Sheathed cable - Import export

PE-FOAM SKIN INSULATED, STAR-QUADS, WITH REINFORCED SHEATH The cable is designed for use as railway signalling cable, preferable for the connection of railway connection boxes

Low-smoke, zero-halogen, flame-retardant power cable. For fixed indoor installation as well as in concrete, but not for direct burial in ground or application in waterThe aluminum cores with section 2,5-50mm2 inclusive are produced with one wire of 1 class flexibility, 70-240mm2 inclusive with twisted multi-core wires 2 class flexibility, according to standard IEK60228 : 2004. According to customer requested, it’s possible to produce cross sections 16:50 with multi-core wires. Number of cores in the cable 1,2,3,4,5in case of supply in bundles the construction length is agreed with the customer. In case of agreement with the customer cables of different construction lengths can be producedLabel attached to wooden drum or bundle, or in case of request of the customer with inscription on top: “JSC Sakcable” cable brand, date of production. Labeling of resistance cores with colors or with numbers

For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For stretching in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forcesThe aluminum cores with section 2,5-25mm2 inclusive are produced of single wire of 1 class flexibility according to Gost standard 22483-2012. Number of cores in the cable 2,3.The aluminum cores with section 2,5-25mm2 inclusive are produced of single wire of 1 class flexibility according to Gost standard 22483-2012. Number of cores in the cable 2,3.

Low-smoke, zero-halogen, flame-retardant building wire for installation on and under plaster, in cable ducts and conduits. For indoor use onlyCopper wire cross-section 1.5-6mm2 are made with single-core with 1 class flexibility, according to the standard IEK60228:2004; Cross-section 16:35mm2 are made of twisted multi-core with 2 class flexibility, according to the standard IEC60228:2004. Cable is round. It’s possible to Production with flay constructionThe insulated cores are made of different colors, an inscription is made on the cover of the conductor “JSC Sakcable” cable brand, year of production. The wires differ by insulation color or by digits.

Used as control cables and supply lines in machine engineering, plant engineering, enameling lines, power stations, air conditioning, cool systems, office machines and data precessing systems. Mainly suitable for dry, damp or wet interiors, especially in industrial environments at medium mechanical stress. Outdoor use with UV-protection only and in observance of the temperature ranges. Suitable for free, not continously returning movement without tensile stress or compulsory guidance as well as for fixed laying. GLOBALFLEX®-COLD is mainly used for cold-flexible applications due to cold-resistance up to -30°C.

To be used as halogen free, flame retardant and environmentally power, control and connecting cable in electrical facilities, in fire vulnerable areas and facilities with high concentration of people and proberty values, for fixed laying and flexible applications without tensile stress and without defined cable routing. Suitable for use in dry an humid rooms. Outdoor use only with UV-protection, no laying underground. The copper braided screening prevents electrical and magnetic interference of the control cable with the environment and of the environment with the internal cable cores.c

GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).

GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).

Use: Designed for soldering or crimping on mineral insulated sheath cable or crimping on insulated wire. Construction: Brass machined, nickel plated insert with 0.1 mm tolerance on the cable OD.

Application: Crimp-insert can be fitted in the entrance hole of the connector. Designed for soldering or crimping on mineral insulated metal sheathed cable or crimping on insulated wire. Construction: • Brass machined insert with 0,1 mm tolerance on the cable O.D. The adapter fits in all standard connectors.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Ceramic housing with contacts of original thermocouple materials and 
spring-loaded sockets for reliable contact . • Reverse polarity protection by different contact pin widths. • Oversize screw head for easy wiring. • One-piece housing withstands great stresses. • Housing of high purity alumina oxide.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection

Typical applications: Furnace, boiler and chimney doors, expansion joints, cable sheathing. E-glass is the basic material for isoGLAS®. Texturing guarantees a large storage volume and thus good insulation properties. isoGLAS® products are extremely textile and harmless to health. Available dimension: 3 - 30 mm.

• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered

The slimline probe LMK 306 with ceramic sensor has been especially designed for the continuous level measurement at confined space conditions. Permissible media are clean or slightly contaminated water and thin fluids. Different cable sheath materials are available in order to achieve maximum media compatibility. Features: — nominal pressure: 0 ... 6 mH2O up to 0 ... 200 mH2O — accuracy: 0.5 % FSO — diameter 17 mm — excellent long term stability — suitable for hydrostatic level measurement e.g. 3/4" pipes — excellent linearity Optional Features: — different cable materials — customer specific versions e.g. special pressure ranges Preferred areas of use: — level measurement at confined space conditions — ground water monitoring — depth or level measurement in wells — drinking water abstraction — level measurement in open and closed tanks

PE sheets and foils for reinstating and insulation of buildings Foils from HD-PE a LD-PE are manufactured in: Colour: black or colour. Double-sided smooth finish. Processed materials HDPE LDPE HDPE, or high-density polyethylene, is under ordinary circumstances a material of milky colour that differs from other polyethylene types by higher strength and ductility. Since the material is more consistent, the foils and packages produced from it are stronger. The HDPE bag thus has a higher load capacity than a LDPE bag of identical thickness. This is beneficial in the production of very thin bags; HDPE bag thickness is from 7 micrometers. In addition to flexible packages, HDPE is also a very suitable material for strong packages. Best-known allocations are cosmetic bottles (detergents, shampoos), and cans. HDPE is used also in technical applications, e.g. as septic tanks, in the production of pipes, and for sheathing of cables and harnesses. Septic tanks may have very complicated...

Cable RTD sensor for clamp-on The Cable RTD sensors of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable sensors is their process connection, the operating temperature range and the insulation material of the connecting cable. Execution: clamp-on variant Process connection: copper block, Teflon coated, Ø 26 x 18 x 15 mm Temperature range: -50 … +200°C Material: copper / Teflon Sheath - Ø: – Cable material: Teflon IP protection class: 54

Cable thermometer using RTDs The cable temperature assemblies of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable assemblies is their process connection, the operating temperature range and the insulation material of the connecting cable. Execution: clamp-on variant Process connection: copper block, 8 x 10 x 40 mm, with Ø 3mm MI-cable Temperature range: -50 … +300°C Material: copper / stainless steel Sheath - Ø: – Cable material: Elexar ( £ 105 °C) IP protection class: 54

Cable RTD sensor for screw-on The cable RTD sensors of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable sensors is their process connection, the operating temperature range and the insulation material of the connecting cable. Execution: clamp-on variant Process connection: brass block, 5 x 5 x 25 mm Temperature range: -50 … +150°C Material: brass Sheath - Ø: – Cable material: Tefzel IP protection class: 54

The new UNI Dicht TRI achieves the highest shielding attenuation values over the complete frequency range and convinces with a very high current carrying capacity for the reliable discharge of undesirably high shielding currents. The installation is simple and safe: only the cable sheath has to be removed at the contact point where the shielding braid is to be contacted. As soon as the cable is inserted into the cable gland, the TRI spring makes reliable contact with the cable shield, even in the case of non-circular or off-centre cables. In any case, this type of contacting from PFLITSCH means that the cable shield does not have to be exposed until directly at the connection point in the control cabinet. Because the shielding braid remains 100% intact, maximum shielding attenuation is achieved and the useful signals are transmitted without unnecessary interference from noise signals.

HAWKE 501/453/UNIVERSAL - the only "upgradable" Ex d gland in the world. It offers installers the unique opportunity to upgrade the diaphragm seal to a barrier type gland, whereby a seal is formed around each individual cable core. The HAWKE 501/453/UNIVERSAL Ex d cable gland is suitable for cables that exhibit "Cold Flow" characteristics. It provides a patented diaphragm seal on the cables inner sheath to avoid damage especially of soft and flame retardant cables. Available materials: Brass, Nickel plated brass, Stainless Steel 1.4404, V4A, 316L, Aluminum Types of Protection: Ex db IIC Gb, Ex eb IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. Explosion-proof acc to ATEX/IECEx Protection grades: IP66, IP67, IP68 (30 metres for 7 days), IP69, Deluge Protected DTS01, NEMA 4X

Power cable with copper cores, XLPE insulation, PVC or polymer halogen free composition sheathed power cable, shield: copper foil, tape or braids, armour: zinc-coated steel wire, aluminium tape, zinc-coated steel tapes.Application: these cables are suitable for indoor and outdoor installation, in air and ground, where the cables should be flame retardant and halogen free. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free

Stable bandwidth up to 2000MHz Cat8 Lan cable ensures stable network speed. Even during network peak hours, you can surf the Internet flexibly with Cat8. 4x faster network speed The Cat8 Ethernet cable supports 40Gbps BASE-T standard and is 4x faster at network speed than standard Cat7 cables which support 10Gbps. Excellent shielding effect Compared to the usual plastic jacket of UTP cable, The High-Speed Ethernet cables with PVC sheath and multiple aluminum foil provide strong shielding. Gold-plated RJ45 connectors protect the cable from external electromagnetic interference.

PE-FOAM SKIN INSULATED, STAR-QUADS, WITH REINFORCED SHEATH The cable is designed for use as railway signalling cable for long distances, with high resistance against vibrations

Distribution optical cable with a central strength member made of FRP rod in PE sheath; around it are stranded tubes containing up to 24 optical fibers each, filling dummy tubes (if necessary), insulated copper conductors, with intermediate PE sheath, with water-blocking tape, laminated aluminum PE tape; with an armor made of steel corrugated tape and outer PE sheath. Operational temperature of the cable is from -60°С to 70°С. Minimum temperature for installation is -30°С.