Self-braking motors - Import export

The Swing Carousel consists of a rotating structure supporting one row of swinging chairs. The whole structure is hot-dip galvanised, with exception of the central column and is covered by hand painted decorative fibreglass panels on which lighting is fixed. The swinging chairs and their supporting chains are made by stainless steel while the seat is made out of fiberglass. The covering roof is made up by a flame-retardant canvas. The rotation is made by one self-braking AC motor.

The Swing Carousel consists of a rotating structure rising along a central column and supporting three rows of swinging chairs; 16 double seat chairs are located on the inner row for accommodation of one adult and one child. The whole structure is hot-dip galvanised, with exception of the central column and is covered by hand painted decorative fibreglass panels on which lighting is fixed. The swinging chairs and their supporting chains are made by stainless steel. The covering roof is made up by a flame-retardant canvas. The rotation is made by two self-braking AC motors on top and one AC motor at bottom of central column. All motors are controlled by frequency drives and the whole system is operated by PLCs.

The Swing Carousel consists of a rotating structure rising along a central column and supporting three rows of swinging chairs; 12 double seat chairs are located on the inner row for accommodation of one adult and one child. All decorative panels are made out of fibreglass with galvanized-steel frame. All decoration are hand made and all painting one by one hand-brush executed. Lighting is permanently mounted on fibreglass elements. The swinging chairs and their supporting chains are made by stainless steel and fibreglass shells. The covering roof is made up by a flame-retardant canvas with decorative fibreglass “flat”cover. The rotation is made by one self-braking AC motors on top and one AC motor at bottom of central column. All motors are controlled by frequency drives and the whole system is operated by PLC’s.

The Swing Carousel consists of a rotating structure rising along a central column and supporting two rows of swinging chairs for accommodation of 1 passenger each. Double seats is also possible, to accommodate one adult and one child. All decorative panels are made out of fibreglass/alluminium with galvanized-steel frame. All decoration are hand made and all painting one by one hand-brush executed. Lighting is permanently mounted on decorative elements. The swinging chairs and their supporting chains are made by stainless steel and fibreglass shells. The covering roof consist of decorative fiberglass globe. The rotation is made by one self-braking AC motors and lifting by two hydraulic pistons.

The Swing Carousel consists of a rotating structure rising along a central column and supporting two rows of swinging chairs; 10 single adult chairs are located on the outer row for accommodation of one adult. Double seats can also be installed on place of one adult and one child seats. The whole structure is hot-dip galvanised, with exception of the central column and is covered by hand painted decorative fibreglass panels on which lighting is fixed. The swinging chairs and their supporting chains are made by stainless steel while the seat is made out of fiberglass. The covering roof is made up by a flame-retardant canvas. The rotation is made by one self-braking AC motor for a maximum rotation speed of 8 rpm, which is controlled by frequency drive.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Double Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The two overlapped floors structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The second floor is accessible through two staircases. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round, Liberty style. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Double Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The two overlapped floors structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The second floor is accessible through two staircases. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

The Galleon Race ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail, connected to a central rotor by radial arms (sweeps). The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. The ride moves by means of 1 self-braking A.C. gear-motor fixed to the central rotor and controlled by Frequency Drive.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twenty cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 5 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 3 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

The Matterhorn ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body square structure supporting the central rotor and housing all electric and pneumatic equipments. The whole structure is hot-dip galvanised, with exception of the central rotor and radial arms. The foot-boards approaching the cars consists of anti-skid aluminium tread plate. Enclosure fences are positioned along the outer perimeter of the footboards (stainless-steel). Electronically operated lighting is composed of cabochons. Sixteen cars run along the rail, connected to a central rotor by radial arms (sweeps). The cars swings due to centrifugal force during rotation, and are stabilized by a pneumatic operated brake during loading and unloading. The ride moves by means of one self-braking A.C. gear-motor controlled by Frequency Drive.

ASM model is made of cast iron construction. ASM machines are combining the user friendly features, quality and best prices as an economical model. ASM - 3 Rolls Asymetical Plate Roll Machine Standard Details Body is made of cast iron construction Central rollers powered with electric motor, gearbox and gear drive Cone bending device Self brake main motor Upper roll is opanable by side Lower roll and back roll are with hand wheels up & down adjustable. Separate eletric control panel with foot pedal Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates ASM - 3 Rolls Asymetical Plate Roll Machine Optional Features Induction hardened rolls. Back roll with motor. Digital display.

"Focquet offers three-phase induction motors in cast iron or aluminum housings. The dimensions and power correspond to the values of a standard motor, but have been modified to allow braking applications. The disc brake is supplied with direct or three-phase alternating current by a rectifier located in the motor terminal block. Our solution is always a parking brake. Standard motor size and power rating, aluminum and cast iron chassis."