Shot blasting machines - Import export

Iepco AG is a Swiss production, trading and service company. For over 40 years, we have been primarily involved in the mechanical and galvanic surface treatment of metallic machine components and mould tools. In extensive research work, we have developed surface technologies that allow a special working technique. This enables us to achieve a high degree of surfaces that are suitable for production. Thanks to this economical method, production costs can be reduced enormously in a wide variety of application areas.

The CS-TC suspended load shot blasting machine was developed for the surface treatment of medium and large parts. The turbines are placed on either side of the blasting chamber according to the optimal configuration to cover the parts to be treated. This shot blast machine can be installed in line with painting equipment.

Parts and accessories for the treatment of metal surfaces. We offer a wide range of wear parts and accessories, for the vast majority of machines in our market, manufactured by European partners, with high demands, in order to match or exceed the quality and resistance of the parts. of the brand. We offer parts for the following brands: AGTOS, ALJU, BERGER, BLASTEC, BMD, BRUCK, CARLO BANFI, CM MODENA, COGEIM, CORIO, COSER, DISA, EUROBLAST, GEORG FISCHER, GIETART-KALTENBACH, GOSTOL, GUTMANN, HUNZICKER, JAPÓN, MEBUSA, OMSG, PANGBORN, ROSLER, RUMP, SCHLICK, SIRSI, SPENCER HALSTEAD, STEM, TECNOBLAST, TILGHMAN WHEELABRATOR, TOSCA, TRIMMER, TURBOTECNICA, VOGEL+SCHEMMANN, WALTHER TROWAL, WHEELABRATOR.

It is the preferred blasting machine for blasting unnecessary materials that do not have bumps while blasting together. Parts can be sandblasted together or separately. While driving the rubber band pieces rotating between three different drums, the sandblasting process takes place with the turbine located at the top.

It is a type of sandblasting machine produced for the purpose of sandblasting the outer surface of pipes, tubes, shafts, and similar materials. The outer surface of the diameters of 20mm (1/2”) to 3048mm (120”) pipes can be sandblasted with a pipe blasting machine. You can contact our sales representatives for in-pipe sandblasting solutions. Pipe blasting machines are produced with different equipment according to the needs, and some standard dimensions are as follows:

It is a type of sandblasting machine used mostly for the purpose of sandblasting sheet metal, profile, and steel constructions in the manufacturing sector. The conveyor is manufactured as a roll or wire band depending on the need. Tunnel-type sandblasting machines are primarily preferred for preparation before painting in integrated facilities.

Steel construction, metal, etc. with a high production capacity. It is the type of sandblasting machine preferred by companies in the production sector. The conveyor system is designed as trolleys carrying hanger hooks on a linear line. Different conveyor types are preferred according to light and heavy materials.

Shot blasting is used for the production of metal parts subject to repetitive and cyclical stresses (landing gear, suspension parts, welding, engines, etc.). Faced with major safety constraints and problems of lightening the parts used, the interest of this technique is to be able to increase performance, slow down corrosion and increase the durability of the parts without increasing their weight. Our specialists can assist you in the development of your materials and products and in the control of industrial risks. At Mecasem, we have the latest shot blasting technologies at our disposal in order to best meet our customers' requirements. Our suspended load shot-blasting machine allows us to obtain a more varied range of impacts and opens up new perspectives for use.

New Swan and Gunma Seiko (Japan) has entered into Technical Assistance Agreement for manufacturing of Cold Forged Parts of Aluminium and steel. Gunma Seiko is pioneer in manufacturing of Cold forged parts since decades. With joint aim of New Swan and Gunma Seiko (Japan)to cater Automotive sector, has entered into the ‘TAA’ to serve the automotive sector with Quality and Competitiveness. The plant is ready for production and machinery available for cold forging is Knuckle joint presses, Semi automatic bonding line, Annealing facility, Shot blast machines etc.

Continuous blasting – Excellent, highly automated processing The selected blasting medium is directed towards your workpieces at high speed using blast wheels. This ensures high blasting performance and optimum use of energy. Using this technology in a continuous process offers several advantages over batch processing: — Continuous workpiece feeding — Easy to integrate into production processes — Simplified parts flow That is why our continuous belt blasting units are frequently used to replace conventional batch systems. With their easy workpiece handling and excellent blasting results, they are even used as replacements for suspended-line systems.

O CAST GEARS O CAST BUSHİNGS O DRYER RİNGS O HOOK CASTİNGS O BEARİNG HOUSİNG CASTİNGS O FAN CAST BODİES O CYLİNDER BARREL CASTİNGS O CAST FASTENERS O MİXER PART CASTİNGS O SHOT BLASTİNG MACHİNE PAR

Due to the different thermal tempering, steel shot blasting abrasives type WIWOX® SK obtain different hardness classes from 40 – 43 HRC, 54 – 60 HRC up to greater than 61 HRC. Because of the different degrees of hardness, the steel shot in the operating mixture keeps its angular shape or becomes round during the application process.

WIWOX® SD rounded cut wire shot is mainly used for cleanblasting and shot peening. Depending on the quality of the raw material used, different hardness classes are obtained. We supply non-corrosive cut wire shot that meet the requirement of particularly high demands. Cylindrical cut wire shot blasting abrasives are cut from wire. The length of the grain is equal to the diameter. Grain shapes of different roundness are produced through the subsequent rounding of the cylindrical raw material, rounded from G1 – G3. Cut wire shot has a particularly long service life and are known for low dust generation.

Due to its extreme hardness, WIWOX® SG high-carbon cast steel abrasive reaches an extremely high blasting intensity right from the start. It is produced in a melting process and gets its round shape through the subsequent atomising process. The metallic structure of this low-carbon cast steel abrasive is decisive for its long service life.

ASCO dry ice blasting is not just a cleaning process but a package of complete solutions. Over 20 years of experience in the dry ice blasting field and a highly motivated team have led ASCO’s dry ice blasting technology to the place where it stands now. With the ASCO dry ice blasting technology we follow ASCO’s philosophy to provide complete and individual solutions tailored to the specific needs of our customers. Such individual solutions can start with a single dry ice blasting machine and lead to more comprehensive cleaning system that increase overall quality and flexibility and give production and cost savings. Our team and a worldwide network of sales partners guarantee individual consultation and service. We will be pleased to also find the right solution for you.

• Smallest and lightest CO2 blasting machine of the world • Compressed air consumption maximum 250 l/min • CO2 consumption maximum 0.08 kg/min • Powerful • No power supply necessary, as driven pneumatically • Maintenance-free • For cleaning of soot, flux residues, semiconductors, electrical components, ...

At given need our experts can invoke extensive subcontracting.

A wet blasting machine is a deviceused for cleaning surfaces by removing dirt, paint, orrust. It operates by combining pressurized water with a special abrasive material. It features a self-heating water capability and can use hot water and detergent. An intense mixture of water and abrasive is directed on to the surface, ensuring effective cleaning. It is commonly employed in industrial sectors and requires the use of appropriate protective equipment.

Blasting is a structure-generating process for matt or satin-gloss surface structures. Small surface imperfections in the material can be concealed by the abrasive effect of stainless steel balls, which hit the material with the help of air pressure. Hand blast cabinet MHG Maximum measurements 2000 x 1000 x 1000 mm Blast cabinet Maximum measurements 400 x 400 x 200 mm

The process is performed in closed chambers, where a jet of millions of glass microbeads, moving in a stream of compressed air, is directed on the product surface using a specialized gun. The abrasive removes all contaminants from the surface without changing the part geometry or damaging the product. It allows even fragile materials to be handled gently with this method. Controlled plastic deformation of the metal surface forms a light work-hardening that improves the service performance of the product. Due to the matting effect, this method is often used for finishing aluminum parts.

Beam machine for irradiating a glass sheet conveyor belt Transport device supporting roller guide, motor nozzle movement, infinitely variable, attached dust filter system and electronic Control. Max. Lens height for automatically rays 1.200 mm Max. Lens height for manually rays 1.500 mm

The injector-glass-blasting cabin is operated by hand with a gun. A blast-collecting collector ensures a smooth blasting circuit within the system. With the help of roller rails, as well as through-slots (on the side and in the roof surface with special brushes against the penetration of dust), surface treatment of glass panes is easy. On the front side there is an easy-open loading door for radiating hollow glass bodies. A work grate and two shock-proof long-field lamps (for glare-free illumination of the blasting chamber) guarantee a smooth workflow. The foot switch as well as the drain cup on the blasting agent funnel, an attached control box with pressure reducing valve and pressure gauge, motor protection switch, on / off button, solenoid valve, control lights, switches for interior lighting, main switch, emergency stop switch and support control ensure uncomplicated operation.