Sensors for fluorescence detection - Import export

FM-30(24)-С (Curtain) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-30(24)-С (Curtain) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-30(24)-С (Curtain) have 5 frequency letters.

FM-60-C (Curtain) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-60-C (Curtain) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-60-C (Curtain) have 5 frequency letters.

The principle of operation is based on the operation of two channels working on two different physical principles of detection: bistatic microwave and bistatic infrared. Combination of two detection principles (Microwave and Infraredbeam) makes protection more effectively. An alarm is generated by crossing two detection channels at the same time. The sensors performance is the most effective on direct perimeter sectors requiring extra narrow detection zone, for example, if the sensors are installed by the top of the fence, in corridors, in areas near side-walks and roads, etc. The essential advantage of the sensors is the high interference immunity. The sensors have USB and RS-485 interfaces for work with special software. The software make it easy to start up the sensors and assures correct configuration of parameters. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

The principle of operation is based on the operation of two channels working on two different physical principles of detection: bistatic microwave and bistatic infrared. Combination of two detection principles (Microwave and Infraredbeam) makes protection more effectively. An alarm is generated by crossing two detection channels at the same time. The sensors performance is the most effective on direct perimeter sectors requiring extra narrow detection zone, for example, if the sensors are installed by the top of the fence, in corridors, in areas near side-walks and roads, etc. The essential advantage of the sensors is the high interference immunity. The sensors have USB and RS-485 interfaces for work with special software. The software make it easy to start up the sensors and assures correct configuration of parameters. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FM-42(24) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-42(24) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-42(24) have 5 frequency letters.

The principle of operation is based on the operation of two channels working on two different physical principles of detection: monostatic microwave and monostatic infrared. We use the sensor FM-30 for microwave channel of MIR sensors. That is why all the advantages and features of FM are appropriate to MIR sensors, especially: - the sensors detection zone is divided into sub zones, every sub zone can be configured separately, any sub zone can be disconnected to make secured passages for people or transport through gates. - using of special software via USB or RS-485 interfaces allows to configure correctly the sensor in-field as well as remotely from the guard room. - the sensors have 5 frequency letters allowing to install and operate them near each other. The sensors MIR-M30 have beam-shaped detection zone, that is why we recommend to use them for the protection of "frontiers".

The principle of operation is based on the operation of two channels working on two different physical principles of detection: bistatic microwave and bistatic infrared. Combination of two detection principles (Microwave and Infraredbeam) makes protection more effectively. An alarm is generated by crossing two detection channels at the same time. The sensors performance is the most effective on direct perimeter sectors requiring extra narrow detection zone, for example, if the sensors are installed by the top of the fence, in corridors, in areas near side-walks and roads, etc. The essential advantage of the sensors is the high interference immunity. The sensors have USB and RS-485 interfaces for work with special software. The software make it easy to start up the sensors and assures correct configuration of parameters. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FM-30 is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-30 detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-30 have 5 frequency letters.

FM-60-F (Fan) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-60-F (Fan) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-60-F (Fan) have 5 frequency letters.

FM-30(24)-V (Volume) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-30(24)-V (Volume) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-30(24)-V (Volume) have 5 frequency letters.

FM-60(24) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-60(24) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-60(24) have 5 frequency letters.