Metal sheet - Import export

With the short rail system from Alumero for trapezoidal sheet metal, module assembly is done quickly and safely. The short version with a length of only 100 mm is ideal for arranging the modules horizontally. By clamping on the long side of the frame, the best possible load capacity of the module is retained.

With the Alumero lightweight elevation, you can increase the module inclination by 5 – 7° (depending on the arrangement of the module) with trapezoidal sheet metal roofing. With only a slight roof pitch, this can noticeably increase the yield and the self-cleaning effect of the modules. The increased installation results in larger row spacing. The lightweight trapezoidal sheet elevation is based on a stronger version of the proven Alumero trapezoidal sheet metal rail with a length of 400 mm.

This flat rate for the proven Alumero substructure for pitched roofs allows you to calculate your offers quickly and easily. Please note that the individual static calculation must be made by us at the latest when you place your order.

Sheet metal folding clamps for a wide variety of folds Simple truss profile mounting due to pre-mounted rapid installation adapter Non-penetrative attachment via fixing screw Tested and statically approved sheet metal fold clamps Module can be mounted vertically or horizontally Designed for roof gradients of 7° to 60°

-CNC punching sheet up to 4 mm 1250x3000 (steel); - CNC bending up to 3000 mm (aluminium 5 mm, steel 4 mm).

TECHNICAL SPECIFICATIONS Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal, sandwich panels Connection to concrete & steel beams. MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Concrete ans steel screws Epdm rubber A270 stainless screws ERA clips nut Stainless single bracket ERA locknuts.

RAIL LAYER SIZE Short & Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal or sandwich panels MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Bimetal selftapping screws with sealing washers Epdm rubber A270 stainless screws ERA clips nut Stainless single bracket

RAIL LAYER SIZE Short & Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal or sandwich panels MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Bimetal selftapping screws with sealing washers Epdm rubber A270 stainless screws ERA clips nut Stainless single bracket

TECHNICAL SPECIFICATIONS Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal, sandwich panels Connection to concrete & steel beams. MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Concrete ans steel screws Epdm rubber A270 stainless screws ERA clips nut Stainless single bracket ERA locknuts.

RAIL LAYER SIZE Long Size SCOPE OF APPLICATION Standing seam roofs Penetration free mounting MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS A270 stainless screws ERA clips nut L bracket Standing seam clamp

3D Hubs online sheet metal processing service: Your online sheet metal cutting and bending service. Upload your CAD files, get an immediate quote and get your parts into production in less than 5 minutes. Laser Cutting & Bending: ✔ Materials: aluminium, stainless steel, mild steel, copper Online offer management: ✔ Quality assurance & certification: ✔ Delivery time: From 10 working days

 - External thread rolling: M8, M10, M12, W16.

- CNC punching: sheet up to 4mm 1250x3000 mm; - CNC bending up to 3000 mm 100T; - Sheet rolling up to 4 mm, width 1500 mm; - CNC milling with 3-axle by vertical machining centres of up to 2000x500x600 mm; - CNC milling with a 4-axle vertical machining centre of up to 2000x540x440 mm; - CNC turning, rod up to D65 mm; - CNC turning by vertical machine up to D250, L160; - Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000.

- CNC punching: sheet up to 4mm 1250x3000 mm; - CNC bending up to 3000 mm 100T.

_________

SCHOCK offers complete metal assembly systems with integrated functional components such as soft-close mechanisms, adjustment mechanisms, and mounting systems. The SCHOCK High Cabinet Full Extension, measuring 600mm in length and designed for installation in wooden cabinets with a load capacity of up to 120 kg, is available as a ready-to-install assembly: Full extension, length 600 mm Load capacity of up to 120 kg Guided both at the bottom and top Mounting brackets with front adjustment Soft-closing self-retraction with a 50 mm movement in the lower and upper guides Set packaging – pre-assembled and includes installation instructions We are also happy to manufacture other assemblies upon request according to your specifications. Length: 600 mm Load capacity: up to 120 kg Comfort features: Soft-closing self-retraction

ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.

With the Alumero lightweight elevation, you can increase the module inclination by 5 – 7° (depending on the arrangement of the module) with trapezoidal sheet metal roofing. With only a slight roof pitch, this can noticeably increase the yield and the self-cleaning effect of the modules. Elevated installation results in larger row spacing. The lightweight trapezoidal sheet elevation is based on a stronger version of the proven Alumero trapezoidal sheet metal rail with a length of 400 mm.

With the Alumero lightweight elevation, you can increase the module inclination by 5 – 7° (depending on the arrangement of the module) with trapezoidal sheet metal roofing. With only a slight roof pitch, this can noticeably increase the yield and the self-cleaning effect of the modules. Elevated installation results in larger row spacing. The lightweight trapezoidal sheet elevation is based on a stronger version of the proven Alumero trapezoidal sheet metal rail with a length of 400 mm

This flat rate for the proven Alumero substructure for pitched roofs allows you to calculate your offers quickly and easily. Please note that the individual static calculation must be made by us at the latest when you place your order

- CNC bending up to 3000 mm 100T; - bending of threaded rods up to D12.

- Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000.

- CNC punching: sheet up to 4mm 1250x3000 mm; - CNC bending up to 3000 mm 100T; - Sheet rolling up to 4 mm, width 1500 mm; - CNC milling with 3-axle by vertical machining centres of up to 2000x500x600 mm; - CNC milling with a 4-axle vertical machining centre of up to 2000x540x440 mm; - CNC turning, rod up to D65 mm; - CNC turning by vertical machine up to D250, L160; - Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000; - Flat grinding: 200x500mm; - External thread rolling: M8, M10, M12, W16.

- CNC bending up to 3000 mm 100T, - Rod bending up to 16 mm, - Tube bending up to 30 mm; - Sheet bending.

At given need our experts can invoke extensive subcontracting.

----------

- Flat grinding: 200x500mm.

- CNC punching: sheet up to 4mm 1250x3000 mm.

- CNC bending up to 3000 mm 100T; - bending of threaded rods up to D12.