Condenser - Import export

CS condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the CS cyclone separator it is essential to install automatic or electronic condensate drain. CS cyclone separators are also available in stainless steel version CS-SS.

WOS CD is intended for systems, where amount of generated condensate exceeds capacity of single largest available WOS water oil separator. WOS CD can evenly distribute collected condensate between up to three WOS 35 water oil separators. WOS CD is equipped with flow distributor on the inlet port, up to 8 hose tail connections mounted on elbows for convenient outlet, manual ball valve for cleaning purpose and vent port for safe aeration. Optional wall mounting kit is available. Maximum capacity in regard to free air delivery, when connected to WOS-35 is 120 Nm3/min.

MCD is designed for the discharging of condensate or any other non aggressive fluid from compressed air system. In order to prevent condensate from re-entering in the airstream we recommend controlling the condensate level in filter bowl, which requires an automatic drain trap. MCD is easy to install on the filter housing. MCD can be used in variety of applications.

IED drain series is designed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The series is designed to discharge condensed water from filter housing primarily. Condensate accumulates in the bottom of filter housing. Fluid level is detected by precise capacitive level sensor. When the level is high enough condensate is being discharged from the system without any air losses. IED drain series is also equipped with led indicator and test button.

Electronic condensate drains EMD series is designed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The units can be installed as external drain on any application specified. Condensate accumulates in the collecting reservoir. When the level is high enough condensate is being discharged from the system without any air losses. Fluid level is detected by precise capacitive level sensor. Special self-cleaning direct acting valve assures reliable operation. Electronic condensate drains - EMD series is also equipped with operation alarm, led indicator, test button and internal strainer. Version with Service Network for diagnostics parameter setting and alarm output is also available.

SFH condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the SFH cyclone separator it is essential to install automatic or electronic condensate drain. SFH cyclone separators are also available in stainless steel version SFH-SS.

AOK 50SS has been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The unit can be installed as external drain on any application specified below. Condensate accumulates in the stainless steel reservoir and is discharged from the system when the level is high enough. A direct acting valve is operated by a precise level controlled floater which assures reliable and efficient operation. Thanks to its robust stainless steel housing AOK 50SS is suitable for heavy duty applications. On the front, the AOK 50SS, is also equipped with a separate manual drain for venting.

AOK 50B has been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The unit can be installed as external drain on any application specified below. Condensate accumulates in the aluminium reservoir and when the level is high enough condensate is being discharged from the system. Direct acting valve is operated by precise level controlled floater which assures reliable and efficient operation. Thanks to light aluminium housing AOK50B for ease mounting and is also suitable for heavy duty applications. On front side AOK50B is also equipped with separate manual drain or venting.

EMD HP series drain have been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The units can be installed as external drain on any application specified below. Condensate accumulates in the collecting reservoir and when the level is high enough condensate is being discharged from the system without any air losses. Fluid level is detected by precise capacitive level sensor. EMD HP series is also equipped with operation alarm (version A), led indicator, test button and internal strainer. Version with Service Network (version C) for diagnostics and parameter setting is also available. Working hours, valve operations and other operating parameters are stored in internal memory and can be read with Service Network reader.

Timer controlled condensate drain TD420M is designed for reliable removal of condensate or other liquid from high pressure compressed air system. Discharge intervals can be set with two adjustment knobs. TD420M drain is available with a kit for easy installation which enable us to mount it in many different positions. Timer controlled condensate drain TD420M can be used in variety of applications. For applications not listed please contact us or your local dealer.

AOK20 SS is designed for fully automatic discharging of condensate or any other non aggressive fluid from compressed air system. For any other technical gas please contact us or your local distributor. The unit can be installed as external drain on any application specified below. Condensate accumulates in the stainless steel reservoir and when the level is high enough the condensate is discharged from the system without any air loss. A direct acting valve is operated by a precise level controlled floater which assures reliable and efficient operation. Thanks to its robust stainless steel housing AOK20 SS is suitable for heavy duty applications. On the front, the AOK20 SS, is also equipped with a separate manual drain for venting.

AOK20 has been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The unit can be installed as external drain on any application specified. Condensate accumulates in the aluminium reservoir and when the level is high enough condensate is discharged from the system without any air losses. Direct acting valve is operated by precise level controlled floater which assures reliable and efficient operation. Thanks to robust aluminium housing AOK20 is suitable for heavy duty applications. AOK20 is also equipped with separate manual drain for venting. AOK20 can be used in variety of applications. For applications not listed please contact us or your local distributor.

Automatic mechanical condensate drain AOK 13PA has been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The unit can be installed as external drain on any application specified below. Condensate accumulates in reservoir and when the level is high enough condensate is being discharged from the system without any air losses. Direct acting valve is operated by precise level-controlled floater which assures reliable and efficient operation. For any other technical gas please contact us or your local dealer. Automatic mechanical condensate drain AOK 13PA can be used in variety of applications. For applications not listed please contact us or your local dealer.

AOK16B is designed for fully automatic discharging of condensate or any other non aggressive fluid from compressed air system. For any other technical gas please contact us or your local distributor. AOK16B is easy to install inside to the filter housing. AOK16B can be used in a variety of applications. For applications not listed please contact us or your local distributor.

TD M timer controlled condensate drain is designed for reliable removal of condensate or other liquid from compressed air system. Discharge intervals can be set with two adjustment knobs. TD M drain is available in several types based on operating pressure and operating medium. TD M can be used in variety of applications. For applications not listed please contact us or your local dealer.

Refrigeration dryers RDT have been designed to effectively separate water from the compressed air thus lower pressure dew point all the way down to +3 °C. The main difference between RDP and RDT series is that RDT has timer controlled drain instead of an automatic drain. Drying is achieved on the principle of cooling which takes place inside a highly efficient and ultra-compact 3 stage heat exchanger. In the first stage (air-air heat exchanger) hot and humid inlet air is being pre-cooled by the cold outgoing air. In the second stage (air-refrigerant heat exchanger) intensive water condensation takes place due to the cooling of the air. All condensed water is separated from the main compressed air stream in the third stage by the integrated demister. A proven and robust design enables efficient and reliable operation, fast installation and simple maintenance.

Refrigeration dryers have been designed to effectively separate water from the compressed air thus lower pressure dew point all the way down to +3°C. Drying is achieved on the principle of cooling which takes place inside highly efficient and ultra-compact 3 stage heat exchanger. In the first stage (air-air heat exchanger) hot and humid inlet air is being precooled by the cold outgoing air. In the second stage (air-refrigerant heat exchanger) intensive water condensation takes place due to cooling the air. All condensed water is separated from the main compressed air stream in the third stage by the integrated demister. A proven and robust design of refrigeration dryers enables efficient and reliable operation, fast installation and simple maintenance.