIN 7337 at cost-effective price available from A2Z Fasteners.

M6.4 x 20mm Dome Head Blind Rivets Steel Head Steel Mandrel Pop Rivets DIN 7337. A wide range of Bright Zinc Plated fasteners including Dome Head Blind Rivet Steel Bright Zinc Plated DIN 7337 at cost-effective price available from A2Z Fasteners.

M6.4 x 16mm Dome Head Blind Rivets Steel Head Steel Mandrel Pop Rivets DIN 7337. A wide range of Bright Zinc Plated fasteners including Dome Head Blind Rivet Steel Bright Zinc Plated DIN 7337 at cost-effective price available from A2Z Fasteners.

M3.2 x 20mm Dome Head Blind Rivets Steel Head Steel Mandrel Pop Rivets DIN 7337. A wide range of Bright Zinc Plated fasteners including Dome Head Blind Rivet Steel Bright Zinc Plated DIN 7337 at cost-effective price available from A2Z Fasteners.

M3.2 x 18mm Dome Head Blind Rivets Steel Head Steel Mandrel Pop Rivets DIN 7337. A wide range of Bright Zinc Plated fasteners including Dome Head Blind Rivet Steel Bright Zinc Plated DIN 7337 at cost-effective price available from A2Z Fasteners.

M3.2 x 16mm Dome Head Blind Rivets Steel Head Steel Mandrel Pop Rivets DIN 7337. A wide range of Bright Zinc Plated fasteners including Dome Head Blind Rivet Steel Bright Zinc Plated DIN 7337 at cost-effective price available from A2Z Fasteners.

M6.4 x 30mm Dome Head Blind Rivets Steel Head Steel Mandrel Pop Rivets DIN 7337. A wide range of Bright Zinc Plated fasteners including Dome Head Blind Rivet Steel Bright Zinc Plated DIN 7337 at cost-effective price available from A2Z Fasteners.