Electrical connectors - Import export

Stainless steel maine connectors from HUBBELL suit all marine purposes. Shore side Power Inlets Boat side Power Outlets Moulded cable assemblies,various lenght. Carrying up to 100 Amp Very resistant mechanical and electrical propreties. Data communication connectors USB, and TV plugs can be integrated. Approvals and widely used over the all world in the harbours.

The “casing” sector for the electro and electronics industry was developed as a result of demand from the lighting industry for transformer housing for NV lights. Here we can emphasise our housings for electronic mounting devices. Individual customer requirements can be realized cost-efficiently by using insert adapters. Other products for the electrical industry are connectors, strain relief and cable fastening.

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

AC connection cable 5m with Wieland plug. 5 meter mains connection cable for the AC connection of the module inverter. With this 5 meter connection cable, the inverter can be connected to the house network. Just electricity. There is a Wieland connector at one end of the cable. Simply DIY. Just plug in

5 meter mains connection cable for the AC connection of the module inverter. With this 5 meter connection cable, the inverter can be connected to the house network. Just electricity. There is a Wieland connector at one end of the cable. Simply DIY. Just plug in.

10 meter mains connection cable for the AC connection of the module inverter. With this 10 meter connection cable, the inverter can be connected to the house network. Just electricity. There is a Wieland connector at one end of the cable. Simply DIY. Just plug in.

Designed specifically for servicemen of telecommunications companies. The product consists of four compartments: In the first large compartment there are compartments in which the following items can be placed: laptop, charger, folder, with documents, cables. In the second middle compartment there is a pouch with tools. In the pouch, you can place: connector crimping tool, flat, cross-head screwdrivers, stationery knife, wire cutters, a hammer, pliers, electrical tape/zip ties, RG45 connectors, Scotchloks. In the third middle compartment there is a pouch with compartments for items: measuring device, organizer with consumables, test tube, Tone Generator, Multimeter. The fourth small compartment can include: splitters, RJ45/RJ11 sockets, stock of Scotchlocks, stock of clamps, The backpack is designed specifically for servicemen of telecommunications companies.

Replaces incandescent lamp indicators Bicolor indicators to save space Illumination of dark areas for machines or enclosures • Service life: 50,000 hours • Light type V22: 180 mcd high-luminosity bicolor LED • Type V30 light: 360 mcd high-luminosity tricolor LED • V30-SPOT light type: LED up to 34.5 lm • V30 illumination color: red/green/orange or yellow/blue • V30-SPOT lighting color: white (other on request) • Body color: black, gray, white, red, green, opal, yellow • V22 attachment: M22 screw thread with nut and seal provided • V30/V30-SPOT attachment: M30 screw thread with nut and seal provided • Mounting position: 1 ▪ Material TR90UV • Food contact: yes • Resistance to washing: yes ◦ Anti-vandalism: yes • Electrical connection V30-SPOT: 10cm cable (or other) • V22/V30 Electrical connection: 1.5mm² screwless connector • Waterproofed version CC: IP 67 and IP 69K (in 2015) • Waterproof version CV: IP 67 and IP 69K (front part only) • Temperature: -20°C to +55°C

Ultra-compact format Automatic RS485 networking with M12 connector output Deferral of all M12 connector outputs Indicator: LED indicates activation of the network Attachment: 4 M3 screws (with washers) Mounting position: 1 Material: POLYCARBONATE Electrical connection: 8 M12 connectors Sealing: IP 54 Temperature: -20 °C to +60 °C Marking: pad printing + serial number for traceability Options: - Software for real-time monitoring with openings traceability via PC (ref MDB13-SP.) - Software programming of badges and network configuration (ref MDB13-PR.) - Automatic network connection (LKS485): up to 8 cascading boxes and 4 readers per box or 32 readers. Individual contact outputs on each box - badge nail, screw, plate screw, key chain, card ... etc. Application example: access to luxury showcases with lock control and traceability

Contactless encoded electronic sensor with relay Category 3 total safety management without an external controller Suitable for groove profiles and single or double doors Level of performance without an external controller: PL = d Level of performance with AWAX controller: up to PL = e Safety category without an external controller: 3 Safety Integrity Level: SIL 2 Cycle before dangerous failure: B10d = 2,000,000 at 2A Max. activation distance: 8 mm, 3 mm hysteresis Safety contacts/diagnostics: 2 x NO 2A/48V redundant / 1 x PNP 250mA (X5) or 1xNF (X5.2) auxiliary Detection encoding: mono-code inviolable Indicator: LED indicates code recognition Reset: automatic (SR version) or Manual (AR version) Attachment: 4 tamper-proof M4 screws (optional ref: BH4). Suitable for grooved profiles. Screw caps provided. Mounting position: 1 Material: Polycarbonate Electrical connection: 1 M12 connector (X5 version) or 2 M12 connectors (X5.2 version for instant serial connection) Water resistance: IP 67/68 Temperature: -25°C to +60°C Marking: screen printed + serial no. for traceability Certification: TÜV Rheinland 01/205/5238/12 License Test Mark 968/EL 214.01/12

Activation by contact, wide range of detectable material Great ease of detection anywhere on the button Bistable function with timed lock release • Service life before dangerous failure: 40 years • Activation distance: on contact • Electrical contact: 2 PNP NF 200mA (NO powered off) • Detection of short circuit in the wires: yes • Detection of abnormal function: yes • Indication mode "on": solid red LED ring • Indication mode "off": flashing red LED ring ▪ Indication mode "error": timed offset red LED ring ◦ Trim color: red Opal green color enables lighting of the ring ◦ Attachment: 51mm bore and 2 to 6 D3 invisible screws (not included) ◦ Very low visible thickness ▪ Mounting position: 1 • Material TR90UV • Food contact: yes • Resistance to washing: yes • Anti-vandalism: yes with the new 2015 generation • Electrical connection: 1.5mm² screwless connector without • Water resistance: IP 67 with peripheral silicone seal • Temperature: -25°C to +60°C • Printing: screen printing for the reference on the back of the product

Activation by contact, wide range of detectable material Great ease of detection anywhere on the button "Momentary, bistable and time-delayed" functions configurable on PC • Number of cycles: 100 million at 200 mA • Activation distance version "L": About 17 mm (others on request) • Electrical contact: 1 PNP NO or 1 NF, 200mA/24V • Functions through SC51 software: ON/ON = momentary. Simulation of the pushbutton ON/OFF = bistable. One pulse switches the contacts and another pulse places them at rest ON/duration/OFF = delayed stop 1 to 999s offset ON "timer" function = delayed start. 1 to 9s ◦ Indication: LED ring ▪ Trim color: black, white, red, green, blue Opal green color enables lighting of the ring ◦ Attachment: 51mm bore and 2 to 6 D3 invisible screws (not included) ◦ Mounting position: 1 ◦ Material TR90UV • Food contact: yes • Resistance to washing: yes • Anti-vandalism: yes with the new 2015 generation • Electrical connection: 1.5mm² screwless connector without • Water resistance: IP 67 with peripheral silicone seal • Temperature: -25°C to +60°C • Printing: screen printing for the reference on the back of the product

Immunity to water splashes Activation without contact "Momentary, bistable and time-delayed" functions configurable on PC • Number of cycles: 100 million at 200 mA • Activation distance version "L": About 17 mm • Activation distance version "S": about 3 mm • Electrical contact: 1 PNP NO or 1 NF, 200mA/24V • Functions through SC51 software: ◦ ON/ON = momentary. Simulation of the pushbutton ON/OFF = bistable. One pulse switches the contacts and another pulse places them at rest • ON/duration/OFF = delayed stop 1 to 999s "timer" function • Offset ON = delayed start. 1 to 9s • Indication: LED ring • Bicolor LED indication by external control: version "OL" ▪ Color of the button body: black, gray, white, red, green opal. Opal green color enables lighting of the ring ▪ Attachment: M30 screw thread with nut and seal provided ▪ Mounting position: 1 • Material TR90UV • Food contact: yes • Resistance to washing: yes ◦ Anti-vandalism: yes Electrical connection: 1.5mm² screwless connector without ▪ Water resistance: IP 67 and IP 69K (front part only) ▪ Temperature: -25°C to +60°C ▪ Printing: screen printing for the reference on the back of the product