Mixers - Import export

We can offer our clients the rental of analog mixers that will prove themselves during the organization of conferences or small concerts. The Soundcraft EPM6 analog mixers offer 6 mic inputs, 2 stereo TRS inputs and 2 AUX sends. The devices are characterized by high sound quality and ease of use, so there is no need to involve a person responsible for technical service. The set, in addition to the blender in a cover, also includes a power cord.

The modern mixer tap is uniformly integrated into the caravan interior - so everything stays in place even when en route.

LIS B135L - DIY concrete mixer ideal for small projects Bucket with 2 double kneaders Cast iron rack and pinion reinforced mouth Bearing box on the outside of the bucket unloading system pedal brake

Manual Concrete Mixer Sirl 1600 Number of speeds: 2 Thread Dimension: M14 Ergonomically designed with 4 protective rubbers Easy mixer removal

Static Mixers for high viscosity / low Reynolds number flows

Equipment for accurate additive injection and dosing

Static Mixers for insolubale fluids

Static Mixers for low viscosity / high Reynolds number flows

Reliable temperature conditioning of viscous media up to 10.000.000 mPas

Installation of static IMV mixing elements in a pipe DN 1400 mm for dispersing of a 10% w/w ozone/oxygen-gas stream into fine bubbles. This results in a large interfacial gas/liquid contact area and thus a high ozone absorption rate of the ozone in the water stream to be treated is achieved. The ozone/oxygen-gas stream is added through the side-nozzle DN 200 mm. Mixer is made of stainless steel AISI 316L (= 1.4404), pickled and passivated. This static mixer IMV DN 1400 mm is installed in a water treatment plant in France, for pre-ozonation of 1500-8000 m3/h water with 1g/m3 ozone. Pre-ozonation Static Mixer D1400mm forTreatment of 1500-8000 m3/h Water.Outlet-side of the Ozonation Mixer IMV DN.

Static mixer GXM für admixing of a low viscous additive to a viscous liquid/melt.

DN 35mm O.D. = 34,7mm x 110mm long, made of PP.

Mixer Pipe (O.D. = 30mm, Wall = 3mm, Lenght = 450mm) Mixer and Pipe made of PP.

dia. and length 7.9 mm each, made of stainless steel 1.4542 (= 17-4 PH or A630) are now available from Stamixco’s stock. These static mixing elements are often installed into spinning plates of man-made fibre plants. Also a frequent application is in paint finishing systems for in-line mixing reactive paint components in the paint feed-hose just upstream the spray nozzle.

The GXR Static Mixer (Licensee of Bayer, AG) is used for mixing, dispersing and homogenization of viscous materials. It is a high performance motionless mixer design that creates a very high degree of mixing in a short length. It is capable of mixing materials with very large differences in viscosity and volumetric ratios. Mixing Capabilities Mix fluids with similar viscosity Mix high and low viscosity fluids (1 million : 1) Mix fluids with large differences in volumetric ratio (1,000 : 1) Disperse and mix polymers with blowing agents Thermal homogenization Viscosity homogenization Applications Two (2) component viscous materials such as Liquid Silicone Rubber (LSR), adhesives, polysulfide, sealants, epoxy resins, polyurethanes, etc. Plastics Injection Molding Plastics Extrusion Polymer manufacture and processing The mixing elements may be safely pressed out of the housing by pushing on the support ring which avoids any damage to the mixing grid The GXR mixing elements are presently also available in inexpensive plastic construction (50% glass-filled Nylon and polypropylene) Helical Static Mixer The HT helical static mixer pioneered the inline motionless mixing industry over 40 years. It is a cost effective static mixer design with moderate mixing performance capabilities. It is most suitable for use in small diameter turbulent flow and laminar flow applications where the mixing task is simple and where it’s characteristic features of low pressure drop and open geometric structure are best for the specific application. For difficult applications, the high performance GX static mixer is recommended for laminar flow applications. The Helical static mixer is available in metal and plastic construction in a wide variety of configurations and sizes.

StaMixCo manufactures a wide variety of plastic disposable static mixers for 2-component (2K) meter-mix-dispense applications. The available product range is under constant development. So please do not hesitate to contact us directly for specific requests. X-Grid Plastic Disposable Static Mixers (High Performance) For difficult mixing applications where materials to be mixed have large differences in viscosity and volumetric ratio or when a very high degree of mixing is required, the X-Grid static mixer designs are best. The X-Grid family of static mixers has the characteristic feature of an X-Grid crossing bar structure. They are best suited for difficult mixing applications where the components to be mixed have large differences in viscosity or volumetric ratio and where a very high degree of mixing is required. These demanding applications are often found in the processing of adhesives, varnishes, urethanes, sealants, liquid silicone rubber (LSR), polyols, etc. The GXF plastic disposable static mixer is available in a 10 mm diameter size with 6, 9 and 12 mixing elements. It is used for processing small flow rates in difficult meter-mix-dispense applications such as adhesives, varnishes, urethanes, sealants, liquid silicone rubber (LSR), etc. The GXP plastic disposable static mixer is available in a 9.4 mm diameter in 50% glass filled Nylon and polypropylene construction. It is used for processing small flow rates in difficult meter-mix-dispense applications such as adhesives, varnishes, urethanes, sealants, liquid silicone rubber (LSR), etc. The GXR-P plastic static mixer is available in a 30.1 mm size in 50% glass filled Nylon and polypropylene construction. It is used for processing large flow rates in difficult meter-mix-dispense applications such as adhesives, varnishes, urethanes, sealants, liquid silicone rubber (LSR), etc. The industry standard helical plastic disposable 2K static mixer is available in a very wide range of diameters, number of mixing elements, configurations and materials. It is most suitable for easy to moderate difficulty meter-mix-dispense applications. Static Helical MixerDN 35mm O.D. = 34,7mm x 110mm long, made of PP Static Helical Mixer with 4 helical elements and a total length of 110 mm for bores/pipes with I.D. of 18 to 34.7 mm, made of PP. Available in standard diameters of 18, 20, 25, 30, 34.7 mm or on request in special diameter in the range of 18–34.7 mm. Applications: Disposable static mixer for 2-components (2K) metermix-dispense, for pH-adjustment with acid or caustic (neutralisation) in watertreatment or for general mixing duties with fluids not corroding PP. Helical static mixer with fins O.D. = 24mm Mixer Pipe (O.D. = 30mm, Wall = 3mm, Lenght = 450mm) Mixer and Pipe made of PP.

The GX static mixer has been used successfully for the laminar flow mixing and/or dispersion of viscous fluids for over 35 years. It is a high performance static mixer capable of mixing materials with equal or very large differences in viscosity and volumetric ratio. Mixing is accomplished in a short length with a very high degree of mixing. Mixing Capabilities Mix fluids with similar viscosity Mix fluids with high and low viscosity (1 million : 1) Mix fluids with large differences in volumetric ratio (1,000 : 1) Disperse and mix polymers with blowing agents Thermal homogenization Viscosity homogenization Applications Polymer manufacture and processing. Two (2) component viscous materials such as Liquid Silicone Rubber (LSR), adhesives, polysulfide, sealants, epoxy resins, polyurethanes, etc. Plastics Extrusion Materials of Construction, Housings and End-Connections The GX static mixer can be supplied in most materials of construction, pipe/tube housings with virtually any end connection (Figure #13). GX-P mixing elements in 9.3 - 9.4mm outside diameter size are also available in plastic construction. History of GX Static Mixing Structure The GX static mixer was invented by Bayer AG of Leverkusen, Germany in the mid 1970’s. Bayer used the GX static mixer extensively in their polymer plants and subsequently licensed the design to Sulzer Chemtech of Winterthur, Switzerland who trademarked the design as the SMX* static mixer. Sulzer did a tremendous amount of fundamental high quality R&D work on the SMX structure and commercialized the SMX static mixer in tens-of-thousands of successful installations. The founders of StaMixCo held key technical and management positions in the Koch Engineering (the later Koch-Glitsch)-Sulzer Chemtech team that commercialized the SMX static mixer. Bayer licensed their 2nd generation of the SMX static mixer to StaMixCo which is branded as the GXR structure with integral support ring around the X-Grid mixing bars as described in a previous section of this web site. * StaMixCo is not a distributor of or affiliated with Sulzer Chemtech. SMX is a brand and trademark of Sulzer Chemtech.